When the session has become inactive

Similar Questions

• I have a Dell Dimension with external speakers that worked well until about two weeks ago, when the volume has become about 50% of what it was.

  Next week, the volume got lower and lower, until full volume it is than a bare whisper the sounds and audio.  I checked the Dell and Windows settings and tests and they all report the device working properly.  I bought a new set of speaker - same results.  Theere are no settings mute.  I have no volume icon in the taskbar and when I request I get the message that the sysvol.exe file is not available.  Does anyone have an idea for the fix?

  Hello

  · What is the service pack installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  Follow the steps listed in the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

  See also the link that has steps to add the volume icon in the system below bar: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095

• Display users, every day a customer 19:00 error: secure connection timed out (the session has expired, please login again.)

  Hello

  Every day at 19:00 that our employees are disconnected from their virtual desktops, I know that it is because the connection has expired.

  My question is about this delay, the default session out of time (in minutes) is 600. Users log on the connection of the view at 09:00 and they will lunch at 13:30 and return to 15:00.

  600 minutes is the value of minutes between 09:00 and 19:00.

  But time out of session in the VDM global configuration settings is the session limit of when a user opens a session on the server to connect to when the session ends due to INACTIVITY?

  Users are still working at 19:00, so there is no inactivity.

  Why they were disconnected?

  Jorpavon wrote:

  But time out of session in the VDM global configuration settings is the session limit of when a user opens a session on the server to connect to when the session ends due to INACTIVITY?

  No, it isn't. It is the length of the maximum session regardless of the activity, and is necessary to avoid thin clients that never disconnect flooding the broker with the sessions. There is no setting "off". You will simply have to increase it the maximum time that a user will be connected.

• The default value for the elements of the page get ready when the session is disabled

  Hello
  
  I am facing this problem, do not know how to solve this problem. Basically, the default value 'elements' on the page don't prepare you when the session is disabled and I visit the page for the first time. So when I check the session for the first time, all page elements are null. But when I revisit the page, page elements sometimes gets.
  
  Don't know what I'm missing here... Someone has encountered this problem before?
  
  Thanks in advance! Kindly let me know if you need more clarification.

  Is there a way that the page element can be defined at the time the page is loaded for the first time?

  Yes. Create a "Page Rendering" PL/SQL process. That it is very early in the page rendering (i.e. "on charge ‑‑ after Header"). Set the value of the element of page here:

  BEGIN
    :P10_MY_ITEM := 15;
  END;
  

• Hallo why? When I update ios. When the image has finished error itunes and usb

  Hallo why? When I update ios. When the image has finished error itunes and usb

  Connect the iPhone to the computer that you are synchronizing usually with

  and follow the prompts to iTunes on this computer. If you

  do not generally in sync with a computer, you should always use

  iTunes on a computer to complete the update.

• Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizont

  Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizontally, which makes the pages of Mail of Hotmail impossible. I have connected since using the Explorer MSFT and it works very well. This problem occurs only on the page of Mail of Hotmail Live not on the home page or other.
  Could you please let me know if there is a problem with Firefox, or if you have any advice on how to restore the appearance of Hotmail in Firefox?

  This has happened

  Just once or twice

  == I'm compiling an email in Hotmail Live

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom

• Satellite A50-109 shut down when the CPU has to work hard

  My laptop off when I open the www with graphic flash or when the processor has to work hard. What's wrong?

  Hello

  Looks a bit like an overheating problem. What do you think??
  Have you checked the temperature with a tool of freeware as an Everest for example?

  To my knowledge the laptop stops automatically if the temperature rises to a critical level to prevent material damage!

  I think that the cooling modules don t runs properly and therefore the temperature doesn't fall.

  Usually, fans can turn with a maximum yield due to dust and debris inside the laptop.
  From time to time it s advisable to clean the fans with a spray of air compression. It can be everywhere for laptop and computer purchase.

  You should also be able to clear any dust and debris using a normal vacuum.
  Place it on the grids of aspiration air for a few seconds. But be careful.
  A strong suction can damage fans.

  If you have no experience, I recommend to contact a technician and would like to ask for help

  Good luck

• Moto G4 - push notifications to stop functioning when the phone is idle / inactive

  Hello!

  I have a very annoying problem with my G4 bike purchased in the UK.

  Problem:

  My push notification comes to app and gmail to stop working when the phone is idle / inactive.

  When I use any application or when I put just the phone side push notifications work fine. They appear on the lock screen and beep.

