Where is the source of AIHostAdapter.aip?

Similar Questions

• where is the source code of the page

  Where: view the source code

  command U

• Where is the source for the GPL had NDK tools?

  Since the NDK (specifically, I use the 2.0.1 NDK PlayBook) includes tools (gcc, gdb, binutils etc) GPL3, RIM needs to also make the source code used to compile these tools available. Specifically, I am interested in gdb, as the "vanilla" version of the FSF does not support ARM QNX Neutrino (it has support of QNX Neutrino i386, however). The version distributed with the NDK reports himself as ' GNU gdb (GDB) 7.3 qnx (Rev.). 613)", so I assume that it was compiled from sources patches.

  RIM's commitment to open source, I am sure that just an oversight.

  Where you are looking for?

  It seems that QNX makes available through Foundry27:

  http://community.QNX.com

  Rest SVN:

  http://community.QNX.com/SF/SCM/do/listRepositories/projects.toolchain/SCM

  'core-dev-tools' SVN repo (username: guest, no pass):
  http://community.QNX.com/integration/ViewVC/ViewVC.CGI/tools/?root=core-dev-tools&system=exsy1001

  Includes:

  • binutils /.
  • GCC /.
  • gdb. /
  • do. /
  • NASM /.

• Where is the source code for the samples of 8 JavaFX?

  Hello
  
  I just downloaded the samples for JavaFX 8 and the popup menu in the upper left really caught my attention.
  
  I want to study the source code for it. Anyone know where I can find it?
  
  I expected it here http://hg.openjdk.java.net/openjfx/8/master/rt/file but it seems it isn't here.
  
  Alternative: Jasper Potts presented a kiosk application to Devoxx 2012 (Antwerp), which was also used at JavaOne. I think that this application uses the same Menu. And he says that sources are available. But I do not remember the link.

  https://jdk8.Java.NET/Download.html

• Where is the source of 'trust' for 12 FrameMaker?

  When I run a script from the command line, I get the "you are about to run a script in Adobe FrameMaker 12. You only need to run a script from a reliable source. "Etc. The ExtendScript Toolkit docs say "the folder of the user-script installed Adobe applications. No idea where it would be for 12 FrameMaker? Thank you.

  -Rick

  Not tested, but the Javascript Tools Guide p.18 has this to say:

  Adobe Scripts folder

  The first launch, the tool creates a folder named Adobe Scripts in the user Documents folder. The

  Preferred default in the Scripts panel displays the contents of this folder.

  By double-clicking a JSX file, the Toolbox normally acts as an invisible security filter. Before actually

  launch the file, a security dialog box asking if it's OK to run the script. The Toolbox discusses the user

  Folder Documents/Adobe Scripts , however, as a location approved; When you double-click a JSX file to this

  file, the Toolbox does not display the security alert.

  In WIndows, it is "%userprofile%\Documents\Adobe Scripts".

• Where are the Source FrameMaker files

  I am an experienced user of FrameMaker, but have never used RoboHelp. I am to evaluate the Suite of Comm Tech for a customer. I got using the Guide of the evaluator to import FrameMaker files and deploy a support system. Then, I created my own project and followed the instructions in the blog of Adobe to import FrameMaker files. Now, I'm trying to follow the instructions in "Updating FrameMaker linked files" Adobe blog, which explains how to upgrade the style mappings. However, I cannot find or do not recognize the FrameMaker files that I imported into RoboHelp.
  
  Help?
  
  Thank you
  Carol

  Ok. So I had not imported anything but the .book file. Off the hook on...

• Where is View Source? How can we consider the source code of a Web site?

  Where is View Source? How can we consider the source code of a Web site?

  View the Source used to access via a drop down menu, but is no longer. Why?

  I use Firefox 24.0.

  1.) get in Firefox.
  2.) open any page you want to view the source code.
  3.) after full opening of the page "right-click" then you can see the source view of the page, click on it to see the Source of the page.
  Thank you.

• Where is the installer for the Source column of the command in other tab of orders?

