Why 8 Captivate is always crashing on Windows?

Similar Questions

• CC of Photoshop updater always crashes on WIndows 7, saying "finished".... ».

  CC of Photoshop updater always crashes on Windows 7, saying "finished".... ». Does not help restart. Whatever the initial cause of this condition, is it possible to reset the State of the installer, so that it can try again from the beginning?

  As suggested, I've resorted to uninstall/reinstall Photoshop CC (2014) to solve the problem. It seems a bit of a sledge hammer approach, but it did not take too long.

  As for the original cause of the problem, it may be associated with the fact that I also have Photoshop elements 11 is installed. I was able to recreate a similar problem when you try to update bridge CC. During installation, the update has complained that "ElementsAutoAnalyzer" was in running and (once this had been arrested) the update was not recovered successfully. I think it's the same thing during the update of Photoshop CC. Strange that I've never had this problem before, though - it's just the latest update which caused the problem.

• Hello, as I did an upgrade from Windows 7 to Windows 10. I also upgaded to Lightroom 6.2.1. Now it always crashes when I did crop, straighten up or deleting photos. I always have to restart lightroom after that. It then sends a message to wind

  Hello, as I did an upgrade from Windows 7 to Windows 10. I also upgaded to Lightroom 6.2.1. Now it always crashes when I did crop, straighten up or deleting photos. I always have to restart lightroom after that. It then sends a message to Windows. But gave any help. I had him just ended a cht with Adobe on this matter, they gave me your forum. Can someone help me, please? Ivo

  First of all, try to disable the GPU: https://helpx.adobe.com/lightroom/kb/lightroom-gpu-faq.html

  What type of GPU do you use?

• Why Premiere Pro CC 2015 crash when you work with still images?

  I am in the phase of learning with first (edited on Sony Vegas for years) and I'm working on a test/learning the project using a mix of videos and photos of my family trips.

  Working with the video looks very good (although the thumbnails take forever to load for the still and video images and need to refresh every time that I re - open a bin). When I work with stills (jpgs in this case), PP CC 2015 crashes at various points. He fell down on a double click to add to the drafting of a subitem, when deleting a still in the chronology of the sequence, a trip as always on the scenario, when you open the tab effects, etc.

  I haven't done this experiment with video.

  Don't laugh, but I was hoping that my laptop Dell XPS (Core i7 4500U, Intel HD Graphics 4400, 8 GB of RAM) would have enough power to use first (a part of why I subscribed). I'm on Windows 10 and keeping the files I work with on my local hard disk solid state. I tried to solve the problem by updating and also reduce the graphics driver, but I'm not as much of a techie like many of you.

  Here is the log of the events since the last crash:

  Name of the failing application: Adobe first Pro.exe, version: 9.1.0.174, time stamp: 0x564dce25

  The failed module name: igdrcl64.dll, version: 10.18.15.4256, time stamp: 0x55a99b59

  Exception code: 0xc0000005

  Thanks in advance for any help...

  Jeff

  Hi Jeff,

  The photos you are editing are really big? How many RAM GPU you have? I assume you are using GPU acceleration (found in the project settings); If you do software only made you still a fall?

  Thank you

  Colin

  First Pro EQ

• Why the reader most recent Flash for Windows so plant them?

  Why the reader most recent Flash for Windows so plant them?

  I use the latest update of Flash player that has developed on this computer.  It's Flash player version 11.1.102.62 on a Windows 7 computer.  I have experienced excessive crashes Flash player in Firefox and Internet Explorer.  Since the two latest updates of Flash player who, it seems to come from Adobe it is a big problem with Flash player crashes.

  Previously, there was no problem... then there was the update yesterday and problems began.  I was hoping the last update would have fixed this problem, but now it's worse.

  Is it possible to return three updates and install older Flash Player?

  Adobe will never get this fixed number?

  Thank you

  Digi

  reproduce crashers regularly contributes to refine specific problems.  the random thugs are difficult to follow and difficult otherwise.

  the latest version of Flash Player, 11,2,202,228, were announced last week.  It would make 11,1,102,62 version two behind.  Would you mind upgrade to the latest version of the player?  There are a few crash fixes in our last offer.  You can go here to update: http://get.adobe.com/flashplayer/

  It is possible to downgrade, but it is not desirable that the old version will be always up-to-date with patches secuirity.  If you option for this, you can retrieve older versions here: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html#main_Archived_v ersions

  Note: Make sure you completely uninstall the existing version.

