Why my files on SkyDrive will not open in Word?

Similar Questions

• Windows 8 Photos App, calendar, messaging, and SkyDrive will not open

  Windows 8 App Photos opens and closes immediately if started from subway tile interface.

  If I try to open any picture or video with the Photos App, I get the message:
  "Windows cannot access the specified device, path or file.  You will not have the appropriate
  permissions to access the item.
  Other image programs work (Paint, Windows Media Player, Windows Photo Viewer, etc..) and can display the pictures and videos.
  While troubleshooting the problem, I have tried several things and noticed some other applications of Windows 8 also not open, including calendar, messaging and applications SkyDrive also do not open (they try to open and close immediately).
  It's on a new installation of Windows 8, which replaced a Windows 7 installation, with nothing recorded, from a SSD drive.  Everything seemed to work so I started to install software and data, when I noticed the problem with the Photos App.  I installed Windows Media Center, Office 2010, Kaspersky Internet Security 2013 and some small programs and applications.
  When it is started in safe mode, open the Photos App produces the following message is displayed:
  "This application cannot open.
  Photos can not be opened by using the built-in Administrator account. Sign in with a different account, and try again. »
  (solution of http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/windows-8-photo-app-wont-open/c22d8cc0-ae9d-45fd-9662-37b10ad3db9d?msgId=15876c1a-5949-44b0-8d3a-584426c330a0)
  My screen resolution is 1920 x 1080.
  I tried to launch apps.diagcab and AppsDiagnostic.diagcab, such as recommended in this community.  Following the recommendations it reboot solved the problem, but returned to default after a second reboot.
  I have tried to update the application, sync the app license, but not even reinstall according to the recommendations of
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
  I tried without success to the following:

  Restore access to the folder containing the photos to the help

  ICACLS PATH/Reset/t

  (from http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/d687c390-30cc-499d-9cbf-6afd4e9210cc#1ce056f1-9840-4bda-9ae7-c3517f115784)

  I'm open to ideas.
  -Brant

  This behavior has emerged in the last days and the problem is that Kaspersky has marked these apps as "not reliable."

  Solution:

  (1) open the 'Applications updates' section of Kaspersky Security Intrernet. A new window will open.

  (2) in the dropdown in the top left corner, select 'all '.

  (3) in the search box of the appearance of the upper right corner (the one with the magnifying glass) to Skydrive, calendar, Chat, or any other application does not.

  (4) 'files' (with extension *.html and a few others) will appear. These files will be marked with a red circle and the text 'Not reliable' (or something similar) or with a yellow circle and the text 'Minimum restricted' (or something similar)

  (5) select with the mouse each of these files (one by one) that appeared in your search and press the secondary button. A new menu will appear with the option "move group". Inside this option, you need to tell the program that you want to move each of these files to the Group of "reliable." A few seconds later, you will see how the red circle turns green.

  (6) run your mosaic application. It should work perfectly.

  Kind regards.

• File Animate edge will not open!

  I was almost finished with my animation and suddenly the EDGE crashed and now the project file will not open. Gives me an error of C++. Help, please!

  Check out my tutorial on how to recover files. I hope it works for you!

  How to fix corrupted files EA - Tutorial #3

  Let me know.

• Raw files Nikon D500 will not open with CS6 (updated). Solution?

  I've updated the plugin raw and noted that Nikon D500 (NEF files) are supported but they still not open or even to produce thumbnails. No phone support available for Photoshop CS6 then how to get help?

  delo69 wrote:

  I tried several times and it says that it cannot read the NEF files.

  What is the exact error message?

  If it's something like "the file could not be read", it means generally that you do not have the appropriate permissions on the file that you are importing to. be sure that you have permissions to read and write on the folder.

  Alternatively, you can import to another folder where you do not have the necessary permissions.

• __Undo "open as" as now all the files (and programs) will not open and the icon changed in the open air in the program.

  Do not uncheck the function "open as" to open files and programs.  I have here a way to return to original icons for the files.  This happened a week ago.  Cannot open any file or explore any original icon does not work, only the clicked program.  Can find no place to remove or cancel this operation.  Remedies, trhanks.

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• file extensions will not open

  Some extensions of file, like .ged, will not open on my computer.  Is there a way to fix this?

  Elevlyn,

  Thanks to fully explain the situation. Now, I suggest you try it. reader of GOL.

  (1) make a backup of your file on-line.

  (2) download the reader and run an anti-virus program before running the Setup.

  (3) drive test

  (4) Please report the progress. Which drive OK?

• MX will not open some .fla files

  I have two HDs in my XP system.
  Drive 0 has been divided as C: and D:
  Disc 1 is E:
  
  All my .fla files were on E:
  
  Then I repartitioned 0 c: drive and reinstalled XP, Flash MX and all software.
  
  Thus the E: drive (where are all the .fla files) is now D:
  
  Most of these great open .fla files, but some will not open and crash Flash MX.
  
  What are possible reasons that SOME files will not open?
  
  I can only assume that these files are who need resources which cannot be now available. Fonts? Components?
  
  I have seven projects in different folders on the same drive.
  Each folder contains many progressive each project stops as it was developed.
  The files of all the projects except one are very good.
  But ALL the files in a folder does not open.
  I don't see how only that a project might have been corrupted.
  More likely that the environment of operating system or Application is now somewhat different than before - in a way that does not conform to the needs of this particular project.
  
  Thank you!