  After a few minutes of not using the phone, the message to stop the spread. The sender indicates that a tick and the Moto G4 does not show notifications of type push until the phone is activated and unlocked. It is very annoying, because I already missed several attempts to call. This problem occurs with the Wifi or data plan. It is not a What'sApp of settings as it works very well for a while.

  Text messages and phone calls work well, just a data plan seems to go off when idling and never come back until unlocked (even then it takes a while). WiFi seems somehow to maintain a connection.

  I tried:

  • change What settings the sApp
  • disconnection/connection gmail account
  • remove the operating system of the device cache
  • disable the whats of ap battery saving options and all services appear to be relevant
  • WiFi seems somehow to keep the phone, but only data stops immediately, sending fn when idle
  • Restart in safe mode-> the same problem with meeting places. WiFi seems to work, data plan do not when idling

  Is this a known issue? Everyone knows the problem? To me, it seems that the camera seems to move from the internet and do not reactivate until this that unlocked.

  Any suggestion would be appreciated,

  Thank you!

  It seems to work now after clicking: 'Reset the settings App' in the top menu right in "parameters - apps-> gear-> battery optimization"!

  I haven't seen this solution anywhere else. I did the reset done only because I tried to disable optimization for almost all applications gradually. Without success, I clicked on 'Reset the settings App' and suddenly push notification for all work! Yes!

• which method is called when the screen has lost focus but stays on blackberry?

  Hello

  I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?

  For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?

  Please, help me please please

  Override the following methods in your class to screen according to your needs

  1. when the screen button to the stack

  Call

  onDisplay() or

  onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen

  2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form

  call

  onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns

  3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)

  call

  onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped

  & call

  onObscured() - when your application moves to the background, or when a screen pushed above your current screen more

• An email received, how can I configure my email to receive a notification when the recipient has read the email?

  How can I configure my email to receive a notification when the recipient has read the email?

  Based on your e-mail program, a read receipt can be ignored by the recipient and some servers will block any reception

  Basically there is no process by which a receipt can be confirmed or that the recipient has read the mail - except by asking them directly

• When the Surface has a direct purchase for HBO Go app?

  When the Surface has a direct purchase for HBO Go app?

  Original title: HBO Go

  Hello Susan,

  Thanks for posting your question on the forum of the Microsoft community.

  Unfortunately, HBO Go app is not included as an application that can be purchased directly for Windows Surface and we have all the information when it is included in the Windows store.

  Please let us know if you have any other questions.

  Thank you

• I bought the first CC 2015 when the trial has expired, even adobeCC say this product is expired and won't let me open it, what should I do?

  I bought the first CC 2015 when the trial has expired, even adobeCC say this product is expired and won't let me open it, what should I do?

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• The session has been disconnected

  Hi all

  I'm building one laboratory view 5.2 in my office... Because this is a laboratory environment, I could not use router company (I'm not the router admin), so I put an another Juniper 5GT as audit router...

  then I put 2 servers esxi 5.1 and 5.2 venter/view

  then I clone an ent as view desktop VM win7... then I use my ipad to connect to the server and then connect it this VM Win7... I received a message below

  "Desktop load attention".

  Your desktop is loading too slowly. You may need to activate your VPN to connect.

  Click on 'OK' " "

  then he continues to run... and I also check the Web Client to view events... I see that the user account has log on to view & this VM Win7...

  After customer view fill the bar running, it shows

  
  

  "The Session has been disconnected.

  Lost connection to server. "

  value this juniper IP route default of the machine I need?

  Thank you!!

  wyldkao

  Almost certainly a problem of remote access configuration PCoIP. Just follow the 3 steps here setting up remote access with a view PCoIP 4.6 and newer , and it'll work.

  If you still can not configure it correctly, watch the video that goes through him more in detail.

  Let us know what it was.

  Mark

• Created a form of contact, but when the customer has received potential customer demand, check boxes change to a true or false, there a way to change Yes or no?

  Created a form of contact, but when the customer has received potential customer demand, check boxes change to a true or false, there a way to change Yes or no?

  This is the system default, you can customize either she or you try using forms of third party:

  http://musewidgets.com/collections/all/products/forms-bundle

  Thank you

  Sanjit

• In ADF when the list has changed

  Need help please...

  In ADF when the list has changed I want choose value in the attribute according to changes in the list.

  I would write a ValueChangeListener for the SelectOneChoice. There you can get the selected value and the appropriate value to the 'value' attribute

  It might look like this:

  {} public void valueChangeListener (ValueChangeEvent vcEvent)

  Get the selected value of SelectOneChoice

  String newValue = (String) vcEvent.getNewValue ();

  get the value of the attribute "value" depending on the value selected in SelectOneChoice and set

  ...

  }