When the combination of the quality of the images is less

Similar Questions

• Acquisition of CL crashes when the image is too light?

  I have a strange problem and I can't be sure either the camera or the Board of Directors: basically, in any method of execution, when the image is too light, the acquisition stops and I get a timeout in MAX. It is with a PCIe-1433 and Point grey Gazelle. Blockage of the camera and restarting acquisition works very well. This occurs at any time, that the majority of the image gets to 80% brightness.

  To make things more confusing, this can sometimes be corrected by the passage of cable (the same 5 meters OR cable model, but just another); now, however, I have a couple of cameras that show that all cable and so I need to get it figured out. It would certainly be a problem of camera or a combination and so I contact PMP as well. Anyone has any ideas on this? Thanks in advance for any info!

  I would suspect that your CameraLink cables cannot meet performance requirements for speed of clock and the distance, that you are running. Unlike most new buses at high speed, the underlying mechanism of encoding on the wire for CameraLink has a characteristic resistance to noise (even among his own peers) depends somewhat on the actual data values are transmitted. Since the frame control signals are passed in the same channel as the content of the image itself, if there is some noise/interaction between them on the wire, they could cause problems of behavior on the side of the acquisition.

  If your camera supports the lowering of the frequenency of the clock, you might be able to check that helps the behavior. If it does, I recommend trying to replace the cables with superior quality-those. The CameraLink Committee now has a test of official certification of cables which is very comprehensive. I would say in ensuring that the cables you are using are actually tested for these certification tests.

  Eric

• Hallo why? When I update ios. When the image has finished error itunes and usb

  Hallo why? When I update ios. When the image has finished error itunes and usb

  Connect the iPhone to the computer that you are synchronizing usually with

  and follow the prompts to iTunes on this computer. If you

  do not generally in sync with a computer, you should always use

  iTunes on a computer to complete the update.

• A3 landscape artboard. When the zoom is less than 100%. the appearance of the work (lines) in staircase, I can tell this resolution because something I have to zoom and it disappears. I understand the difference between vector and raster as well... looks

  A3 landscape artboard. When the zoom is less than 100%. the appearance of the work (lines) in staircase, I can tell this resolution because something I have to zoom and it disappears. I understand the difference between vector and raster so... this kind of problem is like when you zoom too in an image and it becomes pixelated... but otherwise...! I have a macbook pro 2012 model, the retina. is my screen resolution. I thought that the apple screen product meet good standards of adobe creative products... Reviews

  Check if the switch between the GPU and CPU makes a difference: Cmd E

  Or turn in the preferences: GPU performance.

• How to load something when the image appears

  Hello. I have a load_swf button that does this:

  swf_path = "sample.swf"

  load_swf.onRelease = function() {}

  loadListener.onLoadProgress = {function(target_mc:MovieClip,_bytesLoaded:Number,_bytesTotal:Number):Void}

  info.text = Math.round ((bytesLoaded/bytesTotal) * 100) + "%";

  };

  loadListener.onLoadInit = {function(target_mc:MovieClip):Void}

  info.text = "";

  };

  var mcLoader:MovieClipLoader = new MovieClipLoader();

  mcLoader.addListener (loadListener);

  mcLoader.loadClip (swf_path, swf_loader);

  };

  I want to do without having to press the button. I want to do when the image appears on the screen. Something like OnClipEvent (load) the problem is that I do not know how to convert this code works with OnClipEvent (load), can you help me?

  use:

  swf_path = "sample.swf"

  loadListener.onLoadProgress = {function(target_mc:MovieClip,_bytesLoaded:Number,_bytesTotal:Number):Void}

  info. Text = Math.round ((bytesLoaded/bytesTotal) * 100) + "%";

  };

  loadListener.onLoadInit = {function(target_mc:MovieClip):Void}

  info. Text = "";

  };

  var mcLoader:MovieClipLoader = new MovieClipLoader();

  mcLoader.addListener (loadListener);

  mcLoader.loadClip (swf_path, swf_loader);

• Avoid the display of the Red Cross when the image is absent

  The images from loading user on my web site.
  He can enter 3 images; but sometimes it does that 2.
  When an image is missing, the browser try to find and display a small red cross in the left corner. My concern was to avoid the display of this small red cross when the image is not there?
  I tried nested HTML and PHP code, but it does not work.
  Y at - there someone who can help me?
  Thank you very much.

  Gary,
  Finally, I solved the problem by setting the value of the border to 0. Now everything is OK.
  Thanks again.

• Loss of quality when the image resizing

  I want to resize an image to make it smaller, but going to the size of the image and use that diminishes the quality. My original image is 370 x 193 pixels. How do I resize without quality loss?

