White print pages only printer

Similar Questions

• my hp desk jet f2480 will copy but will not print blank pages only

  my hp desk jet f2480 will copy but will not print blank pages only

  Hello chevy-123

  Please try the following article, he can help solve your problem.

  Printing blank Pages

• Color Laserjet 2840: White Pages only

  Hello!

  2840 ceased print after changing the black cartridge. He just printed white clean pages. Copy or printing did the same. Scan worked, the machine responded and moved and it was available in the internal network. But he appeard as the UN 2830 type. I checked the web, read on the card reader cable looselyness, opened the machine and fixed it firmly. Over time, he returned to 2840 to the different machines. Perhaps, he moved with all the reportoire. But do not print.

  First of all I thought to a problem with the drivers. Tried to start/stop, restart until the firmware to factory status. Nothing has changed. Downloaded updates, I found on the web and installed (USB). Same thing.

  The second I suspectec on the cartridge, the black one (the only one I've been using and replacing for the past two years). The date in the box was 2014, but I guess it is the date of manufacture as the last one, I used said 2012 and worked until last week. I ordered another news that came yesterday morning, but nothing has changed. (He went to $ 100).

  On the way, I consulted technicians the on the phone who told me to think about the drivers. Which I had already checked. End of this road.

  So, third, I read for one, and I found the problem associated with only yellow/white pages and dirty sticky solenoid. I had a couple of coffees... and opened and closed the machine according to the maintenance manual. Just two screws on the left, all works with the mechanics and four hours of work. Nevertheless, almost finished... the cartridges could not be loaded as carousel slots went to place. (This has happened since the fourth grade, from 2007, but simply by pressing the button, finally, they went to the place, or the carousel was loose enough to put them in place with a smooth finger pressure). I could get to three cartridges in place, but could not with subsequently. This time, has no looselyness in the carousel. Again, found the clip on this forum thing and put it manually. Finished,

  In the end, I'm back to the starting point: everything seems to work... but... only clean blank pages come out of the machine.

  With this information, can give me some clues to start before I guess I have a heavy left sweep and $ 200 in ink unusable?

  (I don't have a technical repair close to carry my machine and a month unless it would mean I have to buy a new one...).

  Thanks in advance. Sorry for my English.

  Hello! I DID IT! The machine is repaired. He even printed in color with empty for two years color cartridges! So I'll spend a few minutes to explain where that has happened just anyone can use. The problem was a misallingment of the caousel gears. Two of them.

  http://www.teclar.EU/teclar.EU/alinhacion_esquerda_previa.jpg
  http://www.teclar.EU/teclar.EU/alinhacion_dereita_previa.jpg

  As I couldn't find a way to continue with the laser/scaner device index, which I opened it to see what it looked like http://www.teclar.eu/teclar.eu/laser_scanner_assembly_inside.JPG

  following a hunch, I decided to try one last thing: re-align the gears of the carousel.

  Once more, I took the manual, find the chapter and followed the steps. Everything I had done before took a third of the time, but the wind, unrouting cables, and especially the top plate made last even 3-4 hours (you never know if you want to break something). But the manual is very specific and if you are methodical organized and retain or photograph what you did anyone can take this machine apart to pieces and come up again. So I didn't.

  But after you gain confidence I tried to put an end to the process earlier that I must made a mistake. When I had not yet placed the Assembly sweeping, nor any of the covers, I tried to test the machine.

  Well, what followed were error59 and error57. Furthermore, as I have tried to set up the cartridges and imaging drum, I broke the imaging drum (if the right and left covers are not in place a lever in the imaging drum does not engage and you can not put it inside the openings if you try harder, you brake a nipple on the left side of the drum plastic; Eh_bien I pasted it yesterdey and today I will test if it goes...).

  Affotunately, like Diogenes, I do not throw anything until he spent a period of five years quarantined (modern times) so I got an old Imaging drum which also let me know that I have broken in the most recent, could be put in place and proceed with the repair (even if it had been stored for more than two years He came back with a left of 5% of the work to be done...). So, what now? Back to the beginning and clunch and click all. Another two hours (now I reassembled everything, including the recent covers) tried a test engine: and worked! Even with colors contained in cartridges that did not spit out a single ink for two years! It's funny.

