Why change something that is perfect?

Similar Questions

• Some CDs that work perfectly well in a CD player, cannot be read by my computer, while other CDs work perfectly fine. Why? How can I solve?

  Why did make some CD work perfectly fine in my computer and others that work perfectly well in a CD player, no? It's frustrating. I'm trying to import using iTunes. The computer just tells me to insert a CD. All the answers?

  Hello

   
  1. What is the brand and model of the computer?

  2. do you have a third-party software installed on the computer of engraving?

  I suggest you to insert the CD in a different computer and check.
   
  Method 1:
  a. remove the CD/DVD media and check for scratches, cracks, or stains that can make the CD/DVD hard to read, so the support is scratched or cracked, you must enter a filter replacement.
   
  b. If the DVD is dirty or stained, clean the CD/DVD with hot water and a soft cloth.
   
  c. ensure that the DVD is clean and completely dry before re - insert in the CD/DVD drive.
   
  d. restart the computer and press a key when you are prompted, and start the installation.
  Method 2:
  Run the Fixit described in the article:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
   
  Method 3:
   
  Perform the steps described in the article:
  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052
   
  I hope this helps.

• When I try to access XPMode in Win.7 - it either requires a password that has never been, and most of the adjustments or places to change something is grayed out

  When I try to access XPMode in Win.7 - either, he asks a password that has never been, and most of the adjustments or places to change something is grayed out in the newspaper on the page for XP, or on my computer where there is a chance to change things like "debt", etc.  My registry maybe THAT screwed up? Nothing I try to do seems to help. I can delete the virtual machine and the XP mode and then try to re / add?  Running out of ideas... ALSO, the repair of my system does NOT work!  No restore points that would take me any more than a few days back.  This registry problem that happened there is at least a month... Thank you-Jerial

  Hello

  The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• Why the things that are positioned correctly in design mode inexplicably don't change not when I go to preview?

  Why do things that is positioned correctly (at least I think they are) in design mode, inexplicably spend when I go into preview mode in Muse?

  Make sure that the stray item is not pinned.

  

• HPPhotosmartEssentials.msi and can't make repairs on something that are not installed error

  This prevents the busy when starting windows installer... I reinstalled the HP printing software again and again and I get all green checkmarks with the diagnosis of HP, the eq seems to work perfectly.  When pointing the file in a temporary folder, it is said cannot perform repairs on something that is not installed. When you point to the .msi on the original disk file, it does nothing. WHAT ARE THE XP REGISTRY KEYS TO REMOVE THIS NUISANCE?

  It would be I think that it is somehow a bug in the HP upgrade process that will not remove previous versions. I think I have a hpphotosmartessential version 3.5 open now.

  It's not urgent that I can click cancle 1000 times before windows finally gets the trick.

  I have read enough about it and continued each method to remedy this and I'M NOT GOING through ANOTHER afternoon OF RE - INSTALLING SOFTWARE from THE DISC.

  I expect an HP engineer to answer this before someone else, that says something I've already read, don't.

  This must be a registry entry that is not processed during installation and upgrade.

  Because I didn't misplace the entry or move, I expect you to know where he is and I wish to eliminate or make a change to one of its key...

  Thatnk you in advance!

  Note: Make sure to create a registry backup Open regedit, file > export & save Office

  To access this location:
  Click on start then run type regedit

  Register window opens

  Click on + and then HKEY_CLASSES_ROOT/Installer/products

  Select any folder under products, then click in the right pane you will see the name of the product (WebFldrs XP) usually where the status, Solution Center, Scan, Destinations and etc. So check each folder under products if you find the name of the product that keeps popping up delete the folder and that will solve the problem or you can use Ctrl + Find and all the msi name box that keeps the popup type & remove the folder itself

  It is the shortest method to solve the problem without uninstalling/reinstalling software.

  If the problem is not resolved it's time, you will need to uninstall/reinstall the software.

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• Satellite C660 - changed something in the BIOS

  Do not display the first page (POST) to start-up businesses.
  In the BIOS has changed something as "FAST CHECK POST is true"
  In the upper left corner of the "_".
  In response to pressing the F2 - F8 del does not (in the bios to get both?)
  He opened the keyboard under the battery removed, the result is lost during a BIOS gave no sign of life.
  BIOS flashed to date, the zero on the ground.
  Operating system starts OK
  Help me!

  Hi hassen,.

  I'm a little confused about your ad Mr. does that mean exactly? You can't get into the BIOS but Windows starts correctly, no?

  Well, usually you can get into the BIOS if you press the F2 key once you have turned on the computer. Therefore, not only press one key to access the BIOS and not both. Press the F2 key repeatedly until you see the configuration of the BIOS.

  Check this box!

• error: "an operation was attempted on something that is not a socket"

  Suddenly, I have no connection to my pc which is connected directly to my d-link cable.  Other computers that use wireless have no problem. My system shows "the network has not assigned a network address of the computer"... then I tried, by messages on this site, to run cmd and ipconfig/renew and ipconfig/release.  After renew, I get an error "an operation was attempted on something that is not a socket".

  ideas?

  Hi sdams,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  This error would occur if the Winsock registry keys are damaged or corrupted.

  Refer to the article below and reset the Winsock settings to default and see if it helps.

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  You receive an error "an operation was attempted on something that is not a socket" message when you try to connect to a network

  http://support.Microsoft.com/kb/817571

  Windows XP: TCP/IP functionality and Internet connectivity are disrupted when you uninstall McAfee Personal Firewall

  http://support.Microsoft.com/kb/316522

• I can't open anything in the Control Panel, network and sharing Center or profile management, I have accidentally changed something?

