When the course Advanced Admin makes its appearance on the VIEW

Similar Questions

• Put links to video files in web pages - want option 'Open with' when the viewer clicks on the links.

  If I go to a video file that is stored in my computer, for example xyz.mp4 and right click on it, one of the options is 'Open with' and several options for example QuickTime player, RealPlayer are presented for me to choose. But when I add the file to a web page and create a link to it for example http://sillyvideos.com/xyz.mp4 and then I right click on this link (on the web page) in my Firefox browser, I don't get the option 'open with '. My question is: is it possible to put a link to a video in a web page, so I or other viewers can click right on it and benefit from the option 'open with' (so we can choose the drive to open it, without having to download first in our computers)?

  Normally what happens, is that the server sends the content with one or more headers that dictate what Firefox did with the video.

  For example, if the content is sent with a header that Firefox can play internally, then Firefox can open the video in a tab and use a built-in player. You can see with MP3s when the server says that it is "audio/mpeg" content. However, if the server sends a content type that a capable of handling plugin, Firefox can attempt this plugin.

  Normally Firefox will assume that the content is meant to be displayed in the browser, unless it is an unknown type or has a content-disposition header set to "attachment". In these cases, Firefox usually has open/save/Cancel dialog box.

  I don't know what kinds of choices you want to offer visitors to your site, but if you thought giving them a choice of the players external , sending to content-disposition: attachment to make appear the probably the most logical open/save/Cancel dialog box. With smaller files such as JPEG and PDF, I did it with a script on the server side (for example, a PHP script). I don't know if the script would work with multimedia files.

  If you want to provide more choices, you might need the buttons or links in the page.

  This example applies to a PDF file, but the same idea applies to the image files and it can work with files more mainstream media. (In this case, you change the script to specify the correct content type.)

  Implementation of the PHP approach, you follow these steps. This assumes that your server supports PHP (most do so) and that your Web host allows you to download PHP files.

  (1) save the following as getpdf.php file

  http://www.jeffersonscher.com/RES/getpdf.php.txt

  (2) using a FTP software or your server download function, copy getpdf.php into the same folder as your PDF file

  (3) test with your link. In the address bar, or in an e-mail, insert the following text before the name of the PDF file:

  getpdf.php?f=
  

  Thus, for example, this direct link to the PDF:

  http://www.jeffersonscher.com/RES/Mixed_Content_Blocking.PDF

  would become this link to the PHP file:

  http://www.jeffersonscher.com/RES/getpdf.php? f =Mixed_Content_Blocking.pdf

• When the VIEW additional sites will become available for testing Oracle?

  I have to drive 30-80 miles away to find a place to take an oracle certification.

  However on January 1, all microsoft certifications exams switch Prometric to view.

  Has he been reflected on the expansion of the VIEW sites because of this migration tests in VIEW of PROMETRIC.

  It will become almost impossible to find an open slot.

  Roger

  
  

  user6862024 wrote:

  I have to drive 30-80 miles away to find a place to take an oracle certification.

  However on January 1, all microsoft certifications exams switch Prometric to view.

  Has he been reflected on the expansion of the VIEW sites because of this migration tests in VIEW of PROMETRIC.

  It will become almost impossible to find an open slot.

  Roger

  NB: I agree with the above response to Matthew.  I'll add a couple of my thoughts for what it's worth.

  Pearson VIEW have a FAQ about this here:

  http://pearsonvue.com/Microsoft/ms_pvue_transition_faqs.PDF

  In general, if a major player moves between Prometric to Pearson VIEW then some testing centers can convert from Prometric to Pearson VIEW or some that feed both can move to some workstations based on demand.

  I think it's all, or at least in part on security additional Pearson VIEW offers in comparison to the Prometric.  This is a big reason why Oracle spent previously and why pilot possible for microsoft to spend now.  This is certainly the case some test are additional security requirements of Pearson VIEW too much pain and went to Prometric only.  And if they do not attract the required candidate numbers for Pearson VIEW it not worth their offer.  But of course if there are more candidates Pearson VIEW in France via Microsoft there is more motivation for a center to provide Pearson VIEW; but their may be a shift in what is happening until it takes.

  If there is not one close to you and you think that their should be a sufficient demand in your area directly contacting Pearson VIEW attempt.  (I'm not such Microsoft have a clone of the "Brandye" never useful supportive on Pearson VIEW if there is a gap in the town of wholesale).  Probably a 30 mile drive is generally acceptable... If it could be 25 min for some and 2.5 hours to others.  Some Aussie and others can talk in terms of hundreds of miles...

