Will be that eloqua is supported by the WAP scripts?
I'm curious to know if Eloqua also supports the WAP scripts.
No, we do not support the WAP scripts.
-C
Tags: Marketers
Similar Questions
-
The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...
Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls
-
If I share a garageband e-mail project, the other person will see that my saved loops on the side I have prefer?
maamefrommississauga wrote:
If I share a garageband e-mail project, the other person will see that my saved loops on the side I have prefer?
No, this information is stored locally on your computer only
-
"You have received an error C00D1199 message while using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »
The file audio im trying to open, a conference for a class I'm taking. Is there anyway that I can get the audio to play? program in windows media, itunes, quicktime player?
Hello
You can check this link:
http://Windows.Microsoft.com/en-us/Windows7/C00D1199
Note: This link implies also on Windows vista.
-
File compressed using a codec that is not supported by the player
I use Director of windows. I can't import audio my cd or i tunes = reason "file compressed using a codec that is not supported by the player", how to fix this? What are the options?
Thanks for your help.
Hello
To check the file type, follow the steps below:
(a) access the location where the file is stored
(b) right click on the file
(c) click Properties in the drop-down list
(d) under the general tab check the listed file type.
File types supported by Windows Media Player 12 and Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/file-types-supported-by-Windows-Media-Center
For more information about iTunes contact Apple support in the below given link.
http://www.Apple.com/support/iTunes/
Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. You may encounter this error message for the following reasons:
1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.
2. the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.
Hope the helps of information. Please post back and we do know.
-
I have PS CS5. I had a friend send me some raw images trying to open I got this message: "line seems to be a model of camera that is not supported by the installed version of camera raw. What should I do?
Download the 9.1 free dng converter that should open most of the files that your friend sent you.
-
When will Hi there, there be support for the Olympus PEN E - PL7?
When will Hi there, there be support for the Olympus PEN E - PL7?
It's on our radar and hoping to incorporate it in a next update.
As soon as it is available, it will be updated in the article below. Camera Raw plugin | Compatible cameras
~ David
-
Help please: CloneVM_Task is created but will fail with: operation not supported on the object
Someone Please help with this, I'm breaking my head with this for 5 hours now.
I submit, in CloneVM_Task with the following XML (which returns a task id back http://i.e. the application has been accepted in this format):
& lt; CloneVM_Task xmlns = "urn: vim25" & gt;
& lt; _C type = 'VirtualMachine' & gt; VM - 938 & lt; / _This & gt;
& lt; record type = "Folder" & gt; Group d1 & lt; / file & gt;
& lt; name & gt; 1_UBUNTU 804 & lt; / name & gt;.
& lt; spec & gt;
& lt; location & gt;
& lt; data store type = "Datastore" & gt; datastore-683 & lt; / store data & gt;
& lt; pool type = "ResourcePool" & gt; resgroup-57 & lt; / pool & gt;
& lt; / location & gt;
& lt; model & gt; 0 & lt; / model & gt;
& lt; powerOn & gt; 1 & lt; / powerOn & gt;
& lt; config & gt;
& lt; memoryMB & gt; 1024 & lt; / memoryMB & gt;
& lt; numCPUs & gt; 1 & lt; / numCPUs & gt;
& lt; / config & gt;
& lt; / spec & gt;
& lt; / CloneVM_Task & gt;
However, the task itself returns an error saying: the operation is not supported on the object.
Does anyone know what it is?
The info that I'm sending should be 100% correct:
- vm_id: the machine ID of the virtual MODEL VM I'm cloning (100% certain that it is correct)
- file: the rootFolder returned by ServicContent
- data store: the data store ONLY I should store VM on. When I query for this data store information it shows clearly that it is accessible and multipleHostAccess = true, so
- resourcePool: I got this info when querying my ComputeResource properties. I have 1 cluster and resourcePool value that's what I put.
I really have NO idea what's going wrong here... The CloneVM_Task creates a task - but that's where everything falls apart.
Please HELP!
Yes, you should not use the rootFolder, which is just the folder root inventory integer vCenter. A default vmFolder will still exists if you have additional folders, and that's the one you reference to. By default, you must question him to do this, where one day you decide to create folders against hard coding moref ID. The IDS are digital and probably default folder gets this value by iteration, but again, I recommend he petitioned against hard this coding.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
I want to edit my images raw on photoshop cs5. But when I go to open the. File CR2, it says:
"Could not complete your request because the file appears to be a model of camera that is not taken in charge by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information. ''
When I go to the updates using photoshop I try to update photoshop and photoshop camera raw, but it then says
"Updates cannot be applied to the error log file can help you identify the problem. Then try to update again. If problems persist, contact customer support for further assistance.
8.7.1 (CS6) Photoshop Camera Raw there is an error in the installation of this update. Quit and try again later. Error code: U44M1I216 "
I don't know how to get around this help please
CR2 files of what Canon camera?
Supported cameras is listed here
-
XDCAM and Canon XF formats that are not supported in the first CC 2014
Having improved first Pro CS 6-CC 2014 (v8.0 / 2014.0.1), I find myself unable to import media to Canon XF or XDCAM format.
When you navigate to these folders from media, the Prime Minister refuses to import these files into the timeline. When you select a video file, first get a message "Format file not supported".
