Why have I lost my form the vectorscope and wave?

Similar Questions

• Why have I lost 400 emails.

  Why have I lost 400 emails.  Last night I had about 523 emails.  Before my eyes, it changed to 123.  What happedned where they went.  They were emails that I haven't read.  They could be important.  That's happened?  How to make a comeback.  Where did they go?  It was in outlook express.

  OE reviews | Current view | Show all messages (check/enable)

  Cautions general OE:

  N ' not use Inbox or sent items to archive messages.  Move them to local folders created for this purpose.

  -Empty the deleted items folder daily.

  -Frequently perform a manual compact of all OE while records that "work offline".  More onhttp://www.insideoe.com/files/maintain.htm

  -Do not cancel automatic compacting, where it would happen and do not try to close OE via Manager tasks or stop your Automatic compaction machine can take place.

  -Disable e-mail scanning in your antivirus application.  It can cause corruption (i.e., loss of messages) and offers no additional protection:

  Why you don't need your anti-virus to scan your email
      http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  ~~~~~~~~~~~~~~~~~~~~~

  There is some support for Outlook Express (Windows XP) in this forum: http://social.answers.microsoft.com/Forums/en-US/xpnetwork/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• in the photos on macbook pro installed yosemite pictures have a letter J in the corner and I can't change them

  Some of my photos have a letter "J" in the corner, and I can't change them with photo-editing tools. Someone knows why?

  The letter 'J' means that the photo is part of a pair of "GROSS" and "JPEG", and the JPEG file has been selected as the original image file.  If the RAW file is selected as the original, you would see an 'R' in the corner.

  What exactly happens, when you try to change these photos? You get a message from a missing file? Or what's happening?

  Try to pass the original JPEG on the original RAW.  Open the image in EDIT mode, if you can and then use the command "Image > use RAW as the Original. This command is only available in edit mode.

  

• There were add - it and I lost it after the update and I don't remember his name

  There were add - it and I lost it after the update and I don't remember his name
  This is the module to show me the source of any content capable of click
  like the pictures on twitter or Facebook
  also videos on youtube
  and he showed a small icons with form of small pic on it with different colors
  and also sometimes in the form of small lock on it

  now I need to know what this add - on the name or how to get it back

  It seems that this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/redirectbypasser/

  

• My second monitor lost functions of the menu and the image.

  Original title: monitors identified with reverse pilots

  I upgraded my second monitor.  After loading the new driver for it, he was assigned to the old monitor and the new monitor is now the old driver.  Features on the old monitor do not work and I had to make the new monitor my primary monitor. It's ok but the old monitor lost functions of the menu and the picture is now crap.  Also, when I open PS it is said that the profile of the monitor is deffective. I ran the calibration software, but that did not fix it.

  It looks like this: in the display settings, in the drop down menu below the pictures of the monitors, number 1, said SyncMaster 2443BWT on NVIDIA GeForce GT 9599.  Number 2, said SyncMaster digital S23A350H on NVIDIA GeForce 9500 GT

  This is backwards.  How can I get the correctly identified.  or is it important.

  Thanks for any help.

  Loïc

  I ended up uninstalling the driver for the 23 "and disconnect.  This put the 24 "at number 1 and automatically back to the only driver left, 24".  Then restarted with the 23 '' reconnected.  It assigned the pilot generic and in fact number 2. Yes the 23 "works very well on the generic driver and I have the right driver for the 24" so I'll leave well enough alone...  I had downloaded the drivers from the monitor on the Samsung website according to the instructions on my cd that came with them.   I never thought to check the updates on my nvidia graphics card.

  Thank you very much for this information.  I'll do this and keep my fingers crossed he doesn't mess up something else.  This Vista is so tempermental.

  Loïc

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Recently, I copied some old tapes vhs to dvd (using a Panasonic dvd recorder). They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Hello

  Its probably an alignment problem - that is, the Panasonic is written outside of the
  able to read DVD computer settings.

  Normally, if you want to create CD/DVD that can play on standard devices (for example
  like the Panasonic) the MASTERED format should be used. Does the Panasonic
  offer a choice or formats? If the Panasonic uses MASTERED, then this is definitely one
  alignment problem. If the alignment can be defined in fact would cost more than the
  device being aligned (if you could find someone who could actually do).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently.

  Problem with the screen!  Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently.  Can someone help, please step by step details.  Thank you.  Have Windows7!

