Why are my blurry images on android?

Similar Questions

• Why are these blurry photos?

  I have a Canon Rebel T3i. I took a few pictures of group w/tripod, without tripod, w/flash, no flash, different openings, many on automatic mode. All about the autofocus. All of them come out blurry, especially people on the ends. The joint may seem small ok on this web page, but if download you it and watch it 100% you will see what I mean. I have two cameras T3i and they both give the same results. I'd probably get a better photo with a phone. Any ideas?

  

  dtrachtman wrote:

  The lens is a Canon EF 18-135. Photos taken at 1/8 to 1/250 shutter speeds and F3. 5 - f9.0. Why the fact that the ends are more blurry implies it is a poor quality lens? Should what kind of lens I buy? Thank you

  The 18-135 has a pretty good reputation, but for that you would use it at the wide end. Lenses with a long zoom range (and yours is long enough) tend to be more marked in the middle of their range to the ends. The ends of your group are fuzzy because the sharpness falls off because the topic becomes more distant from the center of the lens. More expensive lenses tend to do a better job to minimize this effect. 1/8 of a second will work normally if you are using a tripod, but it's too slow for this kind of picture, because the subjects will move. I wouldn't use anything slower than 1/160 for group photos, the only exception being if a flash powers most of the light. For group photos, I use the Canon 17-55mm f/2.8 IS usually on a 7 d body. This lens is very good and cheaper than it used to be. If this goal would solve your problem, I don't know. Maybe you could rent or borrow one and try it. Note that while you would always use it at the wide end, he doesn't have to worry about being strong at 135 mm.

• Discussion questions with rebel eos of cannon during the action of street shootings? Why are my blurry pictures?

  In situations on a tripod or in most other situations my camera and objectives seem to focus well. In a stable situation where the subject does not have many, I simply turn the wheel around the focal point I want the camera to focus on my photos are usually good, but I found that I love street photography and capture people who do things. Sometimes, they are moving toward or away from me. .. I use a wide-angle F2.8 and generally have no worries to keep larger than the focal length shutter speed... I keep the camera autofocus and AWB... So why are both my photos blurry... I don't have time to every shot to lift the unit and turn the wheel to emphasize a particular point if I usually leave a central development... What should I do to get my shots in short without looking through the viewfinder with each stroke?

  Note that the update "AI Servo" difference in mode of development of "One Shot" in terms of what it does when you press the shutter button.

  In "One Shot" mode, the device uses "Focus priority".  This means that the camera will NOT take a hit if the lens is in auto-focus mode until it can confirm that he was able to focus on the selected AF point (or on a Focus point if you let point AF Auto selection) in brief: realize the development is more important than shooting at the precise moment when you press the button.  That's why "focus priority".

  In "AI Servo" mode, the device uses "release priority".  This means that when you press the shutter button completely, the device will take the shot immediately and it will do so if he had time to reach the focus... or not.    In short: capture the shot at the precise moment when you press the shutter button is more important to achieve focus.   That's why "release priority".

  If you quickly press the shutter button to take a picture, the camera will shoot first and development worry later.  You half - press the shutter to allow the device to reach to the point before you fully - press the key.

• I have a camera Eos Rebel T5i. Why are there two images uploaded instead of one?

  Why two images instead of one are downloaded on my computer?

  Press the Q button and select where it says L + RAW, click Select and change it to what you want.

• Windows Movie Maker - why are my blurry pictures?

  I'm doing a movie in Windows Movie Maker and all the photos that I bring, which are perfectly clear, eventually blur in the film.  Is anyone know why and what can I do?

  Hello jscharmann,

  Thanks for choosing Microsoft answers Forum!

  I would check my transitions and effects because one of the consequences is that you can image blur.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f02d7249-5247-49C9-9b8e-8c32dede2ee71033.mspx

  I hope this information helps.

  Thank you for your ad.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why are my blurry pictures?

  A time to return my camera was not made well autofocusing. I sent it in for repair. I have not used much lately. I also have some flash photos of my granddaughter last weekend and they are not to the point. What would be the most likely cause of them not being is not in focus. Any help would be appreciated.

  Thank you

  Carl

  Check that the AF / MF switch on the lens is set to AF. I've been known to switch to MF while installing a lens every so often.  Also according to the objective, some have remote control switches and again I she had set out for many & tried something close to forget to change the position of the switch.

• Why are there many images of icons, keyboards, etc. in the media of my photo?

  They photos are in my media center drive and the media. I never took these pic, not sure from whence they came.

  In WMP, go to organize, manage libraries, photos and check records it is followed for the photos.  It seems that it is looking at sample files that could be with a graphics application.

• Why are my items (images, lines, etc.) in a different place in preview mode?

  Hello

  I am new to Adobe Muse CC and I have a few problems. I'm doing a site of portfolio for myself.

  The problem is that I have some decorative lines (manufactured from a box) and in the main mode (or master), seems properly, BUT when I press preview, the lines are all over the place. What can I do? Is there something wrong in my settings? I also did a test post and the same problem was found here. I even checked the tutorial where the lady has used lines on the same path but this fine finished.

  I feel betrayed, please help.

  OK, here is a joke, I hit the same problem tonight.  I solved it with the forms of grouping, right-click and selecting "copy size and the Position of" and then you can select all or specific breakpoints.  I hope it's useful.

