Why the videos play too fast and with no sound?

Similar Questions

• You Tube, after that 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too

  For example: in You Tube, after 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too.

  If you get no audio cd, youtube or anything else, you must first check in the volume control that you are using the sound card, you are connected, that nothing is on mute and volume is sufficient, or install the drivers for your sound card.

  Video YouTube can be that your internet connection is slow or too much peoole try to watch the same video, save it to your hard drive and then watch or, give him a minute or two to download in the buffer before you start watching.

• If I replace my TIFF sequence with a model of EI, the TIFF plays too fast in AE?

  In my first pro project, I have a layer with a TIFF sequence on it. The cuts in the TIFF are in correct synchronization with the music track I. If I take an article of TIFF and replace it with an AE Comp, TIFF plays too fast inside AE, and obviously because of the music track. A that someone already had this problem? There is no change in speed for the original TIFF within the first that would cause the problem.

  If someone sees this, my problem was that AE interpreted the images to the wrong frame rate. I had to right click on the computer inside the AE and interpret the images at the right pace.

• Exported export for DVD - video plays too fast

  Hello useful people!

  I am relatively new to first - but familiar with Final Cut. With the help of Adobe first Pro CC v8.1 on Mac.  I have a video that was filmed in 1080 p, and I took the settings for the sequence in function (or so I think).

  The video is superb in the first and I need to create DVDs to send to England (I'm American), and they should be able to play in a standard dvd player there. My understanding is that PAL would be the wisest choice for encoding. I try to keep the simple export, and I exported several times using PAL and NTSC and while audio files are fine - for PAL and NTSC, video files are significantly shorter than the actual film and plays in a kind of fast forward. First, the film plays 17 minutes, but when I open the exported .m2v files they play only at 14:33,- or that I have finally (somehow) got up to 15:00 minutes. Only 15 minutes we got of not to tweak the settings at all - on the previous, I had read somewhere to increase the bit rate and use VBR pass 2 for best results. However, 2 minutes is still a big problem.

  Here are the screenshots of the sequence settings and export settings more simple I used - example of the NTSC.

  Any help is very appreciated! Thank you

  

  

  

  I personally consider QuickTime the scourge of video production, whose use must disappear from the landscape quickly and permanently.  Try VLC instead.

  VideoLAN - official page for VLC media player, the video frame Open Source!

  I say just go ahead and the author of the disc.  Chances are good it will work correctly.

• Why my Ustream playing too fast?

  My Ustream plays at a speed too fast, the live feed and archives

  I believe that this forum will answer your question.

  Flash player 17.0.0.169 problems.

• Why the videos play on Firefox 13.0.1 but goes on IE9?

  All the plugins as current report - I even reinstalled Firefox! But for some time I get the message ' year error occurred, please try later "on YouTube and a blank space where the video should be on sites like Earthcam and the Science Channel.

  You may need to downgrade to 11.2 Flash or 10.3. Problems that Flash and Firefox developers are working on are known. Unfortunately we continue modifying the tips until the situation changes.

  Current recommendations
  
  _{Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 13 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.
  To resolve this problem, follow the steps in these articles in the Knowledge Base:
  Flash Plugin - maintain and troubleshoot
  Adobe Flash plugin has crashed - avoid that it happen
  11.3 flash does not load video in Firefox
  We'll find other information on more technical issues under these links:
  http://forums.Adobe.com/thread/1018071?TSTART=0
  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html
  Please tell us if it helped!}
  

  You need to keep control of the links such as the following, revised information

  • Adobe Flash plugin has crashed - avoid that it happen , we try to keep the article updated,- and links to other Flash 11.3 and FlashPlayer troubleshooting information
  • A related, but the article to long day & techi is http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows

  A separate issue involves RealPlayer using if you have problems with Flash Player, please at present always mention that no Real Player software installed.

• Printing multiple pages; going too fast and jams

  I have a HP 1200 laser printer and want to print 85 double-sided copies, printing page 1 and then put back copies through to page 2. The problem is that the printer goes too fast and jams of all other pages or two. I can't think of anyway to slow it down, or any other reason for the jam. It works fine on small jobs.

  Thanks for the information. I checked the "components", and they seem to be OK. I suspect that the problem may be the quality of the paper (dried, perhaps). I'll mark this as resolved.