  Answer found!
  Don't have QuickTime installed, including the files apparently needed.

• Why CS4 will not open DNG files converted from raw Olympus E - M1 files?

  For several years, I was able to use the DNG Converter to convert. My E - M1 Olympus ORF raw files and then open them for treatment in CS4. Suddenly CS4 quit recognizing these DNG files saying "Photoshop could not complete your request because Photoshop does not recognize this type of file"

  I have not changed preferences. I use E - M1 v3.0, DNG Converter v8.3.0.141 on a Mac. I deleted the converter DNG several times, even reinstalled an earlier version, but nothing does not change.

  However, CS4 will open the converted DNG files from Pentax raw. PEF files of my K-5. Weird. This is the Olympus raw DNG conversions that will not open.

  I can view the DNG files converted into question in the preview of the Mac just fine, but CS4. Any ideas will be appreciated.

  Don't forget the compatibility of the DNG Converter is defined to provide support for your version of ACR:

  

  Benjamin

• Why the html file that I downloaded from the internet will not open in Dreamweaver?

  I tested other pages to index and their linked pages and they opened in Dreamweaver.  I applied the same steps to this file, but it still not open.  All of this linked pages / index associated is open in Dreamweaver, but not the index page itself.  When I double click on the index.html file, it opens in the browser and the links work.  If the file is damaged in any way can it be repaired?  I checked the index.css file, but I see nothing wrong with it yet.  Can the html or css file contain code that prevents the files open in Dreamweaver, and yet still be opened in a browser?

  Of course, you have all the support files.

  Nancy O.

• my itunes will not open and there is a pop up that rpet ' cannot read itunes library .itl file ' '.

  For some reason any my itunes will not open and there is a pop up that keeps saying "cannot read the itunes library .itl file ' and I don't know why it keeps coming back." Anyone know?

  Hi natalieribeiro,

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  http://support.Apple.com/kb/TS1717

  http://support.Apple.com/kb/HT1923

  Method 2: Perform one perform a clean boot to see if there is any software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  If the problem persists, contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

• Photoshop CS6 will not open the file image (.jpg, .dng and .cr2)

  Hello

  I recently reinstalled my laptop (64-bit) Windows 7 Pro. It has all the necessary Windows updates.

  I installed Photoshop CS6 (64 and 32-bit) and I've installed all the updates it needs.

  It will not open any JPG or RAW, .tif, .jpg, .dng and .cr2 files. Before you reinstall Windows Photoshop worked well.

  When I try to open an image file that Photoshop does not open, so the file type is associated with Photoshop, but that's all. The software is running, but it won't open the jpg or tif, and it does not open Camera Raw to display the RAW file.

  If I double-click on a new image, then a new instance of Photoshop is open, in addition to the already open instance, but still no picture.

  If I click file-open and navigate to the file it will then open in Photoshop and Camera Raw 9.1.1 and the picture shows successfully.

  Strange!

  The only thing I think currently, is that I have 2 partitions on the laptop, with C: and a D: readers, with the users folder, which is held on D. Photoshop is confused by there? Well it is exactly how the laptop has always been in place, and it was already defined in this way before Photoshop has been installed.

  I tried to uninstall and reinstall. I tried to install just Photoshop 64 Bit, not 32 bit (I don't really know why I get the two offered, to be honest.)

  I am now lost and would like to receive helpful suggestions!

  I "solved" this problem!

  It seems that Photoshop won't open these files from a Windows 7 'Library' that points to a redirected folder.

  However, if I create a mapped drive with a drive letter local, the actual path of the files, (for example \\Server\FolderRedirections\Michael\Pictures), then it works OK.

  It is a good work-round and it makes no difference to me if I use a mapped drive or library I put just one correct, in the section 'Favorites' from Windows Explorer.

  Thanks for the suggestions guys, that helped me a lot. I hope this answer helps someone else, even if my situation may not be a common scenario.

• I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  See the faq for the compatibility of ACR:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Your camera would need ACR version 9 which is not supported by 12 elements.

  You can:

  -upgrade to 13 items, with updates of version 13.1.1

  - or use the free DNGconverter mentionned in the links at the bottom of this faq. You'll be able set of entire folders to convert your raw files to DNG PSE12 can read and modify.

• 13 elements will not open Nikon d750 raw files

  13 elements will not open Nikon d750 camera raw files, will not be updated or the other in the menu help, any ideas what to do.

  Hi, ATR, just for you say, my firewall etc is managed by software Norton anti-virus, the reason why I could not update was the firewall, entered the firewall of windows 8 and found a facility to allow applications through firewall he, Adobe was not one of them, so I just added 13 elements Adobe and hey presto it allowed me to do all the necessary updates , I now camera raw 8.7 update on 13 items.

  Thanks again, ATR.

  Darryl.

• Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.

  Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.
  A message appears on the iphone asks you to trust the computer it is attached (mac pro 10.10.5)

  You type 'Confidence' and nothing happens. the photos on mac app publishes this message.

  This Mac not yet have been granted access to the media on 'my iPhone '. To import media to this Mac, press 'Trust' on 'my iPhone '. You must first unlock the device.

  This actually solved for me after going to settings, General, reset, reset the location and privacy... and then plug in the unit and pressing the trust... hope that works for others.

• Word 2011 will not open docx file created under Windows

  Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.

  No problem when I create a new file and re-open it. Can anyone help?

  I don't know that someone on the Microsoft forums can give you some useful tips.