  If you keep an eye through the first part of the programming of examination, you should be able to get a feel to determine when exams are available in your local test centers and how long you "usually" to book in advance.   There is generally little trouble, but if targeting the end of a Beta of Oracle or committed to one particular to get the review reserved at first just in case there are any other circumstances which could cause a spike in other programs of certification on the test center decides to a blackout temporary for some reason any (some colleges and other companies may have times when they will not offer reviews).

  In any case, these are some of my thoughts.

• My google calendar makes its appearance as a tile on the left side of the screen. I can't fill the screen, and it remains standing when I'm on other pages.

  This has just begun. Before, if I went to Google Calendar, it came just like any other web page. Now, it is continuously on the left edge, show and it jammed so I can't read. I tried to increase the size by dragging on the line between it and the full page, but it won't get no bigger.

  Sorry, I forgot that Firefox 25 and 26 have a bug that prevents you from removing the check mark to load a bookmark in the sidebar.
  
  This problem is fixed in 27 of Firefox, but for now, you need to delete the bookmark and create a new bookmark.

• Help! Duller version of the image makes its appearance in LR 5

  I would be very grateful if someone can help out me. I have a weird situation with one of my engagement sessions, when I import into Lightroom 5: when I click on 'developing', whenever I click on one of the photos, he is said to "loading" for a few seconds and then produced a duller version looking for photography (less than bright colors, almost a little desaturated/flat etc.) There is nothing in 'history' and when I click on 'y' for before and after, there is no change - just the dull image of both sides of the split screen.

  I tried to delete the photos and then import again, but it continues to be.

  Any ideas? I appreciate ALL the help; trying not to panic!

  Since this is the forum of Lightroom for beginners, I'll assume that you are new to using Lightroom.  Much more information about your situation would be useful.  But, assuming that you have turned your session in raw, what you see is completely normal.  Lightroom does not read a lot of the camera settings like saturation, sharpness, portrait, landscape, etc...  When you look at your images using the LCD screen of the camera you watch the embedded JPEG preview, not the raw image data.  The JPEG preview will include all the parameters of the camera, so it will often look substantially different from the raw image.

  In the develop module, go to the calibration section and choose a different camera profile.  If you use a Nikon or Canon camera in particular you will find camera matching profiles that you can pass if you have a raw images.  And you still have to adjust saturation and other sliders to get the desired result.  When you finally set the image to your satisfaction, you have several options.  You can copy these settings to other images.  You can save a preset that includes all of these adjustments.  And if you always pull just portraits with this unit you can save the new default camera settings that include all of these adjustments.

  Working with raw images requires a lot more attention from you, the photographer.  But the results can be much more satisfying.

• G8D90PA: local drive Z makes its appearance continuously

  After that a few updates have been installed in the system, a lot of changes is seen which are as follows:

  1 local disk Z appears continuously, which is noot seen when I open the Disk Manager.

  2. the wifi option is not appearing in my system anywhere

  3. when I start my system after a stop, the numeric keypad is locked and whenever I have to press the number lock using the keys on the numeric keypad after startin my system and I have read about what helped me.

  @sri49
  Welcome to the Forums of HP,
  I hope you're well
  
  If I understand well the local drive Z appeared and that you are unable to remove.
  Don't worry, however, as I have a few steps to remove drive Z,

  Please follow the steps on this YouTube video below (avoid the ads as there is a 3rd party link, I had to go out of my way to bring you this)
  I would be grateful if you can let me know if this worked for you
  
  Response for additional help (if needed).

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• success message (#uSuccessMessage) is no longer makes its appearance after submitting form tab

  I added an interactive report with the search box to my page, decided to remove it and now when I save my tab form the success message is is no longer visible, even if the back-end validation works fine. It will be difficult to reproduce this on apex.oracle, but just curious to know if anyone has any ideas as to why this happens. I tried to Exchange models of pages, but nothing works; my page template still shows all the good div, it must be something with my page itself, like apex doesn't find anything to attach the div of success to? I'm scratching my head.

  Thanks in advance,

  John

  It is possible, that this is something fairly simple in the branch which refers to the calling page.  If you have a branch, on the page that processes the data, and 'include the success of process message' checked.  If you do not have a branch, simply create a.

  Thank you

  -Jorge

• can someone tell me why this makes its appearance?

  I'm not a noob, but no web designer either. I can't understand this problem.

  On this page, www.YPTusa.com/tv.html, for some reason, I have a white strip across the top of my page. By comparison, he does not appear on my index page: www.YPTusa.com.

  I tried everything I know to understand why he is here, including the code (html and css) dissection.

  Anyone would be able to inspect the elements of the two pages to tell me how I can get rid of him? Its really driving me crazy.

  Thank you for all that anyon ecan do.

  J

  Delete this line:

  The white stripe should disappear.

• Why this additional 'toolbar' makes its appearance?

  This screenshot should be clear enough. Since I installed cc2015 I, this supplement "toolbar" appeared. It does nothing more than to get in the way.