  Hello!

  I would like to ask where to find the installer for the Source column of the command in other tab of orders. I saw internal and online, I think it's always external.

  Thank you.

  Jon

  Order header Source is the origin of the order-using the OM Super user responsibility, see Setup-> controls-> import Sources.  I think that external is a Source Type on the command line that indicates if the line item will be provided by your org or bought.

• where can I get the source code for the shell of the user interface

  Hi all
  I use Jdeveloper 11.1.2.3.0 shell and UI.
  I want to show a custom message to the user when it tries to close a tab that contains unsaved data.
  I found this thread {message identifier: = 10782288}
  I tried to extract the contents of the oracle-page-templates file - ext.jar, but I find only the .class files not .java files.
  So, where can I get the source code for the shell of the user interface, or someone has a better solution?

  Hello

  Try this link http://www.oracle.com/technetwork/developer-tools/adf/uishellsrc-1612278.zip

  Frank

• where can I find the source files for vmxnet3

  Hello

  I just installed vmWare tools and having one of my (i.e. vmxnet3) adapters come with her.

  However, I am not able to get the files source for thje pilot in order to edit and compile my own. The only source files I see is

  VMware-Tools-distrib/lib/include/VMCI/vmci_sockets.h
  /VMware-tools-distrib/lib/GuestSDK/vmSessionId.h
  /VMware-tools-distrib/lib/GuestSDK/includeCheck.h
  /VMware-tools-distrib/lib/GuestSDK/vm_basic_types.h
  /VMware-tools-distrib/lib/GuestSDK/vmGuestLib.h

  My kernel version is 2.6.18 - 164.el5

  Could someone tell me where I can get the source files.

  Thank you!

  You can take a look here http://downloads.vmware.com/d/info/datacenter_downloads/vmware_vsphere_hypervisor_esxi/4_0#open_source

• Where are the tabs Source/output in export settings

  I CS5.5 Production Premium with SOUL 5.5.1.12 loaded on my Windows 7 PC.

  I want to crop a 16:9 4:3 video.

  The Source Panel and output do not appear on the export settings window.

  I feel stupid, but where's the crop tool?

  

  If you open a standby file export settings, you will not see the tabs Source and output. The controls on these tabs require referencing the source element, which is not possible for the records of the watch.

  If you want a spyware file to include cropping (not a good idea because the result will vary for each clip processed) you can create a preset. Add a source element to the queue, change the settings as you wish and save it as a preset. Then assign it in the watch folder.

• No way to know where something came in the source video?

  Using Premiere Pro CS4, Version 4.2.1 on an i7 PC based.

  I would like to know where a clip on the timeline came within the element in the source monitor. Where there is information about the clip on the timeline, it seems that tell me it is 'Start', 'End' and 'Duration' in regard to the sequence in progress, but nothing about the 'ins' or 'Out' points in the source element.

  Is it possible to read this somewhere, rather than having to replay the clip in the source monitor Panel to discover the points of entry and? It tends to be tedious to do that too often.

  Thanks in advance, I hope so.

  Peter.

  DBLE clicking on the item in the timeline to reveal directly when it is in the Source monitor could save you some time.

• Where can I find the source of the usefulness of the dynamic "LOVs? white paper

  I downloaded this white paper: -.
  
  http://www.Oracle.com/technology/products/forms/PDF/10G/community_paper_generic_lov.PDF
  
  and its title is:
  Form of Oracle 10 g - dynamic LOVs
  
  The problem here is that I can not find the AC power : -.
  
  • THE COLORS. PLL
  • LOV. PLL
  • GEN_LOV. FMB
  • INIT_LOV. FMB
  • TEST_LOV. FMB
  
  does anyone have an idea where I can find the Source?
  
  Please I want to link specific, as it does not exist in the white paper: -.
  {Sources of the utility can be downloaded from the Oracle Technology Network (OTN1).}

  Hello

  On the same page, the title is followed by a link called: zip
  (http://www.oracle.com/technology/products/forms/pdf/10g/community_paper_genlov.zip)
  Just click this link ;-)

  François

• where can I see the source of the data model?