  Original title: screen

  Looks like a monitor / setting screen. Horizontal and vertical positions may need to be adjusted in the monitor buttons. Another possibility is that the display resolution is not optimal.

• I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nik

  I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nikon cameras do not. Everyone knows about this problem?

  Looks like you are applying (accidentally) a "Preset" for these photos. Make sure that there is no preselection specified in the import dialog box, and the first (bottom) in the history of develop does not list a preset.

• r beeb used before on pc. The problem is that these two PCs are thrown NAWL avay chrased long, I hava a few photos on the program and its impossible to buy a new number for one that oldc product. What should do?

  r beeb used before on pc. The problem is that these two PCs are thrown NAWL avay chrased long, I hava a few photos on the program and its impossible to buy a new number for one that oldc product. What should do?

  If you have the serial number, you can contact the Adobe Support via chat (when they are available - not weekend) and ask them to reset your activations.  Which will allow you to reinstall and activate again using the serial number, which you have now.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Why have I lost my web pages centered when I updated the site?

  Need urgent help focus my web pages after you make updates to the site! Only the index page is always centered. I use an external stylesheet, but did not make any changes to it (I don't think) when I updated the site. I think I have the margins and the text defined as recommended. I must have screwed up somewhere, the CSS, but can't find it. Can someone please look at the URL?  www.labreastspecialists.com

  Change your CSS to this body.

  body, td, th {}

  do-family: "Times New Roman", Times, serif;

  color: #FCFFDC;

  Width: 960px;

  Auto margin: 0; / * with width, it is centered * /.

  }

  Correction of errors in validation of your code.

  [Valid] Validation of the markup of http://www.labreastspecialists.com/ourlocations.html - W3C Markup Validator

  W3C CSS Validator results for http://www.labreastspecialists.com/ourlocations.html (CSS level 2.1)

  Nancy O.

• Why have I lost all CD imported from my iTunes library

  I lost all my imported CDs and all the selections of my iTunes library painstakingly compiled over the years of effort. More than 110 GB of music disappeared from one day to the next day when I upgraded the software at the end of 2015. How can I get these without restarting the whole process again? The only thing left in my library is the purchased Playlist. Can someone help, please? Thank you.

  On some occasions, your iTunes library database may be affected by an iTunes update - nobody seems to know exactly why, although its been suggested that it would be the result of a conflict between the installation of iTunes and some anti-virus software program or other processes that monitor changes to files on your computer (for example the Windows Indexing service').  The content of your library, i.e. the media files and folders should be affected, but without a database iTunes file doesn't have information or links to these files.

  To restore your library to a working state (which may not be necessarily as it was immediately before installing the update) see user turingtest2 on the empty/corrupted after upgrade/crash iTunes library.  For later use, you must create and maintain a backup of your library iTunes, and always update your backup before installing the iTunes update.  For a suitable and recommended method, see backup your iTunes for Windows with SyncToy library .

• Why have I lost all my work?

  I'm relatively new to Illustrator. Last night, I lost about 8 hours worth of work I put in a project of Illustrator, and I have no idea why. I was wondering if anyone could shed some light on the situation.

  
  At one point yesterday morning, I recorded my project in PDF format so that I could share it with someone. I continued to work on the file and kept saving my Illustrator project that I worked. At the end of the day, I closed my project. When I tried to reopen this morning, all my changes disappeared. Even more strange, the only version of the Illustrator file I have is a version even older than what I had saved in PDF format. And still more strangely, I got a PDF of my final working copy, but no version of Illustrator of it. Note that I have never created a PDF version of the book that I did at the end of the day. So technically the PDF file I have on my system should have only one I sent earlier in the day.
  
  What possibly could happen here? I'm a little upset that I lost 8 working hours. But more important, I want to know what I did so that I wouldn't do it again.

  Thanks for your help!

  GS,

  For safety, you always save a copy in PDF of Ouedraogo and stay at Illy, or save normally before save you to PDF and then close the document in order to avoid this trap.

  You saved the file PDF without having checked preserve Illustrator editing functions, which means that the document is only saved in the possibly simplified PDF version.

  Save as PDF with preserve Illustrator editing capabilities ticked, or save as to create a PDF Compatible is TICKING, you actually save two files complete, an AI and a single PDF.

  You can recreate the document HAVE entirely or partially of the PDF, according to the work, by opening it to Illy and maybe redo parts. Some aspects of the work are the same, some are simplified in the PDF file.