Why my design get cut?

Similar Questions

• Why my images gets cut off when I fall into the timeline?

  I saw my pictures and it looks fine, but when I drop it in the time line it cuts a lot

  Hi Duncananinthebrain,

  Seems that the sequence settings, you have chosen is not correct.

  Please, do a right-click on the item in the project Panel & click new sequence of the clip. Otherwise you can do drag & drop the clip in the project Panel to the "new article" icon.

  Try this & I hope it will work.

  Thank you

• I am trying to print a credit card statement, get cut.

  I am trying to print a credit card statement, but when I click on the icon to print, I get a gray rectangle dark on the top and the bottom of the overview page. When I printed the page, the top of the page and the six lines of the actual declaration get cut. This has never happened before, and I don't have this problem with Internet Explorer. Can someone please?

  Hi cielos9886138 ,

  I apologize for the inconvenience.

  Assuming that you have Acrobat installed on your computer, try following the steps:

  1 - Launch Acrobat > open the document > then click Print > select the option made under design & management of the Page and then click on print.

  

  Step 2 - If 1 does not work, try disabling protected mode, launch Acrobat > click Edit > then click on Preferences > under categories, click on (enhanced) protection > under the Protections of Sandbox, select Disable next to protected mode and then click OK.

  

• Photo gets cut even after using the 'right answer' to a similar question, attached photos

  Hello

  A picture has been inserted as fill with "fill level". "» When it is presented as a preview, the bottom gets cut.

  I followed the instructions in a previous post to adjust the size of the larger image, then use "horizontal mosaic."

  Photo that was cut was 765 x 1160

  I changed the picture of 991 x 1500 and is still making tiles AND cut.

  I spent so much time on it - please help.

  Here are 4 screenshots with descriptions. Thank you!

  It's my opinion of original design with scale to fill 765 image size x 1160

  

  This is preview with "Scale to fill" with the size of the image x 765 1160

  

  It is 'Horizontal mosaic' with the same size image used above, 765 x 1160

  

  So I increased the size of the image to 991 x 1500 with "horizontal mosaic." The sides are smaller, but it is always cut.

  I did not need to increase the width of others to complete tiled parts because it is cut anyway. I also tried to uncheck Sticky Footer without any result.

  

  Hello L,

  Please check the size of the container and also positioning:

  

  Kind regards

  Akshay

• Why do I get the name of the invalid anchor in muse adobe

  Why do I get the name of the invalid anchor in muse adobe

  Hello

  Could you please let us know the exact error message? You see it in the Preview design?

• Why do I get the message that I am running out of storage on my device when my storage icloud is practically empty?

  Why do I get the message that I am running out of storage on my device when my storage icloud is practically empty?

  It could be that your backup may be the cause.

  See if that helps - manage your iCloud - Apple Support storage space

• Why do I get "installers" added randomly to my process?

  I have an early 2009 iMac 24 inch.  I installed el Capitan, and about a month later, I had performance problems.  I downloaded memory clean and discovered that I was running out of RAM. So, I added 4 gigabytes of ram for a total of 8 GB.  But I still occasionally issues, ending up with about 400 MB of RAM even with the 8 GB.  I looked at my process in Activity Monitor and discovered several "installers" taking up many gigs of memory processor. I left these processes, but every day or so, another "heating" is displayed. Given that I keep clean memory and open activity monitor, I left these process and I am very well.  The question is why do I get these installers added to the memory of my processor?

  Hi jeffh212,

  Thank you for using communities of Apple Support. Based on what you said, it seems that you have found processes that start running their own, you will need to close.
  There are a few ways this can happen. I would recommend read you these articles, they explain how you can disable some elements of opening and see if the process of return.

  OS X El Capitan: items open automatically when you connect

  Another thing you can do is to start in safe mode to disable all elements of connection and putting into service, if the problem persists.
  Try safe mode if your Mac does not end commissioning - Apple Support

  See you soon.

• Why do I get message not delivered on my SMS

  Why do I get message not delivered on my SMS

  Because they were not delivered for some reason any!

  Make sure that you connect to your cellular network (if you are using SMS), and that you have a data connection as well (if you use iMessage).

  In addition, call the intended recipient and ask that they check the same.

  You can also turn off and on your phone.

  Then test some messages.

• Why do I get "Message Agent wants to use the"login"keychain and how to stop it and 7 other bunch of connection."

  Why do I get "Message Agent wants to use Keychain 'login' and how to stop it and 7 other bunch of connection points most every time I login?

