Why my cursor is red and work stoppage?

Similar Questions

• External USB hard drives lose its connection and work stoppages. __

  External USB hard drives lose its connection and work stoppages.

  History

   
  Windows 7 Ultimate - 64-bit
  I installed it on a HP Pavilion, OS, 64-bit, and I have this problem.
  People report that it does not occur with Windows 7 32 bit OS.

  Problem:
  Any brand of external hard drive USB (and other USB devices sometimes) lose its connection and stops working only when copying large files internal drive to external USB drives.
  The USB device may appear to work properly when Windows first starts, but later stops working (crashes computer) after the start of large files to copy. You must restart Windows for the USB is working again.
  This only occurs when you copy files large files to THE USB port, not on the internal drive. It happened when I synicing my IPhone with Itunes when it started the synchronization of music files.

  According to the suggestions I have:
  1) updated the BIOS from the websites of the manufacturers.
  (2) power management disabled on the USB hub for disks
  (3) ensure that the BIOS for Legacy USB is set to.  I don't have this option in the BIOS settings.
  (4) this is not a motherboard problem, it is located on three different MB that we use.
  Also tried three different USB drives and different cables.

  Because I tested with two different computers updated and USB drives, our opinion is that this problem indicates that the Windows 7 64-bit operating system.

  Someone knows a solution?

  Hi Jh6284,

  Thank you for posting.
  What is a version of Windows 7 RC or RTM?

  You can try to uninstall and reinstall the drivers for the USB ports in Device Manager.

  UNINSTALL ALL USB ENTRIES IN DEVICE MANAGER ASSOCIATES.

  1. click on START
  2. right click "Computer" and select "Properties".
  3. on the left side, click on Device Manager.
  4. expand the 'USB Bus controllers' category
  5. right click and uninstall all THE references listed
  6. restart your computer and check if it works.
   
  I suggest you go to the Web site of the manufacturer of your and try to install the latest drivers for the chipset. Make sure that install you in compatibility mode there is no driver for Windows 7 64 bit.

  Please go through the article below to install in compatibility mode.
  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f

  Kind regards
  Technical support of Microsoft-yama.

• Why my cursor only does not work on my taskbar, or the current window, in Windows 7?

  My cursor will work not on anything except the window I'm randomly or the taskbar

  He will do one of these:
  -Only I would like to click on stuff on the taskbar and when I put the cursor one window, it will not highlight or let me click what whether indoors, except that it will highlight reduce, restore down and out of the buttons but nothing when I click on them, and I can click right-click on the icons and choose whatever options don't appear for the programs.
  -Only allow me to things in the window, in that I currently have a click. I can communicate with anyone inside the window. If I use Google Chrome (which is the browser that I use usually) then if I click on a tab, it will be x on this tab. Nothing on the taskbar will highlight.
  Sometimes one or more of her below will be added with either of the above:
  -It will be as I have a key or something, sometimes it seems that I am now shift, sometimes ctrl, sometimes he does things that seem to do things that would happen if you took several key
  Ex: If I click on something in a program, it would produce a result that seems as if it was the result of a touch and half of a result to hold another half.
  Ex: Ex: when you play the popular game 'Minecraft' if I use a mod to give me a stack of 64, it does give me only one, as if I were a right-click instead of left. Other times when I'm in my inventory, is as I am now shift when I'm not, but it also makes things that normally occur when I hold down the SHIFT key and click.
  -My cursor is randomly as I'm left click or middle clicking.
  -I forgot something
  Resolution of the problems that I tried:
  -J' tried to withdraw using the touchpad and wireless mouse.
  -J' tried to reset my computer (it worked, but the problem is quickly returned)
  -J' I pulled up Task Manager to check some things
  After having pulled up the Task Manager, the problems stopped. but after awhile it started to come back again so I rebooted the Task Manager and it stopped again, but evertime I've done it time that the problems went got short, and now it doesn't work at all.
  -Pulled up the Task Manager and any suspect google looking for background programs (that didn't increase much info, because I have very little knowledge of what the substantive programmes should and should not work.)
  -Looked around, this site (found nothing)
  -Used A Windows virus scan and it have nothing.
  Some system info:
  Processor: Intel (r) Core (TM) 2 Duo CPU T7700 @ 2.40 GHz (2 CPUs), ~2.4GHz
  Memory: 4096 MB RAM
  Computer name: HPMANIAC
  Manufacturer: Hewlett-Packard
  Model: HP Compaq 8510p
  Operating system: Windows 7 Ultimate 32-bit (6.1, Build 7600)
  BIOS: KBC Version 71.3
  I'm sure I left out something, but I really hope that this information will help someone to help me.
  This problem started to happen after a long time using my computer, usually even less time if I let my computer alone for a few minutes
  Now they will not disappear, and pulling up the Task Manager does nothing
  (Sorry for the typos, it got really a lot of time typing and correct what I have, caused my cursor keeps clicking and screwing up my typing)

