Why my firewall turning

Similar Questions

• I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

  If you date something on it so that it remains not.

  I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  Hey Roscoe,

  If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

  For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

  I hope this helps.

  Good luck!

• Windows Firewall turns off automatically.

  Windows Firewall turns off automatically at startup, sometimes. I use Trend Micro Internet Security and Windows Security Center. They both have a firewall. (1) I always here you can only have one firewall at the time, is why that Windows Firewall turns off sometimes? (2) if so, why only sometimes? (I don't have Windows OneCare.) (3) should I manually turn off the Windows Firewall and just use the Trend Micro firewall? (4) that I will protect? Please answer 4 questions.

  I'm sorry, I wasn't clear enough in my question. I'm not asking for possibly a recommendation on what AV I have to use. I know not if I have to choose only one I'll choose Trend Micro. I wanted to ask what is the right way to turn off the Windows Firewall and make sure it stays off. When I open the Windows Security Center it shows firewall as YOU, but she does not have an option to OFF.

  Start button > in the search box, type windows firewall > look up, click onWindows Firewall > in the left column, click turn on or off Windows Firewall > the rest is self-explanatory.

  t-4-2

• Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

  Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

  Just what do slow down? Rotation beach balls?

  Run and view the results here so that we know more about your configuration.

  http://etrecheck.com/

  EtreCheck

  https://discussions.Apple.com/docs/doc-6172

• Why my iMessages turn into SMS

  Why my iMessages turn into SMS

  Hi Rugman304,

  Thank you for your question in Apple Support communities. I use my iPhone all the time and are based on the ability to send an iMessages. I will be happy to provide you with some information for you on this issue.

  The first thing I recommend is to restart your iPhone. A simple restart is very beneficial for the performance of the iPhone. Then, you do not want to follow the steps described in this article:

  If you can't send or receive messages on your iPhone, iPad or iPod touch

  Have a great weekend!

• Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  I changed the subject: config to make the rotation gesture to move between tabs and it worked great for well over a year. It now behaves properly, as described here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=877598

  It used to be very controllable move a tab on, now it is erratic and moves quickly and the unexpected tabs regardless of the slowness, I do the gesture of rotation. It's the main reason I use Firefox on Chrome and I will continue to do so unless there is no solution for this.

  Just put the browser.gesture.twist.threshold to something around 15-25.

• Firewall turns off after Windows XP starts

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Please update a single thread... http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-XP-firewall-turn-off/394cce83-4ca8-4b47-b113-0cb59adf2da9

• Windows Firewall turns is not on.

  I just was struck with a virus attack that turns off Microsoft Security Essentials and Windows Firewall, which makes it difficult to get rid of as neither would then switch on - delicate little * a virus. So I did a scan with Malwarebytes, which seems to have caught the virus (it found & removed 10 infections - although I never copied the names that could be useful) and I then uninstalled/reinstalled Microsoft Security Essentialls, which now seems to work. The problem is that when I open the Security Center and try to turn on the firewall, I get an error message saying "Due to an unidentified problem Windows can not display the firewall settings." How I solve this problem and get the firewall turned on?

  Try this.

  http://www.ehow.com/how-does_4830704_reinstalling-firewall-Windows-XP.html

• Why after I turned off the computer num chance works also

  Please can you help me fix my computer

  Could you try that again once please, no information is here so I can't help you.

  'Why once I turned off the computer... also numlock works' looks that separate the 2 points, so could you please develop and provide more information.

  How to ask a question:

  http://support.Microsoft.com/kb/555375

• Why can't turn off password protected sharing

  Why can't turn off password protected sharing?  I use a Vista SP2 64-bit computer.  When I try to turn it off, I uncheck the button but when I click on the app it changes again to on.  I googled this question and tried many solutions, but so far nothing has worked.

  I am connected to a home network.

  I tried to delete the guest account, enabled the guest account and set up a password for the guest account, which none helped.  I am alo tried to change the IPsec to the manual.  Finally, what makes the work was when I got to a page that seized me add an Everyone permissions. I don't remember how I arrived at this page, but after that I added the new authorization and returned to the page network and sharing, password protected sharing was turned off.

  Thank you for your help.

• Windows Firewall turns off after a reboot

  Original title: Windows Firewall...

  I put my windows firewall on. When I restart my computer it is turned off, do I need to put it whenever I log on my computer?

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  I suggest you follow the steps proposed by Azam K in the following link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Security/Windows-Firewall-turn-off-every-time-i-restart-my/2c7479fa-0dd0-4175-bfb9-212b86fc90f4

  I hope this helps.

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Why when I turn on my Mac, the InDesign program open at the same time?

  New problem on my Mac. Why when I turn on my Mac, the CC InDesign program open at the same time? Absently, I probably activated something in the program! Can someone tell me how to disable this feature in Indesign? Thks for helping me!

  Go to System Preferences > users & groups > login items. If InDesign is there, just delete.

• Why my graphics turn black on export to PDF?

  Why my graphics turn black on export to PDF? The color photographs are in color. I use Blurb Book Creator plugin.

  How you are viewing these PDF files? Tip: Preview of Apple is not what you

  should use.

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian