What upgrade that you would recommend for Web design?

Similar Questions

• What tablet that you would recommend?

  I normally photo editing and some graphics design work for the web, but yesterday I went to follow a video tutorial on the use of the new mixture brush in Photoshop CS5, and I think I might just be hung on the conduct of a more sophisticated art work...

  

  50 years ago, my mother doesn't have oil painting.  I never quite "got" what she saw in the work with oils until now and of course this modern Photoshop technology makes it a lot less smelly and dirty (and certainly faster)...  I've done the above with my mouse only, in a few hours and now it is clear to me that the pressure and dynamic angle would be useful with this kind of work.

  Then...  I think I need a tablet.

  What model tablet you get results with the?

  We hear about many problems (e.g., with drivers Wacom, etc.) here on the forum, but we hear fewer successes.

  I'm running Windows 7 x 64 Ultimate, Photoshop CS5 Standard and have two monitors.

  Thanks in advance for sharing your experiences.

  -Christmas

  Noel,.

  I was happily using a Wacom for over a decade now. I started with an ArtZ II (series) and have added more over the years. I think my last was an Intuos 3. Everyone loves. I had a driver problem, and Wacom had a new driver according to the tablet that was, before they could respond to my e-mail address, what they did. Some RF interference from monitors to double from 21 "to close, and the next upgrade Intuos took care of this. Again, I have my first Wacom and use quite often.

  I like the large shelves, but real estate office for them. I also 'draw' with my arm and not my fingers, so do not put the tablet in my Tower, I like the large shelves. I have a 4 x 6, and he often don't get used. It's just me, however. Many like the smaller tablets, but more to shoot with their fingers and also as the tablet in their laps.

  Personally, I wouldn't even look at another Tablet, but that's because that appreciate were so very good to me.

  In another thread, someone said that Wacom was a case that Corel Painter included. If there never use painter, it is a great program and is different enough to PS, I keep versions updated on all my machines.

  Good luck

  Hunt

  PS - once you go to a Tablet, you will never, ever go back, so just be prepared.

• This power supply that you would recommend for this HP desktop computer?

  http://h30434.www3.HP.com/T5/monitors-and-video/how-can-I-get-three-monitor-Setup-with-this-HP-deskt...

  I need to get more watts for a better graphics card. What would you recommend and is it complicated? Is this possible with these HPs BTX? What tutorial do you recommend? Thank you.

  Hello

  Modular power supplies will allow you to choose the cables which are just required to meet the needs of your particular PC. They will come with a lot of cables, but generally, you won't need all the cables.

  Several power supply rail (bus) have advantages and disadvantages. I like a design simple rail because it requires no extra effort when considering electric charge distribution. You still have the size of the size of the power to your specific needs.

  All power could potentially cause your PC to burn.

• Sound of wind - what ear canal headphones $30 that you would recommend?

  When I go out to walk, there is a hill which is usually windy, so I want to buy headphones ear canal to solve the problem of noise from wind...  Sony headphones that I use currently are the kind that sit in the ear but don't go into the ear canal, and the wind noise is terrible.

  My requirements are:

  1 frequency response flat without course focusing on the bass.

  2. comfortable in the ear canal.

  3 Symetrical cords for both ears.  I can't stand the asymmetrical cords that put all the weight of the rope on one ear, and loose the cable to the other ear thongs around my face when walking, especially in the wind.

  4. no volume control in the rope that just adds weight to my ears.

  5. No cords running with extension like the Sony MDR-EX75 has.  The EX75 has a Plug and the plug of the cord to connect the power cord runs in a device, cuff and an extension to plug in a device size or Pocket.  The plug and the socket just adds extra cord weight when it is used with a rocket or my size mp3 player.

  Any suggestions?

  Thank you

  Sky

  Hi PolloLoco,

  I wasn't able to find the Meelec HAVE-M9 on amazon, and since I ordered everything from there, I wanted to buy headphones from amazon also.  I checked head - fi.org by your link and you are right.  It contains a wealth of information on headphones.

  For beginners like me, head-fi site has a thread that explains everything you always wanted to know about memo in the ear, also called in-ear monitors (IEM).  I found the EMP of cushions of Air of JVC-HAFX66 through this Web site.  I found also a youtube comment that shows the construction of the HAFX66 and how it seems that inserted in the ear.  Here is the link:

  http://www.YouTube.com/watch?v=V8PRU6tI3_k

  This video shows the FX66 has symmetrical cords.  An important part of the FX66 is actually a soft material that fits into the outer ear.  It is the function of "air cushion".  The air cushion is supposed to also reduce the noise of the rope in the ear that is going to be great because I will mainly use them all by running the exercise.  From the looks of the FX66 in the ear (in the youtube video), it seems the cushions of air could also help block the wind which is one of my major concerns.