  Are what resampling method you using?  Automatic work probably, but you start with a certain file smale, so going smaller is forced to lose details.

  

• Continuous text blurry when the image is placed in the graphic block

  I've been using InDesign for over a year and love the software. One thing continues to drive me crazy and I don't know whats going on.

  Essentially when I add a picture in a page layout, often (but not always) the text continuous blur similar to anti-aliasing is disabled (it is not). He has just done again this morning. I laid out a drop business card, text or crispy. I add a graphic block and everythings still OK. I have put my PSD file in the chassis and bang hazy continuous text. If I select and delete the graphic block text sharpens once again to the top.

  I had a lot of situations where he does the same thing, but also sometimes when it is not. I don't see any clear link between what I (or I'm not) do and why this happens. Also, I considered that it was just a display issue and it would be nice when sent to the PDF format, but the quality of the text in a PDF document is noticeable, less with the chart than without it even to the 'press' of quality.

  Any help and suggestions appreciated.

  Jon

  Check the pages Panel and see if there is a check next to the page. This indicates the transparency in the PSD.

  Is your psd have a transparent background?

  Try to open the psd and save in tiff format.

  Select your image in photoshop and create a path. Change the path for a clipping path.

  Save it as a tiff file.

  Place the tiff.

  Go to object > Clipping Path Options

  Choose the path that you created in photoshop.

  The text is still unclear? Just need to check that it is actually the PSD which is the cause, and what makes a flat tiff with a clipping path will clear up if it is.

  You just need the transparent background if you put the picture on one color other than white, usually. So if the image does not need transparency or transparency background leave it flattened with a white background, while maintaining a clipping path if you need it.

  PSD files are usually very good to place and use in InDesign.

  Well hope that helps something here.

• Using 5.7 LR on a Mac, how do I file to display when the image import?

  Something has changes on my Mac using Lightroom 5.7. When the import images the file management section does not appear in the right column. Show the other sections (change file name, of the apply during import and Destination). What can I do to recover the management of files, which is necessary to create a backup copy of my images on another hard drive.

  Right click on one of the other section headers. In the context menu that appears, make sure that there is a check mark in the management of files.

• Why size folio remains even when the images are sized down?

  In the constant battle to reduce the size of folio, I found and removed an image of print size wandering (40 MB) and replaced with a 2 MB file but my folio always claims the same size when I see the next update. Any idea out there, why a folio will hang on its size in this case.

  Thanks in advance

  Because we automatically resize the images to 108ppi in the dimensions in pixels of the image container. A 40 MB print image does not pass through to the folio as 40 MB. He'll get sampled down.

  Neil

• Disable the scroll bar when the content is less than the viewport?

  Hello
  
  I have a vertical scroll bar has always shown (JScrollPane.VERTICAL_SCROLLBAR_ALWAYS).
  but I want that it should be disabled when the content in the display is lower at the height of the viewport.
  
  For example, browser Chrome in Windows: when you open Google, the content of the page is fairly low in height and scrolling in Chrome bar will be disabled. As soon as you have enough content on the page of the scrollbar will be active.
  
  How can I achieve this?
  Thank you

  Hello

  It isn't really a problem, I just know that it is a limitation of the SWING, (...)
  Almost all app have this behavior; It is not very nice visually.

  I don't have Chrome and haven't seen this problem until now, anywhere (but it is true, I'm way behind in terms of GUI mode).
  The behavior that I'm used to (and which Swing designers apparently supposed to be standard too), which is a scroll bar disappears when the width of the view does not justify it ( SCROLLBAR_AS_NEEDED ). Using SCROLLBAR_ALWAYS implies that you want to the scroll bar, no matter if the width of the merit. How the scroll bar looks like in this case sounds like a look and feel selection instead (I don't have older OSs, but maybe you know an operating system where this behavior is the norm? In this case, Yes, this is a limitation of the corresponding Swing L & F).

  Maybe there is a work around.

  Because this isn't the OS Lebanese armed forces, which can be "manually coded", by listeneing to resize events and thus change the appearance of the ScrollBar.
  Assuming that the "disabled" appearance scroll bar is what you are looking for (no idea, it's just an example, if that do not meet your needs, you can do something else in the placeholder code), here is one, certainly dense enough, workaround.
  Notice how the vertical and horizontal scroll bar is different (I applied workaround only to the latter).