  Thank you...

• Why I can not install SP1 in Windows XP version 5.1?

  My Dell C840 Hardrive Laptop just died including the battery. I replaced them both. I put a larger HD-130 GB. I reinstalled the original version of Windows XP 5.1

  After installation I downloaded Service Pack 2 and Service Pack 3. None of them move. Microsoft Helps - gave me a link to download the Service Pack 1a. I downloaded it, but in the midst of unpacking and installation, it stops and says the communication server with unresponsive. I still click on re - try and nothing happens. After several re - try with the same result, I get a dialog box with this message: ' the following error is produced so that the service pack 1 Setup attempted to download files of Service Pack 1 of the internet. " The server did not respond. If the error persists after that you clicked several times, go to the Windows XP Service Pack site and select "problems downloading the Service Pack" that will give you instructions on how to download a version of the Service Pack does not require an Internet connection during installation. " Found no solution on"download service pack issues. "

  Because this Windows XP 5.1 worm has Internet Explorer 6 - Microsoft sites have errors on the page and IE always crashes. I tried to switch to IE 8, but it will not install and still the "Entry Point not found" error

  When I click on "windows update". It brings me to this link: support.microsoft.com/kb/2497281/en-us. But none of the solutions on the page works. I tried all.

  Believe it or not, I have 3 desktops (2 windows based and an Apple MacPro) and this laptop Dell Latitude C840 with windows XP version 5.1 (which module HD and the battery died and I replaced and am trying to load the windows original XP disc supplied with the notebook). I've done with computers for over 20 years. The only ones I had problems were windows-based computers. Never had any problems with Mac. I was hoping that modern Microsoft has improved. If this problem is solved so maybe they have. Does anyone have a solution?

  OK, it's first of all, 'Mac', not 'MAC '. It is an abbreviation of "Macintosh", not an acronym. MAC stands for Media Access Control. And you're crazy if you think that the updates of the system for Macs don't cause problems. Just visit the Apple Support communities.

  There clearly something put on listening to the top with this machine more than just the hard drive and the battery. Works very well if you can, download SP2 and SP3 (you can ignore the SP1) machine, you know, then use an external hard drive or USB key to pass them to the affected machine and see if you can install.

  Use these links to download:

  Service Pack 2: http://www.microsoft.com/en-au/download/details.aspx?id=28

  Service Pack 3: http://www.microsoft.com/en-au/download/details.aspx?id=24

  Internet Explorer 8: http://www.microsoft.com/en-au/download/internet-explorer-8-details.aspx

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• Why the content of auto-scroll in Windows Explorer when you double-click an element?

  Why content (columns) to auto-scroll in Windows Explorer (on the left) when you double-click an element?  And how can you stop that?

  How to reproduce:

  -Open a Windows Explorer window
  -Big enough to be able to see the columns 2 and 3
  Double click on an element of the extreme right or the last column
  -All content automatically scrolls to the left so that the column of the element double you clicked is now in the first column of the window

  It is REALLY BORING because it causes bad clicks when it scrolls or to always click 4 times to open a folder or a file if it is located on the far right or the last column.

  How do we turn off this horrible Windows 7 'development '?

  Hi tom1138,

  
  You may need to reset all settings to default folder view in Windows 7 by following the steps:

  1. open the Start Menu, type regedit in the search line and press ENTER.

  2. If prompted by UAC, click Yes.

  3. in regedit, expand keys (folders) in the left pane to:
  Settings\Software\Microsoft\Windows\Shell HKEY_CURRENT_USER

  4. in the left pane, click with the right button on the BagMRU key and click on delete.

  5. click Yes to delete.

  6. in the left pane, click with the right button on the bags key and click on delete.

  7. click Yes to delete.

  8. in regedit, expand keys (folders) in the left pane to:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell

  9. in the left pane, click with the right button on the BagMRU key and click on delete.

  10. click Yes to delete.

  11. in the left pane, click with the right button on the bags key and click on delete.

  12. click Yes to delete.

  13. close regedit.

  14 close the session and log on or restart the computer to apply.

  EDITING REGISTRY WARNING:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Aziz Nadeem - Microsoft Support

• Why is there no Equalizer multi for windows 7?

  Why is there no Equalizer multi for windows 7?

