Why my text layers are turning to the jibberish?

Similar Questions

• Why my text layers are not made? Text makes RAM Preview

  I have a 2D moderately complex composition in 2014 EI, using several Adobe Illustrator files and nested compositions that make it very well.

  I can also preview the composition perfectly RAM Preview (about 25 seconds of it anyway).

  The problem starts when I try to add the composition to the render queue. Everything except text layers make it very well, but the type is absent (these are native text AE layers, not any type).

  I have had no success, the research of the Creative Cow and Adobe user groups. All layers are visible with the 'eyes' on, and I do not use the 3D settings.

  Render settings are best settings, Lossless, but I played with different parameters and get the same results.

  I'm on an old MacBook Pro running OS 10.7.5

  Please help, thanks.

  Model name: MacBook Pro

  Model ID: MacBookPro5, 2

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 6 MB

  Memory: 8 GB

  Bus speed: 1.07 GHz

  Your text layers are defined as a Guide layers?

• Text glow effect disappears when the layers are placed in the text layer. Need help!

  Whenever I have add a layer of white or a white shape under my text layer, the glow on the text layer will show is no longer.  I can't get the glow on the text appears on a transparent background. I use Photoshop in CS3.

  Glow in the first photo, no glow in the second when white layer under the text layer.

  

  

  Hello

  Default Outter Glow has the screen as it has blend mode. on a white background, you need to change to a different mix (normal color, more dark, multiply, or whatever you prefer, experience with some doubt)

  I suggest leaving the white background on all tweaking and if you need output, turn off the white layer before saving transparent

  Please post if this does not resolve the problem for you

  

• Emails are turned to the trash

  From time to time, some of my emails are converted to code what looks like.

  There is no particular pattern as to when it arrives or the type of information in the email, some have attachments, some are just text. If the email has attachment image "garbage" that results can be a very long list.

  Can I retrieve emails and stop what is happening?

  Could be file corruption. Right-click on the folder of the problem, and then select Properties. Then the Repair folder.
  Be prepared to lose messages if the corruption is too bad.

  How to prevent? Maintain the system to send an email
  http://KB.mozillazine.org/Keep_it_working_%28Thunderbird%29

• I have a disc of photos that are turned to the side and I want that they portrait. How can I do that for all of the disk?

  I'm a model and the photographer gave me the pictures of the shooting on a disc with the release form. The problem is when I went to open the pictures they are all turned sideways and he wrote a 'read only' and unable to change! Is there a way that I can see without turning my head to the side?

  Thank you!

  Files on a CD or a DVD should be read only... you tried to copy
  the pictures in a folder on your hard drive?

  Place the disc in your optical drive and go... Start / computer...

  Right-click on the drive letter for the drive that the disk is located, and choose... Open or explore...

  Open the folders on the drive and find pictures.

  Reach... Edition / select all... Edition / copy.

  Create a new folder in your pictures folder.

  Right-click on the new folder and choose Paste.

  Open the new folder, and then go to... Edition / select all.

  Right-click on the selected (highlighted) group and in the menu... Choose...
  Properties / General tab... Uncheck (clear) the read-only box / apply / OK.

  Right-click on the selected (highlighted) group and from the menu choose...
  Turn clockwise or counterclockwise.

• Textfield to switch text display are dynamically with the html editor

  Hello
  
  I have a page element that the user can type in. Sometimes
  the user would rather have html editor but sometimes
  It is a text box so that they can type in the text
  explicitly with the html tags.
  Is it possible to have a button to switch
  the display type of textfield to text are with the editor html on the fly? Thank you.
  
  Suni

  Suni,

  If you don't mind submit page, you can then use conditional logic. Add two elements to the form: point of selection, the text box, HTML editor. Use the selection element to allow the end user to choose, then use the attribute conditional display of each item to show/hide the.

  You could do this with JavaScript, but it will take more work.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen
  http://sourceforge.NET/projects/plrecur

  You can reward this answer by marking as being useful or correct ;-)

• text controls are missing from the Inspector in FCP, i.e. the size of font etc.

  I can't to increase or decrease the size of any font that I want. As well as all other regular options, help please

  What title is it? Why can't you change it? What is going on? Post a screenshot of what you see.

• Trying to iCloud iPhone backup 6 + and tried to 'Cancel backup' now the wheels are turning and the screen is frozen. How can I stop?