  import java.awt.BorderLayout;
  import java.awt.GridLayout;
  import java.awt.event.ActionEvent;
  import java.awt.event.ActionListener;
  import javax.swing.JButton;
  import javax.swing.JFrame;
  import javax.swing.JLabel;
  import javax.swing.JPanel;
  import javax.swing.JScrollPane;
  import javax.swing.JTextArea;
  import javax.swing.event.ChangeEvent;
  import javax.swing.event.ChangeListener;
  
  public class TestDisableScrollBar extends JPanel
  {
      private static final String SHORT_TEXT = "text";
      private static final String LONG_TEXT = "texttexttexttexttexttexttexttexttexttexttextte";
  
      private static void createAndShowGUI()
    {
          JFrame frame = new JFrame("Demo");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JTextArea textarea = new JTextArea(5, 5); // just to take up some space.
          final JLabel label = new JLabel(SHORT_TEXT);
          JPanel view = new JPanel();
          view.setLayout(new GridLayout(2, 1));
          view.add(label);
          view.add(textarea);
          final JScrollPane widget = new JScrollPane(view, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS, JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
          widget.getHorizontalScrollBar().setEnabled(false);
          widget.getViewport().addChangeListener(new ChangeListener() {
              public void stateChanged(ChangeEvent e) {
                  widget.getHorizontalScrollBar().setEnabled(
                          widget.getViewport().getWidth()<
                          widget.getViewport().getView().getWidth());
              }
          });
          frame.getContentPane().add(widget, BorderLayout.CENTER);
          JButton alternateText = new JButton("Switch width");
          alternateText.addActionListener(new ActionListener() {
              public void actionPerformed(ActionEvent e) {
                  label.setText(label.getText().equals(SHORT_TEXT)?
                      LONG_TEXT : SHORT_TEXT);
              }
          });
          frame.getContentPane().add(alternateText, BorderLayout.SOUTH);
          frame.pack();
          frame.setVisible(true);
        }
  
      public static void main(String[] args) {
          javax.swing.SwingUtilities.invokeLater(new Runnable() {
              public void run() {
                  createAndShowGUI();
                }
            });
      }
  
    }
  

• How to avoid the transparent background, white in smart object (psb) conversion when the image track high fidelity that we have the ability to ignore track of white up to 16 colors.

  I have an image psd file in photoshop cc 2014 the layer background transparent. I wanted to convert to vector. The best option I've seen was converted first to a smart object in photoshop by layer-> Smart objects-> convert to smart object. then he exported a CPS. Then I opened the file in illustrator and applied image tracking tool, but the background transparent got converted to white but I had the option to skip white up to 16 trace of color. But in the case of Conversion of high fidelity, the option do not know white is not available, what do I do now?

  After using the Trace of the Image and expand the result, just find a part that is filled with white and use Select > same > fill and just delete.

• I see no photos when it is on EBAY. I can see them in Chrome and explore, but not Firefox. It says Image is not available when the image should be.

  When I'm on EBAY (or other sites besides) in the region where there should be pictures, I get a message saying:
  Image not available

  This just started a week or two ago. I am able to see the fine images by using other browsers, but not Firefox. Any suggestions?

  Oh... If it affects all sites, please read this article: solve the problems that cause to not show images.

• Satellite A200-24 c (PSAE6) - display crashes when the images are zoomed

  Dear Sirs, I can't believe that there is no solution for the product that you produce. As my Toshiba I bought 14 months ago and try to fix it. I have a problem with my map displays 'ATI Mobility Radeon HD 2600' when I see photos with Windows Photo Gallery and try to enlarge... display screen will hang and go with black and red blocks!

  I tried to install all kinds of windows (XP - Vista Basic Ultimate). I tried to download all versions of catalyst for the version 6 and 9.7. So what is happening!

  Do you know that most of my friends and the people hated the Toshiba brand because of this bad reputation on the market... remember that Toshiba laptops with Nvidia graphics card doesn't have the same problem. Please please please help me!

  Your prompt response will be highly appreciated.

  Sincerely,

  Hello!

  You have installed the Catalyst 9.7 driver. Don't know that this driver doesn't have protection against overheating and could destroy your graphics card?
  I would recommend so install the latest driver of display on the Toshiba site. These drivers are pre-tested on your laptop.

  In addition, I would try to update the BIOS. AFAIK some A200 models are special BIOS available for XP and Vista version.
  Check and update the BIOS!

  Good bye

• Smart guides are not displayed when the image resizing while now shift

  When I resize an image that is next to another image and I want to make both the same height smart guides will not appear until I'm holding on shift key (to keep the aspect ratio). If I let go shift guides work without problem but then my image starts to deform. As soon as I press SHIFT the guide goes...

  Is this a bug? Is it possible to fix this?

  [Moved from all Adobe lounge to a specific support by product - MOD forum]

  As I wrote this seems to be the way of all versions of Photoshop that has a guide to chip works.  I don't think it's a bug.  You can try to report it as a bug or request a change on the site of Adobe's Photoshop family feedback.