  Hey Roman man,

  I understand that you see a prompt for your login keychain. I can't anymore how do I fix this.

  Now if you have recently changed your password for your Mac, then the password for your keychain will need to be updated. You can make this change in the Keychain Access application. If you do not know the password, then you need to reset the password in the keychain. Take a look at the article below for specific details get this sorted out.

  If your Mac keeps asking for the password in the keychain
  https://support.Apple.com/en-us/HT201609

  Take it easy

• Why do I get restore window when opening firefox since the update

  Why do I get restore window when opening firefox since the update. I don't want to restore but it appears every time instead of my homepage as shown

  A likely cause is that you first close all Firefox Windows and then close the Firefox application.

  Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

  • Bug 845681 - close all windows and abandonment of Firefox eventually led to about: sessionrestore to appear the next time you start

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• I have windows 7 and mozilla firefox browser why do I get breaking photo when I log on the bingo site

  I have windows 7 mozilla firefox browser why can I get a picture of the game im playing skinning and slow when I log on a bingo site

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  See:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• I get a message that I don't have the latest version of Firefox. I just updated and downloaded the Beta Version 11. Why do I get this message?

  I get a message that I don't have the latest version of Firefox. I just updated and downloaded the Beta Version 11. Why do I get this message?

  The current beta version is 12 of Firefox, but if you're not a tester experienced, so it is best to stay with the current version of Firefox and uninstall the beta version.

  You can find the latest version of Firefox in all languages and for all systems operating here:

  • Firefox 11.0.x: http://www.mozilla.org/en-US/firefox/all.html

• Why do I get problems with the challenges of poker Facebook poker?

  Why do I get problems with the challenges on facebook poker? have reloaded JAVA.didn't work

  URL of affected sites

  http://

  I'm not sure what that requires the application of poker, but perhaps solutions in the article of problems with some Facebook games, cat and more will help

• 2016 iMac, purchase decision: why I'd get a 2 TB vs 1 TB disc fusion? What type of use requires a 2 TB with vs 128 GB 1 TB 24 GB flash version?

  2016 iMac, purchase decision: why I'd get a 2 TB vs 1 TB disc fusion? What type of use requires a 2 TB with vs 128 GB 1 TB 24 GB flash version?

  At first, we thought they were SSDS but learned that they are only partial. It really takes the extra storage space and our practices are mainly applications to business and other things like google earth, photos, the light using google sketchup etc. To know we are not the players or the designers. However, we do tend to keep our computers for a long time. We still have our 11 year old iMac. Are there benefits hidden suspension for the 2 TB drive that we regret or should stick us to the 1 TB version?  If we were to get a 2 TB we would notice even the difference account required to our practice?

  It depends in part on the total amount of storage you need. One way to help determine which would be to analyze how much space you use on your current iMac. I currently have a MacBook Air, which has only 128 GB of total storage (all the flash) and it's big enough for me (though I'm not typical) and I really enjoy his performance. If I was in the market for an iMac, I'd be buying the 256 GB flash storage option - but I don't need total storage space. The information below from the link "how much storage is good for you" in the http://www.apple.com/shop/buy-mac/imac?product=MK442LL/A & step = config

  can help

  Flash storage

  Flash storage offers significantly improved compared to a traditional hard drive - performance speed you will notice when you start your iMac, launch an application or browse your photo library. Storage Flash also uses no moving parts, so it works silently. For maximum performance, you can configure up to 512 GB of memory flash on the iMac 21.5 inches or up to 1 TB on the iMac 27 inches.

  Fusion drive

  Fusion drive handset storage quick flash with a large hard drive. OS X intelligently manages what goes where, using the Flash for files you access frequently and keep the rest of your digital life to the larger hard drive. Over time, the system learns how you work, so it suits the Fusion drive management view for work best for you. You can choose a Fusion drive up to 2 TB on the 21.5-inch iMac, and up to 3 TB on the iMac 27 inches.

  Merge to disk 1 pairs of a hard disk of 1 TB with 24 GB of quick flash - enough to store files of OS X and applications in order to ensure a quick start, near wake instant sleep and quick application launch, with room remains for the most frequently used files and important applications. 2 to and 3 to pair of Fusion results in a hard drive more than 128GB of quick flash storage, offering even more space for your most frequently from the files used. For best performance, systems iMac with 32 GB of memory must be configured with a 2 to big merger or any flash storage.

• I've already converted to Skype, so why do I get messages to do?

  I've already converted to Skype, so why do I get messages to do? I already have the latest version of Skype. Can't tell you when someone has already converted to Skype?

  Contact customer service

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.