  Yes, I understand that you can change the settings in media player to change the equalizer, but it is unnecessary, for example when you listen to online content, it is a step back! I can't find compatible programs that can afford it, that has always been available on windows.

  What kind of audio chip do you have?
  The AC97 (more frequent) comes with a nice utility to do this. It is only 10 tapes but...
  The utility (called Manager of sound effects) is installed in the Panel by default.

  Otherwise, try Panel > Sound select your speakers, and then click the properties > Enhancements
  One of these options is an equalizer of sorts with presets down below.

  VP Tech Services

• Why I can't install Skype on Windows 7?

  Why I can't install Skype on windows 7?

  * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  You should be able to.  He has the help of Skype support about installation problems to: http://support.skype.com/en-us/category/TS_INSTALL_UPGRADE/

  If this does not help, Skype has a support forum that may be able to help: http://community.skype.com/t5/English/ct-p/English?profile.language=en

• Why did google chrome constantly crashing and needing to be revived?

  I can ' t disconnect from a program or even change screen sometimes with a message asking if I want to restart Chrome or I get a message saying that the site I am at is "become insensitive".»  Rarely, chrome crashed using Windows 7. I do not have something to 8 which I n 't have to do in seven. Is chrome installed not right or do I have a parameter that is the cause. What is a software implemented in my computer? I have and you are running norton 360 on a regular basis. There are so many things to do and see on the Internet but it seems I'm always trying to figure out what's wrong. Help

  its so easy to uninstall the browser google chrome & so easy to reinstall?  Before you reinstall, restart the computer.

  http://www.Google.com/intl/en/about/products/

  Even with Norton - which I think is probably the problem.

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

• I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Hi all, I need to understand why my VMs will always grow so big they eventually run out of disk space, and then I can't resize them...

  Hi all, I need to understand why my VMs will always grow so large they finally running out of disk space, and then I can't resize them... see the screenshots below:

  

  So all my virtual machines are that looks like it's finally the 5 GB goes down to zero, cannot update things like Dropbox and all sorts of other things start to break. I then, go here and try to expand, but I get this error on machines to young readers:

  

  I think I need at least as much GBs on the system, as is the virtual machine? Done my MBA and smaller machines, is not possible. But when I move the virtual machine to a bigger machine like my iMac, with a big disc of TB, I can do the resizing. Is it the way it is supposed to work? Perhaps, I do not have this right...

  thx for all the advice!

  Yep, that's the way it is supposed to work.  The close, move it to the iMac, expand drive, then arrest him and bring him back.  Make sure you choose "move" not "copy" when migrating to avoid triggering the activation of windows.

  Regarding what is eating space inside the virtual machine, you will have to consider for the guest OS for more information (which are not a matter of merger).

  To free up space on the host, with closing VM, go to settings, click on the circle of little tiny refreshment next to the space bar, then if she said cleaning recommended, go into general and make a clean virtual machine.

• Why my passwords are always deleted when I delete my cookies even when I leave the clear saved passwords box unchecked?

  Why my passwords are always deleted when I clear my cookies and history even when I leave the clear saved passwords box unchecked?

  It happens whenever I have erase my cookies etc.

  May be your unsaved preferences.

  • https://support.Mozilla.com/kb/preferences+are+not+saved
  • https://support.Mozilla.org/en-us/KB/password-manager-remember-delete-change-passwords
  • https://support.Mozilla.org/en-us/KB/usernames-and-passwords-are-not-saved

• Re: Satellite M70 - why not until now no drivers for Windows 7 available?

  I'm working on Windos 7 nowadyas & everyting seems okey. The problem I am facing no. is lackin' Toshiba drivers > why so far no Toshiba drivers support Windows 7
  Thanks in advane

  I was working on the Vista SP2 and everything is OK

  Hello

  I think that it of normally that is up to now no drivers for Windows 7 available. What do you think?

  I mean Windows 7 is not yet on the market, and it comes out in October. If Windows 7 is out, I think that the support of the pilot will also begin. On Vista and XP was the same thing, until the version of the OS a few days and weeks later new drivers was released.

  I hope for you that Satellite M70 will build for Windows 7, but I put t know. I think we will have to wait a few more weeks until Toshiba will begin support of Windows 7.

  Moreover, on the Toshiba page we you can find some beta drivers for Windows 7. It is perhaps useful to you.

  Good bye