  Don't know if I've accidentally changed something or not in my profile, I just want to know how to fix it

  I'm sorry but you did not just provide more information other than say in effect "it's broken". I can't possibly guess what is happening with your computer based on what you wrote. Probably the best course of action would be for you to take it to a qualified computer technician (it won't be a type BigComputerStore/GeekSquad of the place). Otherwise:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  How to post

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question
  MS - MVP - Elephant Boy computers - don't panic!

• Every time I try to install something, that I still get a notice saying that it is a current installition.

  Whenever I try to install something that I keep on getting a notice saying that there is a current installition to complete, but I don't know what it is or how to find, how can I solve this problem?

  Hello

  ·        You did changes to the computer before the show?

  ·        It comes with everything that you install or is limited to a particular application?

  ·        You receive an error with the error code?

  Method 1: I suggest that you put the computer in a clean boot, and then try to install the program and check if it helps to find the cause of the problem:

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also try the steps in the link and check if it helps:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• I can't send email from Quickbooks, he said: I need to change something in the registry by default

  I have windows 7 and that you have just installed quickbooks, I can't send email from quickbooks, it says that I have to go and change something in the registry by default or some thing so my contacts through to Quickbooks, I tried to use windows live as my default but it does nothing, any suggestions will be appreciated Mandie

  Original title: can someone help me

  M

  This is probably something you should ask to Quickbooks as they are the experts on this subject.

• All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  I run FrameMaker unstructured 12 and FrameMaker 11 (for use with only the heritage project files) on a Win7 PC. The chapters in my FM11 file book for guide increment a new product user normally in FM11, but something bad, after you save the formatted FM 12 FM 11 project files.
  The book file includes:
  -Product Guide Cover.fm
  -Product GuideTOC.fm
  -Product GuideLOF.fm (list of Figures)
  -Product GuideLOT.fm (list of Tables)
  -Product GuideContent.fm (chapters 1-10) - book files dialing properties: Chapter 1 (digital)
  -Product GuideIX.fm (Index) (Chapter 11) - book files dialing properties: Chapter 2 (digital)
  
  Note: The chapter headings (e.g. 1 - Introduction, 2 - Specifications and so on) in the product GuideContent.fm and GuideIX.fm files are in the format paragraph Designer like: (the Auto-Numbering Format enabled) H: < n + > \t
  However, when I update the book, the Index seems formatted as Chapter 1 instead of Chapter 11. It seems that the conversion to FM 12 messed autodial in the product file GuideIX.fm, so that the only way to increment the value would be to manually update the building blocks in the file to H: IX.fm \t H: < n + > < n = 11 > \t (which I do not). Any suggestions would be greatly appreciated!

  Thank you - Randall basin

  Hi Ran,

  It's for anyone finding the subject, given that you and I come to chat with a screen sharing...

  After watching your files, the "chapter number" are really only section numbers, with all 10 of them in the same file FM. That means that really impossible to use the <$chapnum>for many of them and the index.

  In most cases, you would be still able to use the Fm 5.0 manually counting technique paragraphs title with an indicator of the series and the counter (e.g. H:), but you also have a number of positions within blocks of text not included in the stream.

  This seems to be your address update index position correctly.

  So, the only way to get the appropriate index number is to control it manually. You have at least 3 choices:

  1. Enter it manually
  2. Manually enter the AutoNumber box for the index
  3. Enter it manually in the numbering section of the dialing properties tab.

  However, all these things are extra bandages on top of your existing bandages, and I prefer to see the problems resolved instead of the 3 'Hacks' I have provided.

  For the sake of closure, please check the question if this seems to be specific for you.

  Sorry for the bad news (ish)!

  -Matt

• development module when I change something with correction of the area I can't move to the next image with the right arrow key

  Hello

  I work with the module development and when I change something with correction of the area I can't move to the next image with the right arrow.

  Is there a solution?

  Norbert

  I think that Yes you are talking about "Spot healing.

  So once you have used the tool, please click "Fertig" at the bottom right of the image.

  Try, and then use the arrow keys.

• I sent a long text on my iPhone is and he went from English to Chinese characters.  Why did do that?

  I sent a long text on my iPhone is and he went from English to Chinese characters.  Why did do that?

  SSounds as a possible coding glitch, msg is read as instead of UTF8 UTF16 may be.  Probably caused by the carrier.

• Is "com.historiograph.plist" something that people know? It was created at the same, I accidentally downloaded MacKeeper

  Average of horrible judgment, I downloaded something that turned out to be just another way for MacKeeper Run Amok.  I turn on my firewall before you download anything either, and I'm glad that I did because weird things happened.  Chrome unexpectedly quit without even reporting it closes unexpectedly.  I also got a message asking to allow connections from the application "historiograph.  After made what I thought was a good uninstall of MacKeeper, I found this 'com.historiograph.plist' in hand > library > LaunchDaemons with the same created as MacKeeper.  In addition, there were two other .plists created at the exact same time com.lymphangiotomyUpd.plist and com.apple.sideb.plist

  Is one of this natural look or will I be paranoid?

  Hello That_One_Guy,

  Historiograph is not a known demon so I can't tell you if it is harmful. It is not part of any Apple software, so removing it will not cause problems with any Apple software. It is possible, that it is bundled with other software on your Mac that you would like to keep and could cause problems with this. It is also possible that the software that created it will recreate when you remove it. To remove it, I would recommend starting in safe mode (combinations of keys start for Mac - Apple Support) and then removing to make sure that the demon is not running when removed.

  If it does not or you have any other questions, feel free to ask me questions.

  Thank you ~ Bryce