  Sorry, very basic question... When I create table ADF business components, he created display objects and data controls. Then I drag a data control to create a table of the ADF in the properties of the Table, I can see ELs something like that for different areas. #{bindings. MyTableView.collectionModel}
  
  Where can I see the source code for these models such as collectionModel, pivotTableModel etc... ?
  
  In addition, the source code is available for example from the file Explorer in the rich client demo? A tutorial step by step for something like the file Explorer?
  
  Also, if I want to connect to a web service and get data to display on the screen, what is process that I have to take? To create entity objects, he always invites for a database connection. Should I create a simple java class that implements a data model to connect to the web service and then create objects to display on the screen? Then I'm confused what is the purpose of all controls data (data controls are created when I create a view object)?

  A quick response from web services - you can create a web service proxy and then drag that the data control palette or right click CREATE a CONTROL DATA - then creates the "public" interface to the web service through the data control palette.

  Concerning
  Grant

• Where can I see the source code for the controller

  Hi all
  
  My question is maybe stupid to some gurus of the ADF, but many people have found that R12 Pages have a lot of code and there is not too much documentation on how to customize a controller.
  
  1. I see the *.class of my controller in the $JAVA_TOP/oracle/apps/ar/cusstd/createcus/webui/ArCreCusCO.class on my server, BUT I don't see that any of the encrypted code when I open up JDeveloper. So I guess I'm doing it wrong.
  
  2. I want to change ArCreCusCO.class. I see a lot of people say Hey I've customized XYZ controller, but how they found the code and continue to change it is the least of my headaches
  
  3. do I need to configure something in JDeveloper so I can see Server classes to my JDeveloper - what they do, if so, how you do?
  
  4. I saw something in the help page saying adding components to the Extension of the OA the devil what?
  
  Thanks to illuminate some beginners in the ADF.
  
  With the new philosophy of Java, some of those 12 developers experience that we are not starting from zero because of this new architecture.
  
  Hector. -.
  
  p.s. any entry will be taken, but do not refer to the Oracle tutorial, is an example of cake I need some practical examples ;-)

  Hi hbono99

  (1.) you can .class c above java, which is the compiled code as source code is not provided by oracle, if you need this file '.class' to see the source code for decompile, JAD decompiler 1.5.8 version will be newer .well, it would be useful to see the source code, but sometimes decompiled class create problems when trying to compile again.

  2.), you can make changes in the ArCreCusCO.class after that decompilation and compile the same thing again to generate the class file, bcz you can put only class file on the server, BUT that would be fatal to change the standard class and the concept here to come of the Extension in the image, you need to extend this class. «XYZ custom "means the extesión of the class parent and make the extension u don't need not the source.»

  3.) u cannot see the source code of a .class in Jdeveloper, there is no such a parameter.

  (4.) to extend the need to ArCreCusCO.class you to create a workspace followed by creating a project in the workspace Jdeveloper
  process to extend the class

  a.) create workspace and project
  (b) create the same package in which resides the ArCreCusCO.class under the \jdev\myprojects\ in your Jdeveloper
  (c.) right click on the project, go to create the new class, here you will find the option to metion the package where you want to put the superior (normal package starts with a xx.oracle.-) the possibility of mentioning the nmae classs that you want to extend
  (d.) click ok at the end, you will get your extended class

  e.) source code usually has two methods ProcessFormRequest and processRequest, you can add the code according to the requirement.

  extension works bcz inside the method she calls super, so all first it runs all the methods of the parent class in your case ArCreCusCO.class and then control comes in extended class, now, your code will be run, which will be accomliseh your condition

  f.) tranaser the class file file expanded to the server, add this extended class with seeded page you need to customize the page, you will find the option to add your class, mention u your class with package to compete (the way that we import the file with their package names in our source code, here import is not necessary)

  thanx

  Pratap