Whenever I have the same log file opens in a window of windows Explorer

Similar Questions

• All the program icons have the same appearance and open Windows Media Center

  Original title: cannot start a program
  When I click on an any program icon on the Windows 7 Desktop, a window appears with its contents: suggested program to open Windows Media Center. All the programs on the desktop icons have the same appearance.

  Using Word 2007 to get an example:

  I've seen this happen when opening a program via a shortcut on the desktop (for example. LNK file), you are asked what type of program to open it with. After you select theWord (or another program) via the Select a program from a list of programs installedand checkalways use the selected program to open this type of file, the referenced by the shortcut of origin Word document opens in Word as it should.

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the Explorer will want to be opened by Word and use Word icon to display the shortcut. This is known as a file association and the default icon. The same condition can occur if you have performed these actions on one. JPG or even a. EXE, but the. LNK explanation is much more likely.

  This has happened enough that a small utility was written to cancel the. LNK file association was created. There is a registry hack to do this, but I recommend the utility unLNK for its ease of use.

  A utility to Unassociate Types of files in Windows 7 and Vista
  http://www.Winhelponline.com/articles/231/1/an-utility-to-unassociate-file-types-in-Windows-7-and-Vista.html

  Just use the utility to unassociate the. LNK files. Operating instructions are available on the web page above (the same place to get the utility).

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• My Indesign crashes whenever I try to access 'file' in the menu bar. I got tired of rebooting and several different files. Crashed whenever I have the mouse on "file."

  Any help would be greatly appreciated!

  Version ID? OPERATING SYSTEM? It has never worked?

  Have you tried trashing the prefs? See replace your preferences

• Is it possible to display two tabs at the same time without opening a new window?

  I would like to see a tab, while I am working in another. I can do that by opening one of the tabs in a new window and both windows on the screen of tiles. Is it possible to do so in a window?

  Just installed Split Panel and it seems to do exactly what I want.

  Thank you

• It cannot open any programs they all have the same icon on the desktop and start programs... why?

  All of the icons on the desktop and on the start menu have the same icon and will not open... I have new sony computer with windows 7... I tried to move music to a file to burn a cd, he asked what program I should use to open them have all records have the same program and open the habit... I don't run a virus, malware, none of the infected files.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you try the steps from the following link:

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2
  The issue could be due to the virus on the computer. I suggest you run virus scanner online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• Attach a database without the corrupt log file

  Hello

  IM asking if it is possible that to fix one. MDF datafile without the. DFL

  I want that because I have a corrupt log file nd when I attach the database triggers the following error: -.

  -----------

  The log cannot be rebuilt because there were open transactions / users when the database has been arrested, no checkpoint occurred to the database, or the database was read-only. This error can occur if the transaction log file has been manually deleted or lost due to a hardware failure or the environment.

  --------------------

  I just need the data of this file that I need and I don't have the damaged log file

  I tried

  sp_attach_single_file_db "new_2009", "C:\Data\new_2009_Data.MDF".

  but the same error comes back.

  Note Please that I have no recent backup suggest to restore the database from backup

  Thank you

  One of the commands and restore types should help you, good luck...

  Restore the full backup WITH RECOVERY

  Note: as mentioned above this option is the default, but you can specify as follows.

  Command:

  RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorks.BAK '.

  WITH RECOVERY

  GO

  Recover a database that is in the State of 'restore '.

  Note: The following command will take a database that is in the State of 'restoration' and make it available to end users.

  Command:

  RESTORE DATABASE AdventureWorks WITH RECOVERY

  GO

  Restore multiple backups using WITH RECOVERY for the last backup

  Note: The first restoration uses the NORECOVERY option restores additional is possible.  The second command restores the transaction log and then brings the database online for the use of the end user.

  Command:

  RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorks.BAK '.

  WITH NORECOVERY

  GO

  RESTORE LOG AdventureWorks FROM DISK = 'C:\AdventureWorks.TRN. '

  WITH RECOVERY

  GO

  More information that you can dig up resources directly connected with SQL Server databases and the MS SQL Server database no matter what version...

  http://www.SQLServerCentral.com/forums/Topic1602448-266-1.aspx

  http://www.filerepairforum.com/Forum/Microsoft/Microsoft-AA/SQL-Server/1413-SQL-database-in-suspect-mode

  https://www.repairtoolbox.com/sqlserverrepair.html SQL Server repair Toolbox

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have can´t of the cbs.log file

  Hello world

  It seems that never ends, now it s the file cbs.log that says access denied.

  OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

  Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

  So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

  Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

  I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

  Pleeaase helps.

  Well be Pedro Borba

  Pedro Borba,
  You must copy the CBS and paste it on your desktop or Documents folder.  Then, open the copied version of the file.  Here is an article which also gives instructions on reading and research the CBS log file.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

  Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

  Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

  Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

• You can open the same indesign file on mac and PC?

  Watch creative installation cloud on a mac and PC (at work) but need to read old and new indesign files created. Thank you

  1. The INDD format back on Mac and Windows.
  2. If you have the same version or a version more recent that the file was created with you can open it without problem.
  3. If you want to open a file in an earlier version, you should ask an IDML file from the initiator. But expect undesirable changes in the file.
  4. Inside the creative cloud you can open cs6 up any latest file if you have an internet connection, but expect changes too.
  5. Problems between Mac and Windows are often policies. The Mac can read only fonts Windows, but Windows can not read only Mac fonts. If you are using OTF fonts only you have no problem.
  6. New OS have problems with T1 (Postscript fonts), my recommendation is to avoid.
  7. Using PSE often of problems appear, specific with the new operating system and postscript fonts are embedded in the EPS, do not use it, use PDF/X-4.

• GlassFish > view log file opens in the editor instead of the console

  How to reproduce:

  1. Open the view servers and make up the context menu for a GlassFish Server
  2. Select GlassFish > view log file

  Real: The log file is open in an editor. Whenever the file is changed, a popup appears asking if the content needs to be recharged (unusable)

  Expected: Log file opens in the console and provides the usual and reloading or scrolling behavior

  Eclipse: 4.3.0 (Kepler) (Platform 4.3.0.I20130605 - 2000)

  GlassFish tools: 6.0.3.201306271729

  The question is: this bug can it please be corrected?

  Hello

  Please update to the latest version of EPCO 12.1.2.0.0. This question has been address in this version.

  http://www.Oracle.com/technetwork/developer-tools/Eclipse/downloads/index.html

  Thank you

  REDA

• Windows 7-How to disable the Preview on my desktop icon, I have many files on my desktop, it's easier when all of the PDF files have the same icon instead of a preview icon.

  How can I disable the Preview on my desktop icon, I have many files on my desktop, it's easier when all of the PDF files have the same icon instead of a preview icon. so, I immediately see who is PDF and DWG. at the moment they all look different because the icon shows a preview of the contents of the file.

  Hi Khody,

   

  To change your windows 7 application icon you can use following the procedure-
  a. Right click on the desktop icon and then click Properties.
  b. now Select the shortcut tab and see button below to change the icon. Click the button change icon now all the icons.
  c. you can choose a of the icons that you want for the shortcut.

   

  I hope this helps.

• I think it would be helpful if when you open the drop-down list for a 3D object keyframe controls have the same color as the 3D arrows in the project window.

  I think it would be helpful if when you open the drop-down list for a 3D object keyframe controls have the same color as the 3D arrows in the project window.

  You can suggest that here:

  Feature request/Bug Report Form

• Consultation problem Mac Photoshop Elements 11. Unable to open the program. He tells me that it is damaged. To remove the program and reinstall it from the app store. Again, I have install my purchases in the app store, and yet, I have the same problem. T

  Consultation problem Mac Photoshop Elements 11. Unable to open the program. He tells me that it is damaged. To remove the program and reinstall it from the app store. Again, I have install my purchases in the app store, and yet, I have the same problem. Thank you.

  I just wanted to make account - it seems that the problem has been resolved. After another remove & reinstall it is operational!

• Users can have the same PSD open simultaneously?

  All started to share a new server in the office. Two of us opens the SAME photoshop file at the SAME time. Together made us changes, we saved two.

  Photoshop gave the zero WARNINGS to one of us. Is this normal?

  How do you know if someone has an open file? How do you know it's even safe to work on a file?

  Little freaked out here... I don't know that I'm missing something simple and obvious, right?

  We use CC 2014.

  Thanks in advance for any help or advice!

  Hi CCisaripoff

  Yes, it is actually normal.

  What it is recommended that when you access a file from a shared server - create a copy of the said, and then make the changes.

  That the PS has created a working copy which locks the file in the local computer and not on the server.

  ~ Jitendra