  The HAFX66 sells for $19.58 on amazon which is quite cheap to take a chance on them.  The reviews on amazon are very good with the smallest number of negative comments (percentage wise) compared to all the other IEMs I checked on amazon.

  Thanks a lot for your help.
  Sky

• What is the longest cable that you can use for a webcam If you want to move a piece

  What is the longest cable that you can use for a webcam If you want to move a room, you want to use as a granny cam

  I get up to a cable of length more camera more and then peripheral is not is not recognized. I Yawcam program on my computer which is optimal

  for a web camera to use invisably.

  According to the official FAQ USB. page here:

  http://www.usb.org/developers/usbfaq#cab1 ,

  5 m is the maximum length of a USB cable. A lot of points 3 and 4 on the above page dealing with how to deal with scenarios beyond this length.

  Personally, I have only ever went up to 4.8 m and it was with an external hard drive (which had its own separate power supply).

• Where did my design go?  I created 4 pages for web design and I was finishing up the home page, all the other 3 pages have simply disappeared, the layers are empty? I spent 4 days design that... How to make that back?

  Adobe Muse: Web design.

  Where did my design go?  I created 4 pages for Web design and I was finishing up the home page, all the other 3 pages have simply disappeared, the layers are empty? I spent 4 days design that... How to make that back?

  I restarted the laptop,

  creates a new document and quickly made 3 new pages... and yet once... These pages have disappeared?

  Please provide a quick solution for me because I have to present my work to the customer.

  Did you remove all traces of high level in the layers (i.e. "layer-1") Panel?

  When something like you describe is reported, most often the user does not understand the layers of high level exist across all pages and updates on the page of your site. If you delete "Layer 1" you may remove the content of all pages of your site.

• How to change folder name by default when you use save for Web in java script?

  Hello everyone, hope you can help me.

  
  

  Photoshop has a folder name by default of images When you export using slices Save for Web . I need to change this folder name.

  How to change folder name by default when you use save for Web in java script?

  Thanks in advance!

  
  

  

  

  
  

  JJMack Chuck Uebele Nicolas Ribot SuperMerlin
  

  You can try with scriptlistener to record the code. Change to the last line of the NO to ALL dialog boxes, so that the dialog - if you wish. There are two places in the code to save the files: one where is actually saved the file, and the other where the default value is file. I have seen it changed something with it. So, you can simply use the first listing of a path in the code below.