• Why some videos play well on Facebook while others have only audio with a green screen?

  Why some videos play well on Facebook while others have only audio with a green screen?

  Hello

  Green screens are almost always a sign of a video driver issue.  Could you please send the contents of your "Display devices" section after generating a DXDiag report?

  What is a Dxdiag and how to report a?

  I suspect you may have an outdated video driver.  This FAQ can help you learn the steps required to update:

  Windows: How do I update the device driver for my graphics/video card?

  Finally, if the driver update doesn't help, try turning off hardware acceleration using the steps described here:

  How to disable or enable hardware acceleration?

  Thank you
  Chris

• HP pavillion dv-1120us I can't play the videos online. they freeze and make a terrible noise.

  I have a Pavilion d4-1120us and he won't play videos u tube or other sites.  I'm freezing and I have to stop to get out.

  Can anyone help?

  Hello

  Try the following.

  First, download the Flash uninstall utility on the link below and save it to your desktop.

  http://download.Macromedia.com/pub/flashplayer/Current/uninstall_flash_player.exe

  Once the download is complete, close all browser windows and start the program uninstaller.  Once done, restart the laptop.

  Then, download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash.

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the video play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a command prompt to install the ActiveX component.  Once completed, restart IE.

  Kind regards

  DP - K

  

• Adobe Premiere video playback too fast

  Hello

  I am at my wits end guys. I run the file in VLC and everything is normal I import into first and plays the video at a faster speed, the sound plays at the correct speed.

  I have my sequence corresponds to the file, checked my read speeds and they are all normal.

  Can someone help me please, pulling on my hair.

  Path: D:\Game videos\mafia2 2016-08-21 16-46-29 - 981.mp4

  Type: MPEG Movie

  File size: 4.36 GB

  Image size: 1920 x 1080

  Frame rate: 51,34

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total duration: 00; 17; 17 57

  Pixel format: 1.0

  Sequence:

  

  

  Let me know if you need anything that anyone else.

  Your sequence does not match your file.

  Your sequence says 10 fps, your 51,34 file.

  Both are out of the ordinary.

  Convert file to constant cadence with Handbrake and try again to get a sequence that is correct.

  Than that shown is all incorrect parameters.

  51,34 fps is not standard.

• When paused in the timeline the video is very pixelated and has red and yellow lines going down it

  When paused in the timeline the video is very pixelated and has red and yellow lines going down it.

  He plays very well, but when any display of still images he look like the image below. Someone knows how to fix this?

  

  Hey Danny,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and it should work.

  Check out this post on the forum for more details: Heads up on first with El Capitan

  Kind regards

  Navdeep Pandey

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• None of the videos play in my firefox. Please suggest what to do?

  None of the videos play in my firefox. To do this, no en = load Fri. Not sure what the problem is.

  Could you please help?

  Concerning
  d3vanshu

  I had the same problem and the fix suggested - ranging to an old version of Adobe Flash - worked. You can see the responses here: https://support.mozilla.org/questions/931193#answer-348636. A big thank you John99 and cor - el.

• How can question I change my settings to flash? I said I wanted to be invited to flash store things on my computer but the guests are too frequent and annoying!

  How can I change my settings to flash? I said I wanted to be invited to flash store things on my computer but the guests are too frequent and annoying!

  New versions of Flash have a sign installed on your system for the control of the settings.

  In Windows XP, start > settings > Control Panel > Flash Player, click each tab and change the setting "ask...". ». Most likely your guests are coming in the tab "storage." By using the parameters of "Block"... "can let Flash on some sites.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I have a 22 inch monitor set to 150%, but since I installed Firefox, the font is too small and the screen is too small. Cannot enlarge font or screen. I can do control ++ whenever I have enter a page but don't want it as my solution.

  Control/display panel, I got my screen set at 150% and a resolution of 1680 X 1050. It filled my screen 22 inch with the content of the page. Now that I have installed Firefox, the police is too small and the content is centered in the screen leaving about3"each side of the space empty. I want to fill the screen and make things bigger. Have not found a way to do it. Firefox tells me in my window/display of the control panel that setting my display at 150%, ' some elements may not match your screen if you choose this setting if your screen is positioned on this resolution. " It worked fine with the Explorer.

  To help other users find solutions, please come back to this Thread and connect you to the

  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer