Why the stop(); function interferes with another function?

Similar Questions

• The OSMF will support the STOP function?

  Good day, everyone!
  Puzzle:
  With respect to the basic function of the media player, OSMF, the STOP function will consider in the future?
  If so, there will be a new feature added in the org.osmf.traits package. Is it fair?
  If this is not the case, how can we implement the STOP function in the current framework of the media?

  You you give me some advice?
  Thank you!

  That's exactly how we implemented the stop() on MediaPlayer method: a pause() methods followed by a seek (0).

• HP e190i: why hp stopped DVI cables with e190i models of shipping?

  Hello

  We have just a fresh delivery of 30 x monitors HP E19Oi. Why HP stopped their expedition with DVI cables? They always used to but sudenly stopped. Clues behind this? They come with VGA Display port and USB cables but not DVI. Just annoying when you used when installing the moniotrs on PC

  Datasheet, on page 2, indicates that the DVI to DVI cable is an accessory, not an included element.

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/E190i-datasheet.PDF

  It is, unfortunately, likely to be also good answer you get.

  We have no influence on what the biggest manufacturer of consumer and the Enyterprise of the pc on the planet decided to join its desktop pc and laptop.

• message error "the file is associated with another photo in the catalog.

  CC of LR, windows, photos on external hard drive

  Files that I was still using yesterday now are more connected to the catalog.  Try to locate the files I get the message "the file is associated with another photo in the catalog. How can I find and solve.

  Thank you

  This is because this same image, same time date and time of the device, is already in the catalog using a different file name.

  Conversely having not happening again is to STOP Renaming files on import or manually in the file manager or with another image, software.

  Each camera has a system that can be customized if necessary if you have 2 cameras of the same brand and model of separate file naming. And even then, they are separated by the serial number of each camera.

• Why the prores files original with stereo tracks into first on the single audio track?

  Why the Prores files original with stereo tracks into first on the single audio track?

  Here are a few ways.

  Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

• Why the DLL function performed by call library node fails when the Vi is reopened?

  Development system

  OS: Windows XP

  LabVIEW: version 10.0

  DLL: Custom

  Compiler: Visual C++ 6.0

  Function prototype: __declspec (dllexport) const char * test (void)

  We have developed a DLL to use.  Compile the DLL itself.  The DLL includes a function test.  The test function validates the functional capabilities of the DLL.  I followed the examples online, and I used the tool to import shared library in LabVIEW.  The screw created use the call library node.

  When I create a VI by calling the function in the DLL test customized by using the call library node the VI runs the test DLL function flawlessly.  I close the VI.  When I re - open the VI and run it, I get an error code of the DLL.  However, if I go on the schema and define the path of the DLL in the library call Configuration node once again the VI then runs the test DLL function perfectly again.

  I have set the path of the DLL in the library call Configuration node everytime I open the VI.  The examples that I downloaded from the community don't require this.  What could be the missing DLL?  What Miss me?

  I solved the problem.

  I had create the DLL by using the following steps for VC 6.0:

  1. new project

  2. Select the Appwizard (DLL) MFC

  3. Select the regular DLLS using the MFC shared DLLS

  4 Yes for source file comments

  5 finishing

  The DLL must be on the VI search path.  The easiest way was to have the DLL in the same directory as the VI.

• Why the search function of 25 FF is more difficult to use?

  I use a lot search in FF. In earlier versions, the options to highlight all and case-sensitive were next to the search field, all clustered together on the lower left corner of the screen. Starting with version 25, 2 options are pushed all the way to the right of the screen, which makes them difficult to access (in fact, at first I thought that they had been abducted).

  What is the logic behind this change and how to configure the search formatting as previous versions bar? (Please don't suggest the use of any add-ons, FF is running slowly enough as it is).

  Thank you!

  The search bar has been redesigned for the interface user Australis coming, coming in Firefox 28,0 or 29,0.

  See this code to userChrome.css cor - el wire - https://support.mozilla.org/en-US/questions/976166 - bar fixing bracket posted to find 25 Firefox without the need to install an extension.

• Why the 'Stop' button is gone in version 7.0.1?

  In the past Iwas able to click on 'stop' when a page not loading after a period of time. In the 7.0.1 version the 'stop' button is ono is more available, or at least I can't.

  Why it has been removed in version 7.0.1. and if not removed, where is he?

  Glad to have helped, thanks for posting back, solved messages appear in searches and help others with similar problems.

• Why the STOP button stops not timed loop.

  Hello world

  I had a rather complicated code launched against me. I had to change program action unique (and many other things) when ACQUIRING a button has been clicked making timed measurements. I was able to add the time... but I want the loop to stop once you click on the STOP button.

  I have attached a very simplified version of my code.

  So if you start and press the ACQUIRE the program generates random numbers (to simulate the measure) and records them with a device ID. The program stops once the total is for instance in the default settings after 20 sec.

  But it does not stop when you press the STOP button. MY QUESTION: why not?

  FOR INFO:

  In my actual code, there are 10 events instead of only 1.

  It doesn't have to stop immediately, inbetween iterations (because I already tried to include the timed stop Structure VI and it did not work either).

  I also used the execution to highlight, but it did not help me.

  Thank you for any help or suggestion!

  Lisa

  Lisa,

  First of all, thank you for explaining clearly what your problem and to present a simplified program.