  #target photoshop
  
  var idExpr = charIDToTypeID( "Expr" );
      var desc19 = new ActionDescriptor();
      var idUsng = charIDToTypeID( "Usng" );
          var desc20 = new ActionDescriptor();
          var idOp = charIDToTypeID( "Op  " );
          var idSWOp = charIDToTypeID( "SWOp" );
          var idOpSa = charIDToTypeID( "OpSa" );
          desc20.putEnumerated( idOp, idSWOp, idOpSa );
          var idDIDr = charIDToTypeID( "DIDr" );
          desc20.putBoolean( idDIDr, true );
          var idIn = charIDToTypeID( "In  " );
          desc20.putPath( idIn, new File( "C:\\Users\\csuebele\\Pictures\\LR shortcuts" ) );//Here's where it actually saves
          var idFmt = charIDToTypeID( "Fmt " );
          var idIRFm = charIDToTypeID( "IRFm" );
          var idPNtwofour = charIDToTypeID( "PN24" );
          desc20.putEnumerated( idFmt, idIRFm, idPNtwofour );
          var idIntr = charIDToTypeID( "Intr" );
          desc20.putBoolean( idIntr, false );
          var idTrns = charIDToTypeID( "Trns" );
          desc20.putBoolean( idTrns, true );
          var idMtt = charIDToTypeID( "Mtt " );
          desc20.putBoolean( idMtt, true );
          var idEICC = charIDToTypeID( "EICC" );
          desc20.putBoolean( idEICC, false );
          var idMttR = charIDToTypeID( "MttR" );
          desc20.putInteger( idMttR, 255 );
          var idMttG = charIDToTypeID( "MttG" );
          desc20.putInteger( idMttG, 255 );
          var idMttB = charIDToTypeID( "MttB" );
          desc20.putInteger( idMttB, 255 );
          var idSHTM = charIDToTypeID( "SHTM" );
          desc20.putBoolean( idSHTM, false );
          var idSImg = charIDToTypeID( "SImg" );
          desc20.putBoolean( idSImg, true );
          var idSWsl = charIDToTypeID( "SWsl" );
          var idSTsl = charIDToTypeID( "STsl" );
          var idSLAl = charIDToTypeID( "SLAl" );
          desc20.putEnumerated( idSWsl, idSTsl, idSLAl );
          var idSWch = charIDToTypeID( "SWch" );
          var idSTch = charIDToTypeID( "STch" );
          var idCHsR = charIDToTypeID( "CHsR" );
          desc20.putEnumerated( idSWch, idSTch, idCHsR );
          var idSWmd = charIDToTypeID( "SWmd" );
          var idSTmd = charIDToTypeID( "STmd" );
          var idMDCC = charIDToTypeID( "MDCC" );
          desc20.putEnumerated( idSWmd, idSTmd, idMDCC );
          var idohXH = charIDToTypeID( "ohXH" );
          desc20.putBoolean( idohXH, false );
          var idohIC = charIDToTypeID( "ohIC" );
          desc20.putBoolean( idohIC, true );
          var idohAA = charIDToTypeID( "ohAA" );
          desc20.putBoolean( idohAA, true );
          var idohQA = charIDToTypeID( "ohQA" );
          desc20.putBoolean( idohQA, true );
          var idohCA = charIDToTypeID( "ohCA" );
          desc20.putBoolean( idohCA, false );
          var idohIZ = charIDToTypeID( "ohIZ" );
          desc20.putBoolean( idohIZ, true );
          var idohTC = charIDToTypeID( "ohTC" );
          var idSToc = charIDToTypeID( "SToc" );
          var idOCzerothree = charIDToTypeID( "OC03" );
          desc20.putEnumerated( idohTC, idSToc, idOCzerothree );
          var idohAC = charIDToTypeID( "ohAC" );
          var idSToc = charIDToTypeID( "SToc" );
          var idOCzerothree = charIDToTypeID( "OC03" );
          desc20.putEnumerated( idohAC, idSToc, idOCzerothree );
          var idohIn = charIDToTypeID( "ohIn" );
          desc20.putInteger( idohIn, -1 );
          var idohLE = charIDToTypeID( "ohLE" );
          var idSTle = charIDToTypeID( "STle" );
          var idLEzerothree = charIDToTypeID( "LE03" );
          desc20.putEnumerated( idohLE, idSTle, idLEzerothree );
          var idohEn = charIDToTypeID( "ohEn" );
          var idSTen = charIDToTypeID( "STen" );
          var idENzerozero = charIDToTypeID( "EN00" );
          desc20.putEnumerated( idohEn, idSTen, idENzerozero );
          var idolCS = charIDToTypeID( "olCS" );
          desc20.putBoolean( idolCS, false );
          var idolEC = charIDToTypeID( "olEC" );
          var idSTst = charIDToTypeID( "STst" );
          var idSTzerozero = charIDToTypeID( "ST00" );
          desc20.putEnumerated( idolEC, idSTst, idSTzerozero );
          var idolWH = charIDToTypeID( "olWH" );
          var idSTwh = charIDToTypeID( "STwh" );
          var idWHzeroone = charIDToTypeID( "WH01" );
          desc20.putEnumerated( idolWH, idSTwh, idWHzeroone );
          var idolSV = charIDToTypeID( "olSV" );
          var idSTsp = charIDToTypeID( "STsp" );
          var idSPzerofour = charIDToTypeID( "SP04" );
          desc20.putEnumerated( idolSV, idSTsp, idSPzerofour );
          var idolSH = charIDToTypeID( "olSH" );
          var idSTsp = charIDToTypeID( "STsp" );
          var idSPzerofour = charIDToTypeID( "SP04" );
          desc20.putEnumerated( idolSH, idSTsp, idSPzerofour );
          var idolNC = charIDToTypeID( "olNC" );
              var list4 = new ActionList();
                  var desc21 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerozero = charIDToTypeID( "NC00" );
                  desc21.putEnumerated( idncTp, idSTnc, idNCzerozero );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc21 );
                  var desc22 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNConenine = charIDToTypeID( "NC19" );
                  desc22.putEnumerated( idncTp, idSTnc, idNConenine );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc22 );
                  var desc23 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwoeight = charIDToTypeID( "NC28" );
                  desc23.putEnumerated( idncTp, idSTnc, idNCtwoeight );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc23 );
                  var desc24 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc24.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc24 );
                  var desc25 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc25.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc25 );
                  var desc26 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc26.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc26 );
          desc20.putList( idolNC, list4 );
          var idobIA = charIDToTypeID( "obIA" );
          desc20.putBoolean( idobIA, false );
          var idobIP = charIDToTypeID( "obIP" );
          desc20.putString( idobIP, """""" );
          var idobCS = charIDToTypeID( "obCS" );
          var idSTcs = charIDToTypeID( "STcs" );
          var idCSzeroone = charIDToTypeID( "CS01" );
          desc20.putEnumerated( idobCS, idSTcs, idCSzeroone );
          var idovNC = charIDToTypeID( "ovNC" );
              var list5 = new ActionList();
                  var desc27 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzeroone = charIDToTypeID( "NC01" );
                  desc27.putEnumerated( idncTp, idSTnc, idNCzeroone );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc27 );
                  var desc28 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwozero = charIDToTypeID( "NC20" );
                  desc28.putEnumerated( idncTp, idSTnc, idNCtwozero );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc28 );
                  var desc29 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerotwo = charIDToTypeID( "NC02" );
                  desc29.putEnumerated( idncTp, idSTnc, idNCzerotwo );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc29 );
                  var desc30 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNConenine = charIDToTypeID( "NC19" );
                  desc30.putEnumerated( idncTp, idSTnc, idNConenine );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc30 );
                  var desc31 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerosix = charIDToTypeID( "NC06" );
                  desc31.putEnumerated( idncTp, idSTnc, idNCzerosix );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc31 );
                  var desc32 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc32.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc32 );
                  var desc33 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc33.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc33 );
                  var desc34 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc34.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc34 );
                  var desc35 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwotwo = charIDToTypeID( "NC22" );
                  desc35.putEnumerated( idncTp, idSTnc, idNCtwotwo );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc35 );
          desc20.putList( idovNC, list5 );
          var idovCM = charIDToTypeID( "ovCM" );
          desc20.putBoolean( idovCM, false );
          var idovCW = charIDToTypeID( "ovCW" );
          desc20.putBoolean( idovCW, true );
          var idovCU = charIDToTypeID( "ovCU" );
          desc20.putBoolean( idovCU, true );
          var idovSF = charIDToTypeID( "ovSF" );
          desc20.putBoolean( idovSF, true );
          var idovCB = charIDToTypeID( "ovCB" );
          desc20.putBoolean( idovCB, true );
          var idovSN = charIDToTypeID( "ovSN" );
          desc20.putString( idovSN, """c:\photos""" );//Here's where the default folder is suppose to go.
      var idSaveForWeb = stringIDToTypeID( "SaveForWeb" );
      desc19.putObject( idUsng, idSaveForWeb, desc20 );
  executeAction( idExpr, desc19, DialogModes.ALL );
  

