Why any screen recorder does not work on my computer? __

Similar Questions

• Why Windows Update service does not work on my computer?

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  Suggestion 1: Get rid of Norton and Spybot Search and Destroy.  I do not recommend Norton/McAfee products, especially the suites (I recommend NO suites - simple is better.)  Spybot has been a good product, but a few years back, he just stopped doing as well.

  Suggestion 2 (cumulative, not necessarily independent - but maybe): cleaning of your Windows Update stuff...

  All the following items in the order shown - no matter what protection against that, you think you have.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  STILL no?

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
  
  regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try updates.

  If it still does not work after this - say parts of the former post once again (no need to conduct a new analysis of malware) from:

  "Now reset your Windows with this FixIt components update:

  ... but stopping at... «STILL no?'.»»

  Back - let everyone know what is happening.

• Why my product key does not work on my computer more

  my product key doesn't work anymore or is not valid, why what is happening?

  What should I do?

  Whatever the problem is, he does not have a Windows Update.

  Please visit http://www.microsoft.com/genuine/ and click on the button to validate Windows or validate Office, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click on the Windows or Office as appropriate and then click on copy (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA or OGA data diagnostic in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why the screen saver does not work in the two screens?

  I have a monitor connected to my laptop using the VGA connector.
  Laptop LCD is set as the primary display and the additional monitor is defined as the extended desktop. When the screen saver appears, it shows on the main screen. How can I make it work on both? (without setting the external display as a clone of the hand).
  The OS is Vista Home Premium

  Thanks for any help!
  El

  In dual screen extended mode, Win7 screen saver stops working after unpluging external monitor

  I have problems of this kind.

  I have listed what I've done to illustrate how to reproduce this.

  My OS is win7 32 bit.

  The replication steps are

  1. start on OS with integrated display (it is the system of n. b.)

  2. attach the HDMI (external monitor).

  3. turn on the extended mode and HDMI monitor as the primary device.

  4. set the screen saver 3D to be active and preview.

  Screensaver 3D drawing now works on the main screen.

  the secondary monitor (built-in monitor) working with black screen.

  5. hot unplug a HDMI monitor.

  6. the display of the 3D screen saver is changed back to the built-in screen.

  7. BUT the drawing of 3D on the built-in screen screensaver is STOPPED (= NOT updated).

  8 move the mouse, built-in monitor escapes from the idle screen status (operating system is still alive)

  Is this an OS behave as expected?

• Why my screen button does not work

  I tried to use my button page, since I bought my computer and never got to work. I use prtsc ctrl buttons at the same time and it doesn't work.  Anything else I need to do?

  How to use the print screen button

  http://www.ehow.com/how_4780142_use-print-screen-button.html

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Screen saver does not work properly

  My screensaver pc does not work properly.

  Hi NavjotChhina,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  The screen saver does not work on a Windows XP-based computer

  http://support.Microsoft.com/kb/916256

  Screen saver may not start in Windows XP

  http://support.Microsoft.com/kb/326719

• Sound Recorder does not work XP

  My recorder does not work.  The only way it works is that if I plug a headset with a microphone.  He worked at one time, but I ran HIJACK THIS and think that something has been removed.  Help, please.  Thank you!!

  You have posted on a Windows 7 forum, but referred to as "XP" - Please use the link at the top of the page to return to the XP forum.

  If you meant 'Windows 7' then use the audio troubleshooters in Control Panel, troubleshooting.

  If this does not help, check the devices errors & drivers updated in Device Manager.

• I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work. __

  I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work.

  I downloaded the driver appropriate on the acer site and installed.  Also, I tried to reduce my resolution.  None of them have worked.  I get a message on the acer monitor that says "Input not supported"

  You check the display settings and make sure that you do not have your resolution to high for this monitor. Its got to many many times.
  Please rate me upward if you find my post helpful. Thank you!

• Stereo video recording does not work after update to ICS

  HII am dido in the India. I've updated my xperia mini (ST15i) to ICS. After that the stereo video recording does not work. Last week, I found a new update for the CSI and I updated to construire.587, now also the same problem exsists. Someone please help

  You can fix it, but you need to root your phone

  Look at the xda forum how do (you must change a setting in a file config. Furthermore, also you can improve some other characteristics of the camera)

• Why xbox 360 controller does not work with all pc games

  Why xbox 360 controller does not work with all pc games

  Ask in an xbox forum.

• My on-screen keyboard does not work on Windows 7-32 bit...

  My on-screen keyboard does not work on Windows 7-32 bit...

  It displays error "could not start on-screen keyboard.

  Please help me and tell what to do...

  Hello

  • It worked before?

  I suggest you follow the methods that can help you reslove the problem below.

  Method 1:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can also try to disable and enable the on-screen keyboard and check if it works well or not. So follow the steps:

  1. Press the Win + U keys together to launch the accessibility.
  2. Then click on "Use the computer without a mouse or keyboard" (probably the 3rd option in the list).
  3. Then on the next page, uncheck the box that says "use on-screen keyboard.
  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  It will be useful. Let us know for help.

  Kind regards

  Ramata Thakur.

• screen saver does not work when magic jack is pluged in. unplug mj it works

  screen saver does not work when magic jack is pluged in. unplug taking magic, the screensaver works properly.

  09/05/10 the MagicJack has released an update that prevents the screen saver and "standby" mode. They are aware that people are upset on this issue, but they seem not to care.

  Here is a simple solution to the problem. I've used it since 10/09/10 and it works perfectly.

  Restore the functionality of screen saver / display after MagicJack diverted these features...

  Click on the Start button in Windows 7

  type cmd in the search box

  Right click on cmd and run as administrator if you are not running as an administrator it will not work!

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY

  Make sure that you type the capitol letters and lowercase no look of magic make 'J' ack it's capitol as well!

  Press enter

  Now unplug your magicjack

  Restart your computer and let the unplugged MagicJack

  Once the computer starts together your screensaver for a minute then let it sit for a minute activate screen saver...

  Now plug your magic let sit for one minute Alto screen saver is now active!

  If you want to activate the sleep as well, follow the same instructions as above, but simply type this line instead.

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY SYSTEM
  
  If you follow these instructions, your sleep/screen mode will work as before.

  Kind regards
  ZzyzxDude

• Right-click the folder or any other function does not work, and I don't have a sticky key...

  Right-click the folder or any other function does not work, and I don't have a sticky key...

  While I click right click in windows Explorer has stopped working... Help, please!
  

  A Virus Scan. Your PC can be infected. If you have not installed it, use MS Security Essentials if you have a genuine Version of Windows. It's free.

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com