  The specific repair was the misallingment. As you could see in the before pictures.

  This was the position final alligment of the http://www.teclar.eu/teclar.eu/alinhacion_dereita_nova.JPG of speeds http://www.teclar.eu/teclar.eu/alinhacion_esquerda_nova.JPG

  The point is that the way to align the large black gear with the small white gears is simple to shoot blacks out of their place, enough to run the as needed. By simple application of force. (Protect your fingers or you might get a slight cut). So, I'm wondering if I should have followed the procedure recommended by YouTube that does exactly the same thing without removing anything. https://www.YouTube.com/watch?v=xKwsYipQ0Ag The train left is perhaps not so easy to get around... but... because a lot of things you can break following standard procedure... I think about it.

  One last thing. I didn't have a magnetic head screwdriver and I don't fix everyday machines so I made this http://www.teclar.eu/teclar.eu/aparafusadores.JPG which worked perfectly. Without a magnetic tip, no one can do that. Just to finish a few pictures of the parts and the machine http://www.teclar.eu/teclar.eu/solenoide.JPG http://www.teclar.eu/teclar.eu/pezas.JPG http://www.teclar.eu/teclar.eu/maquina_toda_desmontada.JPG

  And thank you very much to all those who participated in the design of this machine. It's really rewarding to see how things are going without effort and can be dismantled and reassembled easily. I work in the construction sector, where almost everything must be broken to open it. Thanks again and God luck with your DIY repairs.

• HP Officejet Pro 6830: Black and white printing

  Hello, I hope someone can help me because this problem is driving me crazy.

  When I try to print something on the I do not have the option to print the selected page black & white print.  BUT on the computer of my wife which is also a Macbook is the box for black & white printing.  How can it be possible?  We both use the same driver, and we both use the AirPrint printer.   Please help me. Thank you

  Hello

  There might be a difference of versions and therefore a "Preset" I don't not offered.

  You can change the settings for B & W pritn as follows:

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized: click Show details to display all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset.

  Shlomi

• Black and white printing with hp deskjet 3000

  I downloaded the latest driver for Mac OS X 10.5 and option for printing in black and white.  The appropriate driver is selected in system preferences.  Where can one find a black and white print?

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print.
  The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to the product model to see all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Paper Type/quality in the menu dropdown.

  4. click on the triangle in eye Color Options of spending parameters.

  5. set the color to Grayscalefield.

  6. you can adjust the Grayscale mode black ink cartridge only , do not use any color for printing in grayscale...

  You can save the settings for later use by clicking preset > save current settings as preset.

  Kind regards

  Shlomi

• black and white printing on HP Officejet 6700

  I have an IMAC 10.8.1 operating system.  I can't get my 6700 HP to print only black and white.  Even when I choose black and white printing, it will not be printed like that.  I can't implement any new printing preferences.  Now, I'm unable to print anything and yellow ink.  Went and bought a new black ink and printer recognizes that black ink is full.

  I don't know just something I am doing wrong.  Can anyone help?

  
  The application that you are trying to print from, launch the print dialog box (file > print).

• black and white printing

  Hej
  I have the MacBook Pro and HP Photosmart Premium printer and I have a serious problem to find the settings for black and white printing (no colors). I think I've checked everything. I would really appreciaty advice to solve this problem.

  Hi @Zuska,

  Thank you for visiting the Forums from the HP Support! I see that you want to print in black ink only on your printer HP Photosmart Premium with your MacBook Pro. Please follow the steps listed below:

  Printing with the Black Print Cartridge-only option

  1. Click file and then click print.

• Why my PRO - 100 black-and-white prints have a color tint?

  I print out on the printer PIXMA Pro-100 and sometimes, for no apparent reason (?), my black and white prints have a color tint (generally a "reddish brown"), then when printing to new... same settings print, same... the same impression will be fine, neutral with no tint at all.

  No idea why?