  I have manually hide under my palettes whenever I run the program. This extra bar never appeared in the CS6. Does anyone know how get rid of it?

  I can't find anything in the Prefs or view menus and window to deal with it. It is news to me.

  

  You have third-party plug-ins installed?

• Computer crashes when the view is plugged in

  Whenever I plug in my opinion to any computer the computer freezes a few seconds.  This is the version 01.01.06A

  I want to update to the latest version, but I can't do it without connecting to a computer.

  I formatted the drive and restored to factory settings thinking that would help.

  He did something and now I don't have any music on the drive is completely useless to me.

  Help, please!

  Edit:

  This can happen when I have it in the Future Shop and it was connected to the different car stereo USB ports to see how he worked with these stereo channels.  I think I've tried with some turntables, Pioneer, Sony and Panasonic.

  Didn't end up buying one of them however, and I am happy for that now!

  I called Sansa and the guy got me to do a 'soft reset' now the cursor for 15 seconds and then plug it into the USB port on the back of the computer, since it is closer to the motherboard (more power).

  Fixed it!

• Menu Start menu Office made its appearance by taking the arrow of the mouse on the right corner and then click on, but I want to start menu

  In my office start menu makes its appearance using the arrow of the mouse on the right corner and then click on, but I want to start menu tile as the photo above... How to do that in my HP All in one touch pc with windows 8 loads

  * Original title: about start menu

  To get the above method, you must install the Windows 8.1 with the fall update #1.  So, it looks that you just need to open the Windows Update settings and updates.

• A SWF to stop when the canvas is hidden

  Hi - I have a few really really simple viewstack that gives me bad.

  The idea is that a different swf is deposited in each canvas of the viewstack, will be active when the display is active and dismantled when the view becomes hidden. Currently, funds sovereigns loading as planned, but audio continues to play even after the view is hidden.

  Not hideEffect, event mask.

  ...

• How to fill a dynamic array according to the choice of the Viewer

  Hello

  I came across a dead end on my page "events".

  There is a dynamic array, get the information from a database. Initially, it will display upcoming events.

  At this point, my question is this:

  * Can fill the dynamic table based on a condition where the current date and the date of the event (as in the comic book) will be compared and if the date of the event is aware of the date, it will appear in the table. Otherwise, it will not.

  If I can do it, can someone please help me with the code?

  In addition, on the right side of the page there are 3 options for the Viewer:

  1. display upcoming events

  2 discovered past events

  3 search for events by month and year

  What I want to do, is that when the viewer clicks on 'past events', the table will be reset and populated by these events, whose date is exceeded.

  When the viewer clicks on "upcoming events", the table is reset again and filled with the relevant events.

  When the viewer selects a month and a year, the database to find reviews of research.

  Can we write this in php? Since I read smwhere that php does not work with onclick functions... I got confused. Cuz in my table data should vary depending on what the Viewer is clicking (coming events/events/research past events). I do not want to create pages for each type of event.

  If anyone has a better suggestion to complete this task, please share!

  Thank you!

  > Can I complete the dynamic table based on a condition if the current date and the event date (as in the comic book)

  > will be compared and if the event date is later than the current date, it will appear in the table. Otherwise, it will not.

  Of course. Just compare the date field in your database with the current time as returned by the function of date of your DBMS. Assuming you are using MySQL, you would compare your column with the currdate() function and the appropriate use of upper / lower to operators in the WHERE clause. If you don't know what a WHERE clause is then I invite you to learn SQL as soon as possible. You can't build data sites without a basic knowledge of SQL.

  > Since I read smwhere that php does not work with onclick functions...

  This means that php is a server side, where interactions with the user always occur on the client's site. But that doesn't mean that you can't call action from the side event on the client side server. Certainly, you can and would be.

  You should consider adding links to the page of dynamic array passing a querystring to the php script that determine which filter to add in the future WHERE clause to the current date, less, etc..

  Also, in the future, please post those questions on the application development forum.

• How to know when the file attachment appears its visible or hidden

  Hi guys,.

  Sorry for my English.

  In my scenario, I have two button to open or close the display of attachment with the script file 'app.execMenuItem ("ShowHideFileAttachment");'.

  But I don't know when the file attachment appears its visible or hidden or detect when the user clicks the show / hidden in the view.

  Everyone knows?

  Thanks in advance.

  ZAMPAZAMPA.

  You can do the following:

  var obj = this.viewState.toSource().split(",");
  if (obj[1].replace("overViewMode:","") == 7) {
      //Your code here...
  }
  

• I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

  I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

  Try to enlarge the GarageBand window by dragging the corners of resizing.

  If she looks like this, your window is small:

  

  You can also try to click the double arrow at the end of the toolbar to reveal more options.