I tried two ways to install Premiere Pro:
-Via the single installer downloaded from the Adobe site.
-With Adobe Creative cloud conditioner.
Facilities have been made on an own OSX 10.9.4 system.
In both cases, the same result, the files cannot be opened (only VLC is able to read).
Any ideas how to solve this problem?
OK, finally, we found the solution:
We have two different serial numbers for our Creative Cloud ENT licenses, one of them is labeled EDFUL No. 15, the other V15.
It seems that installation using the N15 series allows to launch the first, but does not activate the XDCAM and Canon FX video codecs.
When installing with the V15 serial, the codecs are enabled.
Now, it would be interesting to know more precisely what products are covered by serial number (we found no specific information in the dashboard licensing.adobe.com).
-
Will be that Windows XP supports Hyperion 11.1.2.1
Hi all
I doubt if Hyperion 11.1.2.1 can be installed on windows XP SP3. Kindly guide me how to install Hyperion 11.1.2.1 on windows XP SP3.
Thanks and greetings
SAIIf it is the client software then yes it should be supported, the server components then no, this is not supported.
See you soon
John
http://John-Goodwin.blogspot.com/ -
iPhone 6
Network: Verizon
iOS 9.3.3
Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:
"your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »
or:
"The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »
My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,
Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.
Apple says call Verizon. Verizon said, you guessed it, call Apple.
When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.
What is going on?
kennypg wrote:
iPhone 6
Network: Verizon
iOS 9.3.3
Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:
"your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »
or:
"The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »
My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,
Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.
Apple says call Verizon. Verizon said, you guessed it, call Apple.
When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.
What is going on?
I think it's a problem with Verizon.
Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.
-
I get an error when I try to open my photos in photoshop cs5. the file seems to be a model of camera that is not supported by the installed version on camera raw, he said. Please see the documentation of camera raw for more information.
What should I do?
Generally help > updates can do for you and it is important to get all the updates for CS5 in.
If it fails, update Adobe Application Manager and let me know how it goes.
You can find the update here: other downloads
-
How to name a layer with the filename - script or action?
Hi all
Can someone tell me if it is possible to automatically name a photoshop layer as the name of the file itself?
I have 600 cases to do and need to automate the process.
Thanks in advance for any advice.
Marvo.
Open ExtendScript Toolkit that can be found here: -.
PC: C:\Program Files\Adobe\Adobe utility
MAC:/Applications/Utilities/Adobe utilities Copy and paste the code into a new window, and then save the code: -.
PC: C:\Program Files\Adobe\Adobe Photoshop CS #\Presets\Scripts
Mac:-[hard disk] / Applications/Adobe Photoshop CS #/ Presets/Scripts /.If photoshop is open, close and restart it so that Photoshop can pick up the new script.
Now you can create an action to run the script and your backup to make this action can be processed by batch.
To add the script to your action:
File - Scripts - select the script (this will add the new layer) -
[SOLVED] Export Oracle SQL Data Modeler is missing a PRIMARY KEY on the DDL script
I use data 4.1.888 maker to create an ER diagram and generate a DDL her script.
The diagram contains more than 40 paintings, most of them have a primary key defined.
For some reason any there is a table that has a primary key defined, but which is ignored when I export the model to a DDL script.
It is the "wrong" key (even if it is checked that it is not found on the generated DDL script):
This is where the key is set:
And it is the preview of the DDL (Yes, primary key up there shows):
This is what happens if I try to generate the DDL for just this (still not generated primary key) table:
Has anyone had the same problem? Any ideas on how to solve it?
There is no error in the log file, but when I run the generated DDL script there, and then I realized that I was doing something wrong:
The table MEMBERS had a mandatory foreign key from another table, which in turn had a mandatory key against MEMBERS himself.
So even if I could generate this primary key on members myself, and then run the the constraint definition that returned an error on the DDL script, I could not perform an insert operation on any of these two tables because of the constraint.
I revised my design and realized relationships was not mandatory. I unchecked the mandatory box on the definition of the constraint and everything went well.
I could reproduce the problem and the solution on a diagram with only two tables, so I'm sure that's it.
Anyway, the Data Modeler is "a failed" silently in this kind of situation. It should be fairly obvious to an experienced designer that I was doing something wrong, but it is not so obvious when you deal with dozens of tables and all their relations and this is your first time using the Modeler.
Thanks for your reply :-)
Maybe you are looking for
-
stream HP laptop: keyboard setting
My keyboard is set as in the United States, can it be set as uk permanently
-
Impossible to find a job AHCI driver for windows XP, HP Elitebook 8570p
Hi, I need help finding a driver AHCI (Windows XP) to my Elitebook 8570p. I want to use Windows 7 and XP on it, but I can't install windows XP in AHCI mode. I tried to use the driver that is posted here: http://h30434.www3.hp.com/t5/Notebook-Operatin
-
I see the above error message when I try to update WMP. Windows 7 64-bit.
-
How to get the zoom factor in the management of the user interface?
HelloIs it possible to get the zoom level in a handful of current doClick?In fact, I would like to calculate the size of the window where the video appears.I tried using source_to_frame but failed.Thanks in advance!
-
HelloWe have an Iso file (custom, provided by 3rd party that contains the drivers as well as the Esxi).Is it possible to get the zip file of the iso in order to save the Image profile and start using to auto deploy?Thank you.