  Reinstall the driver for the touchpad or mouse wireless drivers

• How can I change the length of a photo in iMovie? I can't drag the edge because the cursor is red.

  I have a problem in iMovie 10.1.2.  I can no longer select a photo and to extend its length, i.e. from 3 seconds to 4 seconds. My cursor is red and I can't return the normal cursor.

  Hi, jhskyline,

  To change the length (duration) of a photo in iMovie 10.1.1 (latest version), select the photo in the timeline panel, and then click the Info button in the toolbar at the top of your screen.  It is one that has an 'i' with a circle around it.   On the right, you will see a box of duration.  Type in the length you want and press return on your keyboard.

  Another way is to expand the line of time slightly with the cursor located above the timeline and right next to the settings button.  Then, you can select the photo and drag his edge to extend.

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• why I can't download and save the files to my laptop... it disappears in the air... I have windows vista and ie8... Please help I'm going crazy... this laptop is my tool work... thank you. __

  why I can't download and save the files to my laptop... it disappears in the air... I have windows vista and ie8... Please help I'm going crazy... this laptop is my work tool... Thank you.

  Hello locness2411,

  Have you checked your download folder? Also you can put where you want to save a file to the desktop as, for example. Take a look at these links: http://www.tweaklibrary.com/Software_Applications/Internet-Explorer/27/Set-default-download-path-of-Internet-Explorer/10153/ or http://www.windowsreference.com/internet-explorer/how-to-change-the-default-download-directory-for-internet-explorer/ that can help you in what you want to change. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• An individual emails in my Inbox are highlighted in red and I can't open. Why?

  This email of people comes in my Inbox highlighted in red and in the area where the unopened envelope should be is a red shield with a white cross in it.  Why?

  Hi Pipiri

   

  1. what email program are you using?
  2. using Windows Mail program that comes with Windows Vista?
  3. have you warnings of security with the mails?

  If you use a software of Windows Messaging, you can refer to the link below and check if the information provided allows-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-Vista-Windows-Mail/905f6123-f18f-4f6d-854B-a9d3f3dcdf6c

   

  I hope this helps.

• Microsoft Office Home and Student 2007 work stoppage.

  Microsoft Office Home and Student 2007 work stoppage.  The following code appears.

  Error 1402. Setup cannot open the registry key. Components of the unknown

  DA42BC89BF25F5BDOAF18C3B9B1A1EE8\00002119. Make sure you have the necessary permissions to access registry.

  Original disc of Microsoft Office can try to repair / reinstall.

  Repair does not work, same error message.

  Uninstall won't work don't, same error message.

  Add / delete won't work don't, same error message.

  Try using Windows to remove / uninstall the program, does not, same error message.

  Try to use the disk cleanup program to remove / uninstall the program won't work, same error message.

  Try to use the program for restoration of files, won't work, same error message.

  Try to use the file recovery, won't work, same error message.

  Attempt to return your computer to an earlier point of the set time, won't work, same error message.