  Looking for a backup initiated from my iPhone 6 s +.  Needed to leave before it's over, so I typed "cancel backup' which doesn't seem to work.  Six hours later the wheels always turn around. Message on the screen said "Turning on Backup" - it turns also around and the screen seems frozen I can't return to set after I selected "iCloud" How can I fix it?

  Have you tried to restart the phone.

• Why my desktop settings are changed at the next logon?

  I'm on a domain.  Our use of Office XP SP3 PC.  My phone has recently been reinstalled with the same OS.  I'm supposed to have some local privileges on my laptop, but I don't know how to check this.

  My network administrator says we do not have a group policy that forces the desktop settings default to the XP defaults during the connection, however, is what happens whenever I had to log on to my laptop using the domain credentials.  Someone at - it suggestions?

  Thank you

  The quick way to verify that you have administrator privileges is to right click on "start".  If you have administrator privileges, one of the options that are displayed will be "Open All Users".

  Your symptoms are typical of a corrupted profile.  When you try to open a session and Windows detects that the user profile is corrupted, it creates a temporary user again, profile and use it for this session.  When you disconnect, the temporary profile goes away and the next time you connect, you get an entirely new temporary profile that resembles the standard first time login screen.  You'll probably notice that it's only a problem for a single user.  Other users will not have this problem.  To fix, simply follow one of the following procedures:

  Since you are on a domain, the fastest way to recover is to restore your registry (including your profile) from a backup by using the system restore.  We assume that it is a new problem and a restore point is at the time when it wasn't a problem.

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  If this does not work or if you do not have the necessary restore points, follow one of the following procedures.  Since you are on a domain, you may need to do this twice - once to copy your profile to a local user profile, and then delete your corrupt domain profile, and then re - create your connection of field profile and copy the data back.

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• videos and images are turning to the left upper corner of the screen

  can someone tell me how to solve the problem?   Videos and commercial images flashing in the upper left corner of my screen to the place where they are supposed to be.  But the controls for videos, play/pause, volume, etc. are in the empty box where the video is meant to be.

  Hello

  Check the following if you use IE9.

  Open windows control panel, open Internet Options and click the Advanced tab.  Under the graphic acceleration, make sure you there is not a tick against 'use made instead of GPU Rendering software.  If it is, uncheck the box and click on apply to save the change.  Restart IE.

  If the above doesn't help (or does not), download the latest installer of Flash Player and save it to your desktop.  Then, close all browsers, open windows control panel, open programs and features and uninstall Flash Player, if it is displayed here.  Once completed, restart the PC.  Now, double-click on the Setup program on your desktop to reinstall Flash Player.

  Another option is to download and install Firefox as a temporary measure, as the latest version of Adobe Flash seems to work OK with that - you may need to run the installer of Flash again after installing Firefox.

  Kind regards

  DP - K

• Illustrator layers are extended at the opening.

  I didn't get much luck Googling, because I am not sure of the terminology appropriate to ask the question.

  When I open a file, one or more layer are opened/expanded in the tab layer on the side of the screen.  I can close the layer, make changes, and save; but when I open it upwards, the layer is always open.

  This does not happen with all the files.  But on files that do not have this, it's always like that.

  Any ideas? It has boring rathe, especially with files more art.

  This problem is resolved in 17.1 update released for Illustrator CC

  Simart

  Illustrator team

• Enregistrer to save in PDF, keeps all the text layers

  I am trying to save a file in Photoshop CS5 in PDF, it works for the most part well, only problem is that not all text layers are kept as selectable text in the PDF file.  I initially tried the rescue of the PES with this result, I thought that perhaps Photoshop CS5 would do a better job.  Unfortunately, same results.

  I don't know if text only is passed as text in the PDF file, I get quality really incoherent text to the printer.

  Advice on potential problems in the work that could lead to convverted text layers in the file PDF is not properly?

  
  Thank you

  
  Mark

  PS, I did an extensive web and knowledge base, research before you post and can't find anything useful.

  Found the solution!

  The problem was with any text layer styles 'false '.  It's bold and italic applied as a style rather than use the specific style of the font family font.   After removing all the beautifully converted file false character styles to PDF retaining all as selectable text and printing is high resolution vector text.

  I want to thank Print New Hampshire that took long hours this investigation until they found the solution for us.

  link removed>

• How layer comps are linked to the layers in the PSD file?

  I am developing an application of external command line c ++ to analyze a PSD file (using the PSD specification - http://www.adobe.com/devnet-apps/photoshop/fileformatashtml/PhotoshopFileFormats.htm#50577 409_17115) in order to extract important information. One of the main things I need is information linking layers to the layers themselves. Digging through the section Image resource specifying "Layers - 1065" I'm only able to extract the name, comments, etc. on the comp. layer is the question I have: how the layers are referenced by the layers in the PSD file? I need to know what layers are applied to each layer comp. Looking through the scripts provided with the PS (for example layers in files), the composition of layers is always "applied" before watching to see what are the layers inside this model. It seems to be the creation of an Action and the implementation of this action with the class identifier of the layer comp before watching his diapers, so this method should know on which layers are referred to by this layer comp. Specifically, what do I need to be able to do and, so far, have failed.

  It is important that I stick with c ++ & that it be an external application, so the Plugin SDK is not much help here.

  I would really appreciate any ideas/suggestions on this subject.

  Thank you all.

  If someone falls on this issue once again, last night, I found the data using a control of the layer comp binary ID I have model layer section. The composition of layers--> data layer is inside a section of "undocumented"data under the tag Layer Records: shmd

  Hope this helps someone.

  TREV-

• Script text layers

  Hey ho,

  Basically what I'm hoping to do is proof a document of the fool.

  I have a template saved, which opens, as published in the need - it's text layers, I'm more concerned about here.

  The other guys in the laboratory of evil to use windows so much Photoshop, so I'm hoping to write a script that can change the text inside of a several layers of existing text, then save an action to open a script and put actions button mode - do not confuse the cavemen.

  I hope to have a pop up entry field, and entries must change the text within the specified layers. Nothing in the text should change (font, Style, color etc...). I think that altogether there are 8 layers, in which the text should be changed from the opening.

  any input would be much appreciated guys,

  see you soon

  In this example, text layers are identified by a name ad must be at the top level.

  // 2014, use it at your own risk;
  #target photoshop
  ////////////////////////////////////
  if (app.documents.length > 0) {
  var myDocument = app.activeDocument;
  //////////////////////////////////////////
  ////// create dialog for customer-entry //////
  var dlg = new Window('dialog', "Enter the texts", [500,300,820,850]);
  dlg.textA = dlg.add('edittext', [12,15,308,35], "", {multiline:false});
  dlg.textA.active = true;
  dlg.textB = dlg.add('edittext', [12,45,308,65], "", {multiline:false});
  //////////////////////////////
  // build- and cancel-button;
  dlg.buildBtn = dlg.add('button', [168,470,307,500], 'OK', {name:'ok'});
  dlg.cancelBtn = dlg.add('button', [13,470,153,500], 'Cancel', {name:'cancel'});
  dlg.center();
  var myReturn = dlg.show ();
  // check fpr availability of the used fonts;
  if (myReturn == true) {
  replaceTheText (myDocument.layers.getByName("text1"), dlg.textA.text);
  replaceTheText (myDocument.layers.getByName("text2"), dlg.textB.text);
  };
  };
  //////////////////////////////
  function replaceTheText (theLayer, theString) {
  theLayer.textItem.contents = theString
  };
  

  Edit: And there are opportunities for something to go wrong there indeed.

  So we can hope for the best, wrap perhaps problematic things in try-clauses or include controls.

• Printers under the original user have the printer properties grayed out for new users, even if they are members of the Administrators group

  Windows 7 Pro 64 bit (and 32-bit) Setup on the domain.
  The domain users group is added to the local Administrators group.
  Printers are installed under the first domain user.  These aren't the printers shared, but local usb printers or printers attached to the tcpip port and driver installed.
  All right.
  Users in the second domain is connected to the computer.  They are part of the local Administrators group, because they are part of the domain users group.
  They're going to look at the properties of the printer and almost everything is grayed out.
  Why?  Because they are part of the local Administrators group, they should not have full access?
  I look at security for printers and I don't see the first person in the list because it was created with their profile, but I also see local administrators that this new user belongs to a group.  Now I can take everyone and increase the rights and then log in as a new person and they can then change the properties, but why can't new users "who are admins the" does not alter the properties?
  Thanks in advance for your help.

  Hi Gsaunders,

  If the computer is connected to the domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.