• Best version of PS for Web design

  Hello! I'm a budding web deisgner. What is the best version of photoshop that have the features necessary to complete Web design projects quickly and accurately?

  For web design, I think that the full version of photoshop or elements will work fine. Elements will make more hand holding with assistants, etc., but her brother has more power without holding a hand. Meaning that it can take more than a few steps, but more as a profession can normally do off.

  What neither can do is svg graph, which would require illustrator and/or edge animate. (Normally graphics are created in illustrator and animated on the edge)

• When you use "Save for Web" with slices, it puts the images exported to a/images folder. Can I turn that off?

  I don't want to create a new folder/images every time I export images. I just want to export directly into the folder I specified.

  Is it possible to change this? I could not find a way.

  Thank you!

  In the save for Web dialog go to the dropdown menu, click change output settings and under saving files, uncheck the Set of Images in the folder

  

• What happens if you're underlicensed for MRS.

  So I'm a consultant, and I just finished a SRM installation for a client who still uses the old by proc license model, which has two licenses for more that he needs.

  He asked me 'what happens to my existing configuration, if I add a 4 socket to the cluster server, it would break everything and if not, he would break, which would be protected, which would not be.  If I had a disaster which could I see any more, anything / any thing/nothing? »

  If anyone knows the effect of hitting SRM licensing limits in each CPU model your info would be thank you very much.

  SRM 4.1 if you use a proc license so if you try to protect a virtual machine on a host which until now has NOT hosted any other protected the computer virtual hosting will have been allocated MRS. keys... SO... when you are trying to protect a virtual machine on that host THAT SRM will try to assign the exact number of keys per-proc to the host. If you have not enough keys to allow fully all procs on the host, the task will succeed, but from that point on the client will be harassed by SRM (event generation in vCenter) permanently, to remind them that they are now in the violtation of the license and need to allocate more keys.

  If you had the same scenario but they key in use were eval keys NOT buying keys then when the eval expires his game more than you would NOT be able to protect ANY more VM and you would again be harassing messages to tell that you are now in violation of the EULA. Note If your EVAL key expires in production it's a BIG problem if you have 'forgotten' to buy a real key because we will also prevent failovers occur.

• That you can recommend?

  An SSD will you recommend?

  If you are always online and cloud services are enough for you, you can go with the 128 GB model.

  If you use your computer to office or school and you mainly store documents, presentations and spreadsheets on your MacBook and some photos, 256 GB will suffice.

  If you are going to use your new MacBook as your main machine and that you plan to store all sorts of things on it (movies, all your photos, documents), I recommend you go for the 512 GB version because it allows you to store all your stuff on your MacBook.

  TIP: Check how you use now and whether it be a deciding factor.

• Request that you be selected for the trial of impregnation.

  If you take your personal time to participate in surveys and to respond to their e-mails and REQUEST that they not lose your time and aquirer then your personal information. They do nothing, they are just the collection of personal information and nothing more. Look at the website that collects your information "surveymonkey.com. Your giving them the right to share with the 3rd party, because you think you would have the chance to test the new software coming for a little personal information. Wise up people. Nothing but trouble with Motorola, the customer service and here in the forums. This company is a piece of work. Excellent material will give them that.

  We collect the information necessary for the purposes of the Motorola feedback network opportunities. Information is not shared with all 3 parts. Signing up is voluntary. Selection is at the discretion of the directors of Motorola feedback network. Some possibilities are offered to all eligible members and others are accessible only to members who have consistent feedback through previous occasions.

  Mark
  
  Forums Manager

• What version of SQL is recommended for vCenter

  I work some of the largest projects we have 9 esxi hosts 10-12 VMs and Vcenter will be loaded onto a physical machine with SQL server and I was wondering what version of SQL is recommended. We are looking for in SQL 2008 or 2005 either 64-bit or 32-bit and I was looking for advantages and disadvantages for each option.

  Thank you

  If you want to use the composer, then you must go to SQL 2005, because 2008 is not supported.

• Is it possible to preset on high JPEG when you use "save for Web". » ?

  Hello

  I use photoshop elements 10. When I'm ready to save the image under "SAVE for WEB" can I preset it 'JPEG HIGH' cos right now it will pop up in "GIF".

  When I use the PSE2, I am able to launch as JPEG HIGH. Now, I have to click the popdown menu to select 'JPEG high '.

  You need to right click the icon of the PSE Bureau and choose "Run as Administrator".

  Then, open an EPS file, use save for Web, and change all the settings to what you prefer. Hold down the Alt key and the 'Done' button will change to a button "Remember." Click it, and then save your image. The settings will be saved and you don't have to rerun PSE as an administrator.

  Ken

• 13 "pro for Web design

  Hey guys!

  I thought getting a macbook pro 13 ". I got a pretty sweet offer for one so I want to consult you if he would deal with the design work. Basically I'm a UI designer and 90% of the time that I do websites and app designs. Somethimes my files get enough big and heavy up to 500-600 MB per file, and now I use Photoshop CC. I intend to switch to sketch when I get the Mac, so I would like to know if some of you have this experience.

  Here are the specs of Mac:

  MacBook Pro 13 "retina mi 2014:

  2.6i5

  128 GB SSD

  Iris 1536 MB Intel

  8 GB 1600 Mhz DDR3

  It is difficult to do anything within 128 GB of storage space. In my opinion, 128 GB of storage can hardly be large enough to support something more than browsing, emailing and sometimes to type a letter.

  In addition, it is difficult to create and test web sites on a 13 inch screen.

  My recommendation would be to get a computer 15 inches with at least 256 GB of storage. Even more storage would be preferable. 8 GB of RAM would work but 16 GB would be better. RAM cannot be improved after the purchase of the computer. Multitasking requires more RAM.