  Also (perhaps related?) I do not understand why Photo-Cyan and Magenta cartridges are exhausted when I'm NOT print color, but only black and white.  Am I missing something?  When you set up for printing, I always make sure that the 'Black and white photography' feature is selected in settings dialog "Quick Installation".  This ensures not only the black and gray inks are used as long as I'm not "toning"?  In other words... ONLY black and gray inks are used, if not the impression that is supposed to be a black and white printing neutral? Yet once... I missed something?

  FOR INFO:

  I print on Canon Pro radiance papers and more glossy.

  Under 'Options - color management', I selected:

  (color management) Photoshop Elements handles colors

  (image area) Adobe RGB (1998)

  (the printer profile) Canon PRO-100 1/2 Luster Photo Paper Pro

  (rendering mode) Perceptual

  The most important thing is the paper you choose to print on.  Find this first release. Any Epson printer which uses UltraChrome K3 inks will do a better job with B & W as a Pro-(anything).  But Epson suffers from obstruction more far do, Canon Pro-100 problems.

  If you print a lot is not too big of a problem, but if you print once a week or once a month to forget it.  Go with Canon that clogged very rarely, if ever.

  Try to find the right paper.  It will make everything better.  Call the Red River or Canson and ask them to recommend a book.  Red River will work with you and they know the Pro - 100 inside and outside.

• HP Photosmart 7510 black and white printing

  How can I change the color to black and white printing?

  Hello Fludium

  According to your printer software, there are two different methods to set the levels of gray and black ink only.

  1. Inside Printer preferences, you switch to the features tab. Here, you should see grayscale in the lower left corner. When grayscale is selected, you can use black ink only quality. Then press ok.
  2. In the printer preferences, you can click the Advanced button. You should see a "print in grayscale" option is set to 'Off', put in levels of gray or black ink only and press ok.

  Like with a Mac when you open the print dialog box depending on the application, there may be a link at the bottom left of the dialog print system. Here, you should see a predefined option. There is a quick project to black ink only preset. Save this preset and it should become the default option.

• Can someone tell me how to make my brush confetti white print on the color paper and have no bottom?

  Can someone tell me how to make my brush confetti white print on the color paper and have no bottom?

  Your printer there really white? (This is not a common feature.)

• How do I display the footer message in the second Page only

  Hi all

  I was working on BI Publisher 10 g,

  I have a report called invoice printing, then now if I ran the unique billing report, I have two pages of output but the address in the page footer appears in two pages, it is possible to print the address on the last page only. That is to say when the Bill is on the need to print address.

  Concerning

  Srikkanth.M

  Thank you for using your content of the specific page for the last page footer

• Firefox does not open with the tabs I had open when I use the renunciation and backup function. Firefox opens on my home page only. How to fix?

  When I use the function "Save and exit" has no effect. The next time I open Firefox it goes to my home page only.

  This has happened

  Each time Firefox opened

  Is 3 days ago

  If you use delete navigation, search and download history on Firefox in Firefox 3.5/6, or clear private data in Firefox 3 to clear the browsing history when Firefox is closed then in restaurant tabs at the last session (for example "save and exit" or "show my windows and tabs from last time ') does not work.

• Header/footer for the first page only

  Hi all

  Is it possible to have headers/footers with option, first page only? The current options are

  • Not first
  • Only in the last
  • Not last
  • Back only
  • In front only

  Is it possible to have 'first only?

  We use Documaker Studio 12.3. Thank you.

  I think that if you want a header, footer on the first page only, which means that you should not use the copy on overflow attribute. Then those who would only be on this first page.

• How can I cancel my account when the need help page only allows me to go to forums and does no real contact for adobe?

  How can I cancel my account when the need help page only allows me to go to forums and does no real contact for adobe? How can I contact Adobe actually?

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Concerning

  Stéphane

• I have my site almost ready to the master page, but when I drag to copy on the home page or any other page - only 15% of the master page is copied. Why is it happening? Could you please help me?

  I have my site almost ready to the master page, but when I drag to copy on the home page or any other page - only 15% of the master page is copied. Why is it happening? Could you please help me?

  Bernard, I very much appreciate your support & help...

  Neha, Adobe erased my problem... it's guide to footer...