  Try Microsoft Help, entered but rejected product identification code, offering instead of selling me the latest version of Microsoft Office Home and Student 2010

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;290301

  How to uninstall the suites Office 2003, Office 2007 or Office 2010 so I can't uninstall it from Control Panel?

  For questions of office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• IS IT TRUE THAT IF I BOUGHT A PRODUCT WITH A DISCOUNT STUDENT, HIS WORK STOPPAGE WHEN GRADUATE STUDENTS AND STOP BEING A STUDENT?

  IS IT TRUE THAT IF I BOUGHT A PRODUCT WITH A DISCOUNT STUDENT, HIS WORK STOPPAGE WHEN GRADUATE STUDENTS AND STOP BEING A STUDENT?

  If you want to just Photoshop CS6 Extended, you should be able to get it for $350 price of edu.  Call sales number in the link below or contact your reseller of Edu.  As reported in the link, it will not be updated and may not work on future operating systems. Adobe Camera Raw is stopped to 9.1.1 which means you will need Dng conversion on the camera models later. In short, it is a dog, and the latest permanent.

  Creative cloud now includes the features of Creative Suite Master Collection and Design Premium

  Adobe can only offer more and at least for me, the Plan of photography is a good deal for $120 a year annual commitment.

• I've updated my LR to CC and LR's work stoppage in my edition. Can you help me?

  I've updated my LR to CC and LR's work stoppage in my edition. Can you help me?

  • Please, go to the Windows, where Device Manager, expand display adapters.
  • Turn off the graphics card and open Lightroom, go to Lightroom preferences, then the performance tab, and then uncheck the option "use graphics processor.
  • Lightroom farm and go back to Device Manager and activate the graphic card.
  • Open Lightroom and then work in Lightroom and check if it works very well.

• When I stopped my project, in the program monitor window appears red and yellow bars... why

  When I stopped my project, in the program monitor window appears red and yellow bars... why?

  It is a problem with the captain to loosen then off material MPE.

  The next time you post a question: FAQ What information should I give...

• Why LR 6 gradient tool pull down in red and transparent?

  I just upgraded to LR 6 5.7 LR.   When I now use the gradient tool, the tool pulls down in red and transparent.  All cursors of the gradient tool are in position 0.  Color sliders are also 0.  I use a MacPro and had no problem with the LR 5 +.

  Looks like you have the overlay turned on mask.

  The box at the bottom of the screen or the Menu: overlay tool.

• I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab

• Downloaded creative cloud yesterday and worked perfectly, now it's inadmissible, why?

  I downloaded creative software cloud yesterday as a new client so I could download PS, ID, HAVE. The software seems to work fine and was very sensitive.

  I get to work today and the software is completely insensitive?

  • I tried to use the online administration console to download PS - nothing.
  • I tried to uninstall the software - nothing

  Help, please!

  Yes, that would be useful...

  I am running windows 7 business intel Core i7, on a 64 bit OS.

  The case is therefore:

  I talked to a technician of adobe systems, and we have disovered that although cloud bought mistake after mistake during the downloadig treat the program actually downloaded.

  We opened the program, and from there, I downloaded AI, Id, and PS. All right. I used the three programs and they work without a single hiccup...

  That is until this morning. I flip the computer on and it gets stuck on the start screen. I do a forced reboot and it told me to start in safety lock mode. Then found problems in which he says, cannot be fixed, please restart the computer. I followed his lead and the computer starts without a problem, any downloaded software is still there, opens and works as expected...

  I'm starting to think that my computer is fooled into thinking, there is a problem, but it is actually fake nother...?

• Why my cursor always indicates busy?

  Why my cursor always indicates busy?

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the number and the model of mouse you are using?

  ·        Is this a USB to PS2 Mouse mouse?

  ·        Is in any particular application or in general?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: I would say as update you the driver for the mouse and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: You can also try to put the computer to boot and then check if the problem is caused by any third-party application:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 link to restore the computer to a normal startup.