  The problem with your program is very simple. The loop inside the structure of the event begins when the acquisition: Mouse Down event occurs, which seems to be what you wanted. The default condition for the case of the event is "front Lock (defer the treatment of the actions of the user) until the end of the occurrence of the event." This is controlled by a checkbox at the bottom of the evetn installation dialog box. What this means is that the stop button is not recognized until AFTER the event is complete.  BUT the case of the event cannot complete until the while loop stops.

  The Solution: Move the loop outside the case of the event.  Generally speaking, event must not contain any code that could take more than a few milliseconds to run and certainly should not depend on the user's other actions to complete.

  Look at the design of producer/consumer models (events) for advice.  Also learn how to use queues to pass data between loops rather than local variables.

  Lynn

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• Why the port is different with others in Nexus7710?

  Hi you see below. Why the port highlighted number is different with Eth4/23 when you use the command show interface brif? Thank you

  Eth4/22 - eth routed down administratively to auto (D)-
  Eth4/23 - eth routed down administratively to auto (D)-
  Eth4/24/1 - eth routed up to 10G (D) none-
  Eth4/24/2 - eth routed down administratively to auto (D)-
  3/24/Eth4 - eth routed down administratively to auto (D)-
  Eth4/24/4 - eth routed down administratively to auto (D)-
  Eth7/1 - eth routed down administratively to auto (D)-
  Eth7/2 - eth routed down administratively to auto (D)-

  They look like this:

  http://approvedoptics.com/Cisco-QSFP-4x10g-aoc10m/

• Mix volume slider controls appear on the screen and interfere with internet and other functions.

  Without warning, that controls Volume slide bar appears on my screen fluctuating levels as I was changing the volume/bass/treble level. This stops / blocks everything I do on the laptop such as typing, internet, turn on my connection 'Wireless', turns on volume mixers (I keep off) and stops my typing. It will last for varying periods of time, and then everything returns to normal. It happens on or off the power of the internet, wired or wireless.

  Played HP scan & all checks on okay scanned for all to implement. Everything is up-to-date.

  have screenshots

  product #: HP DDX16 Premium Series

  p/n: NK135AV

  model # X16t-1200

  Windows 7 Ultimate 64 bit

  

  Hello

  Unfortunately there is no firmware update for the capacitive on your particular model - instead, try the following.

  First of all, download and reinstall the utility to control the tone of HP on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45617.exe

  When you are finished, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  This makes a difference in the question?

  Kind regards

  DP - K

• No idea why the trace function is limited to 256 colors?

  y nA <-I typed everything and instead, it came out like that. It's the same thing when I tried to type "I want." VERY WEIRD. Worked fine in Notepad.

  On the subject. Why trace would be limited? I can imagine system performance would be affected by more colors, but shouldn't this be left to the user if they want to deal with?

  Looks like that the traces could be even more realistic picture if they allowed more colors.

  On the subject. Why trace would be limited? I can imagine system performance would be affected by more colors, but shouldn't this be left to the user if they want to deal with?

  Performance is more or less irrelevant. You get all simply yourself in a lot of trouble to create math of quantization under the hood in something else than 8 bit, at least with most of the algorithms. If you want, you get just too much to work with and the results of the internal equations get more ambiguous, which may have the undesirable effect of actually produce out worse. That said, it is really not meant for the realism of photography. If you wanted that you would employ different principles together to work with fields of vectors 3D instead of pixels or voxelization of algorithms that produce 'stable' results by comparing all the pixels, not just those near a certain threshold.

  Mylenium

• Why the selective function does not work.

  I used Adobe 2, 4 and 5 years.  I frequently ask selective highlights or sharpness in an image using the layer to double orders, highlights, adjusting the image, layer mask, hide all.  When I try to apply selective effects using brush nothing happens.  ???  How can I solve this problem?  I appreciate your help.

  Ted

  Ted,

  There are a few things that could cause that. The most obvious is that you use not perhaps not the right color (transparent, visible/black-white) or maybe the opacity of the brush has been set to a low value. If not, the next thing I would do is to check and make sure that you have the thumbnail of the layer selected and not mask the image layer in the layers panel. If this does not work, could you upload a screenshot?

  Jason

• Why the execution time increases with a while loop, but not with "run continuously?

  Hi all

  I have a problem of severe weather that I don't know how to fix it because I don't know exactly where it comes from.

  I order two RF switches via a data acquisition card (NI USB-6008). One job at the same time can be selected on each switch. Basically, the VI created for this feature (by a colleague) resets all the outputs of acquisition data and active then those desired. It has three entrances, two chain simp0le controls and a cluster table, that contains the list of all the outputs and some practical information to know what is connected (specific to my application).

  I use this VI in a complex application, and I have some problems with the execution time, which increased whenever I said the VI, so I did a test VI (TimeTesting.vi) to determine where the problem came. In this special VI I record the execution time in a csv file to analyze then with excel.

  After several tries, I found that if I run this criterion VI with the while loop, execution on every cycle time increases, but if I remove the while loop and use the funtionnality "Continuous run", the execution time remains the same. In my high level application, I have while loops and events, and so the runtime increases too.

  I someone could explain to me why execution time increases and how can we avoid this? I have attached my VI test and the necessary subVIs, as well as an image of a graph that shows the execution time with a while loop and «run permanently»

  Thanks a lot for your help!

  Your SetReset_DO VI creates a channel whenever it is called.  And that you never delete a task.

  When running continuously, that it's as if it only runs once and LabVIEW has internal mechanisms to close references that will not be used again.  When a VI is used as a Subvi, LV does not know if she will be called again, and lacks these things until the first level VI stops. You have a memory leak.

  Just as you open and close your file outside the loop for, create your channel out of the loop.

  Lynn