Attachments not opening in the appropriate program

Similar Questions

• Support for attachments not opening on the pre more

  Forgive me if I'm doing something wrong, but I can't get files supported by Doc View opening from an attachment.  What I read PowerPoint files are supported, but when I click on an attachment in an e-mail message, I get a message saying "Cannot find an application that can open this file."

  Am I missing something or is this a feature not documented in the 1.4 update?

  You can provide any help would be most appreciated.

  It happens. Yes the PPS is not supported.

• The icons on my computer are not opening at the appropriate place, how can I fix it?

  Right now, when I click on an icon, it goes to a game, all of them, internet, itunes, ect. Also the top bar which had shortcuts to things went too. They all have the same icon image too.

  Hi BrittanyDunbar,

  -What software changes you did on the computer before the show?

  -What version of the Windows operating system do you use?

  Follow the steps below:

  Method 1:

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  Method 2:

  See the following Microsoft KB article, then follow the steps mentioned in the section "Let me fix it myself" to solve the issue of:

   

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

• Systematically, does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path or file.» You can not

  Installed FF 16, 17, 18. Does not open in the normal administrator account, or with "Run as Administrator" but will be in SafeMode to W7. Changed the permissions (normal connection had to do in Mode without failure of W7, would not allow (connected as an administrator) can not delete the files from Mozilla in normal connection.) On rare occasions, with a fresh install, I could get it to open once, then not again. Searched the reg any mention of Mozilla or FF and cleaned. Tried FF safe mode, no luck. Check permissions after appropriators and multiplication of the rights of full ownership of all the files of FF, several reboots, no luck. Chrome, IE and SeaMonkey work very well. Using a fairly new installation of W7 Professional 64 bit on a Dell Optiplex 990 i7, 16 GB of ram. Had the same problem with another user on the same box. No problem on other computers without other problems in program.

  Finally have it running. Seems that the enterprise version of McAfee is blocking the installation of the program. McAfee uninstalled, reinstalled Firefox, installed McAfee and now, it's good to go.

• Note see the updates not opening Add or remove programs

  display updates not open onto aadd / remove programs

  Hello

  1. What is the exact problem?

  2. are you unable to use windows update?

  3. What do you mean when you say " Show updates is not open Add or remove programs"?

  Reply with answers to help you in a better way.

• Display problems are driving me crazy - when I click on a program already open in the task bar it does not open on the other open pages

  This happens if I click on a file or a file that is already open. The opened file will blink in the taskbar, but does not open on the top of any page is currently on the screen. When I click on previously open programs bring them on top as usual. Open another windows word file in the start menu did not appear at the top of the page currently open also. Any ideas on how to solve this problem?

  This happened after one of the three things - the upgrade of windows components, the advanced upgrade system of care or following a computer crash that preceded the front mentioned updates but I'm not sure that one.
  Thanks in advance

  Hello

  I suggest you to check the question in the new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• Acer Aspire E5 - 511. move the mouse/Touchpad cursor, but will not open other than McAfee programs.

  Just bought this laptop, original thought it was a big improvement on my Aspire 3 year!   Last problem after doing a full scan with McAfee is the touch pad or remote control will move the cursor but will not open other than McAfee programs.   The Windows (bottom left) symbol does not illuminate when the cursor is over it and I am unable to use the windows key + C to get the bar of charms.

  For the background, I couldn't install windows updates since I got this computer, two days, so do a scan to look for the reasons.

  Thanks for your suggestion Acer-Justin.   Sorted by switching off / reset the keyboard.   Problem sorted update using Microsoft who has found a problem with the update system and then installed Windows 10 - everything looks ok at the moment.

• whenever I click on a program, that it does not open and the 'open with' screen appears

  whenever I click on a program, that it does not open and the 'open with' screen appears

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

• __Undo "open as" as now all the files (and programs) will not open and the icon changed in the open air in the program.

  Do not uncheck the function "open as" to open files and programs.  I have here a way to return to original icons for the files.  This happened a week ago.  Cannot open any file or explore any original icon does not work, only the clicked program.  Can find no place to remove or cancel this operation.  Remedies, trhanks.

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot delete a PDF file! He says that they are "open in the other program", but it is not true. What can I do?

  Hello, I have Acrobat Standard XI and the following question.

  I can't delete files PDF, as the system continues to tell me that they are open in the other program... Of course they aren't! Tried to restart windows, but it did not work, I tried to reinstall acrobat and it did not work.

  If I uninstall Adobe Acrobat, I can remove pdf and get no errors.

  What's wrong? What can I do?

  Help, please!

  How are you trying to remove: from Windows Explorer?  Have you seen active thumbnail?  Can remove you them if you switch the view from Windows Explorer to the details?

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Copy-paste/Clipboard bug in Windows 7 if the target is not open before the copy operation

  Copy-paste/Clipboard bug in Windows 7 if the target is not open before the copy operation

   

  Behavior of copy - paste doesn't seem to work properly in Win7.

  I just migrated to a new machine of Windows 7 with new Office 2010 installed where I performed tests on the problem.

  If I copy the text to the Clipboard from an application open MS (for example Excel, but also other programs MS like windows Explorer, internet Explorer, etc.), and then open a fresh word (one instance open) document and paste the text, it appears as an oval-shaped blob image.

  Similarly the same problem when I subsequently open apps package and try to make a hem

  The problem does not arise

  1. If the fresh Word document is already open before doing the copy operation

  2. If another document is already open before doing the copy operation

  3. If the copy on an Excel cell (for example) make it, stick first to Excel, and then open a fresh Word document (single instance) and paste to that

  It is not just Word. Other target applications get the unwanted copy if they are open between the copy and paste.

  This bug is not present in XP.

  Thank you very much.

  OK, it's more clear now. It is Office 2010 which trashes the Clipboard when the first instance of a program Office 2010 is open (well, I tried only Excel and Word).

  Scenario 1: Open Excel, write a few essays in a cell, copier, copy to the Clipboard, open the new Word document, paste that and the oval blob error occurs

  Scenario 2: Open Word, write a few characters test, copier, copy to the Clipboard, open new worksheet Excel, paste that and the oval blob error occurs

  Scenario 3: Open Word, write a few test characters, copy to the Clipboard, close the word document, open it again, dough one and the oval blob error occurs

  Scenario 4: Open Word, write a few characters test, copy to the Clipboard, open another document, paste and no error occurs

  Scenario 5: With Excel and Word open, first cut an and stick to the others - works fine

  Conclusion: the windows clipboard is always corrupted when the first instance of an Office application is opened.

  Kind regards

  Andrew

• Update adobe reader dc 11 adobe reader software. emails with attachments not opening. can I go back to adobe reader 11 / or correction to send emails with attachments that will open?

  Update adobe reader dc 11 adobe reader software. When I send emails with attachments not opening to allow attachments to be read. How can I fix so that attachments can be viewed? or can I get back to adobe reader 11 where everything worked correctly. 3 computers NICU win 7 on 2 and earn 8.1 on 1.

  Hi Steve,.

  Please open Adobe Acrobat Reader DC, go to the Help menu and repair the installation.

  If the problem persists, you can uninstall Adobe Acrobat Reader DC, reboot your computer & install Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Skype is running in the background, but does not open on the screen

  Skype is running in the background, but does not open on the screen

  Uninstall ArcSoft software. This application adds a filter cell of webcam and is originally Skype crashing.

  Stack: \Driver\,ArcSoftKsUFilter, \Driver\ksthunk,\Driver\usbvideo,\Driver\usbccgp