• Why are the same images in the scenario?

  When I do a picture and then I create another frame, the 2nd frame and chassis 1 alike even if I made changes in the 2nd frame.

  Change on the timeline can appear only in keyframes. The first image in any layer is a keyframe. If you add images, then the content of these additional images will be identical to the first keyframe. If you change the art in any image after a keyframe, you actually change the art to the keyframe. To show change, create a new keyframe, and make the change at that second keyframe. Look at the tutorials that come with Flash for more information on the basic animation.

• Why are the jpg created from completely blurry (fuzzy) panoramas? The dng image is strong!

  @ !@

  Why are the jpg created from a panoramas stitched by completely blurry (fuzzy) LR6? The original images as image panorama created by LR is strong!

  Windows Live Photo Gallery is limited to the image files that are smaller than 100 million pixels: "this problem occurs because, by default, Windows Photo Gallery will open not an image file that is greater than 100 million pixels."

  https://support.Microsoft.com/en-us/KB/2725211

  It opens OK, but fuzzy. Here is the message I get when I try to do something in it with your JPEG... or my JPEG:

  

  Your JPEG's 109 million pixels.

• Why are images important always larger than their size?

  According to the instructions in a thread I had here last week, I got all my images DVD created at 720 x 534 pixels for first Pro CS5.5. But when they are introduced into a sequence DVCPRO50 NTSC Standard, they are strongly attached. The original in one of the examples is the following:

  

  But what that same images in PP, it is size up like this:

  

  It is still proportionally correct, but many top and bottom of the image disappeared. The sequence encoded MPEG-2 and the disc I made a display test just like that.

  Why PP done, and how can I get to use built to size images to be used 1:1 in a sequence rather than be reduced to about 115 percent of the size? Do not compare this way, but this has never been a problem with Final Cut Pro, which I am spending. Stills, created the size of FCP needed 720 x 540 display and finished exactly as they were made in Photoshop. The only area of the image lost was the normal bit of scanning DVD display to your TV.

  Hack square 720 x 534 pixels

  will work only if the option to stretch the image lit.  The theory is that the PrPro extend the image down to 720 x 480 - with which close BY 0.9.

  If you go to scale images to advance, first convert BY 0.9 and then crops to 720 x 480.

  A question however, are your images in portrait format?  720 is the width to the height.

• Why is my blurry print product?

  Hello

  Today, I received two prints by frozen Apple 20 x 30 cm (automatic size).

  The thing is, they are really blurry and have a huge lack of detail.

  I ordered the the course Photos-app 1.5 (370.42.0).

  The files that I used are .tif to around 80 MB →, this could be the problem?

  It may seem that the files have been reduced and then enhanced...

  So I should try again with JPEG?

  In addition to the colors are not as bright bright on the screen (I know on the screen, they are always brighter)

  So I have to ask: does Apple feel even support ProPhoto RGB?

  It may be, but it would be an easy solution for my future orders.

  Important information: I'm living in Germany, so the products have been printed in the Netherlands

  Thanks for the advice or solutions, so I'm going to have better results next time.

  It may seem that the files have been reduced and then enhanced...

  It's the cause - it is not possible to increase the pixel size f photo without reducing the quality of the picture - if your original photos are not enough large then you must use small images feel - upscaling will not succeed

  So I should try again with JPEG?

  The best possible results would be with original photos

  Apple Print even supports ProPhoto RGB?

  No - photos must be sRGB

  For more information, click on your country here- http://www.apple.com/shop/help/print_products/routing

  the American section, here's some info on getting best results four steps to great books, cards and calendars in iPhoto - Apple Support

  and always get an overview of your order in accordance with the recommendation of Apple Preview before ordering - Overview a paper project in Photos or iPhoto to avoid problems - Apple Support

  LN

• XOOM FE: Why are not all compatible games?

  Hi guys just bought a motorola fe and so far everything is going great. I was just wondering why there are some games on the android market, which is not compatible with motorola fe. Games as gta3, deadspace, fighting and other modern... games there at - it an update, that we need? Thank you

  so, for the other games namely fight 3 and GTA 3 is never compatible with the fe xoom? I tried to install the games using the link that was provided, but always said that it was not compatible.

• Is it possible to pin a background image for (android) Tablet, that it doesn't matter what I do

  Is it possible to pin a background image for (android) Tablet, that it doesn't matter what I do

  Hello

  I believe you are trying to locate the image in the layout of tablet or phone.

  Due to lack of support on some browsers and Smartphones, pinning is disabled in Muse for Tablet and smartphone layouts.

  You can see this feature in future versions of Adobe Muse.

  You can use the scroll effect to achieve this as a solution.

  Select your items you want "pinned" and open your scrolling check Motion Control Panel the check box for the movement and the value of all the values to zero.

  Here is the screenshot for help.

  

  Concerning

  Vivek

• Why are some widgets locked?

  Some of the widgets are not locked. I can't control at all. Anyone know why?

  Don't know what you mean by locked... You try to scale and drop a trigger area and/or the image of the widget?

  ... If you have to double click on the area of trigger/image to manipulate them... so the dotted line with the small x around the full widget is only there to define where your assets are located in the widget... If that makes sense...