Win 7 (64) "sleep" and "hibernate": power supply for USB devices

Similar Questions

• Sleep and Hibernate works not properly

  Hello
  I have a laptop HP running Win7 64 bit which has developed a problem when you use power-saving features and ensures extended. I rarely stop or restart the system and very rarely use Hibernate, opting instead for simply use sleep function when I close the lid. Stop and restart both to perform as expected, but whenever I try to use the sleep function, either by closing the lid or via the options on the start menu, simply, the screen goes black and the laptop runs - the fan is on and the hard drive light flashes sometimes. I waited for about ten minutes, but nothing changes. Then, when I lift the lid to wake the system, nothing happens and I have to do a closed hard. The same thing happens with the Hibernate.

  I used the system restore already to try to resolve, by choosing a restore point, a few days before the recent updates or system changes, I did but the problem remains.

  I also changed the settings in the power settings to try to solve the problem, but once again failed to do.

  I turned it off Hibernation using start, run, powercfg-h off but once again, this has not fixed the problem. >

  Any advice greatly appreciated.

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------

  More that might help.

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  (also Windows 7)
  http://support.Microsoft.com/kb/950686

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  
  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  
  How do I change the sleep settings in Windows 7 (including hybrid sleep)
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  =======================================================

  If necessary after trying the above, (this won't help if all settings are always wrong).

  Try a repair Installation which should allow you to maintain programs and the same data if
  redundant backups are always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Qosmio X X 770-11 - new motherboard and power supply for sale

  Brand new motherboard and power supply for sale

  Posted by jtk
  

  Brand new motherboard and power supply for sale

  Also Intel® Core i7-2670QM CPU
  4 096 + 4 096) MB, DDR3 RAM (1 333 MHz) memory
  1 000 hard drive (Solid State hybrid 4 G Drive with 500 GB and 4 GB of memory NAND flash + 500 GB) GB
  Jim Kerr sent from my iPad

• Get a new case and power supply for my HP Pavilion a6355.uk

  1. sound of the HP Pavilion a6355.uk

  2. Windows 7 Professional 64-bit

  3. no error message

  4. it is not a problem, but its had a new graphics card, new ssd, another hard drive, removed the 500 GB hard drive, and that's all I think.

  Hi, I want to get a new case and power supply for my office

  If I want is http://www.pcworld.co.uk/gbuk/antec-one-0-761345-15970-8-atx-full-tower-pc-case-black-13374257-pdt.h...

  The power I want is http://www.pcworld.co.uk/gbuk/zs650w-uk-zs-series-ocz-zs650w-uk-atx-psu-650w-11342059-pdt.html

  Is 650 Watt most the jury can take? I read somewhere that most can take is 650 watts.

  My only concern is that, how do you take the I/O shield? I've never done before.

  Yes, it will fit your card mother Μatx.

  PS > remember to toggle the toggle SOLVED / SOLUTION to the right of MY post/reply.

• I can still access my Manager tasks, Shut Down, restart, sleep, and Hibernate options went on the Start Menu After uninstalling Secure browser review.

  I recently downloaded Secure browser review for a test in Spanish for a class.  I uninstalled the program successfully, however I still can't access my Manager tasks, Shut Down, restart, sleep and Hibernate options went on the Start Menu.  Finally, before taking the test, my computer is always locked.  This means that whenever he 'slept' that I have to enter a password or use my HP SimplePass of fingerprint to unlock.  Now, it does not require a password, or it is not locked.

  I don't think SEB is not completely uninstalled, or he changed the settings on my computer and I can't figure out how to change their return.  Help, please!

  Original title: Secure Browser review

  Hello

  Do a system restore, if necessary in Safe Mode, until you have installed the browser...

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  See you soon.

• Questions about the replacement of a power supply for a P7-1235

  I decided to do an update on my Pavilion P7-1235. I put in a graphics card and put in power level. After doing some research on this forum and others I know well enough that I need. The only question I have is about the food. I don't know what the original power supply. There is a vent on the side where it however. So I guess that there is a fan on this side of the power supply. This eating plan I get:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139050 & TPK = % 20500% 20% 20modular %2 watt Corsair...

  I noticed that the fan is on top? Now there is no high ventilation in my P7-1235, I worry for nothing? I think that all the supplys to look the same. What is the top of the fan page for? Or can anyone suggest a replacement perfect for my exact Pavilion model?

  Sorry if the questions are stupid, but I'm still learning and want to do what I can myself!

  Hello

  Yes, you can use the power supply the same way. The image is in a vertical position for the convience of the buyer. I have the same with number of power supplies and it was fine. You can check the following links people have set up exact POWER supply in different ways.

  http://pcpartpicker.com/builds/by_part/Corsair-power-supply-cx500m

  However, please be aware of your power supply size and your case. If you have all materials/components in stock for your computer, then it is what it is;

  ATX case:

  : Height 39.4 (15.55 inches)

  Width: 17.5 cm (6.89 in)

  Depth: 40.9 cm (16,14 inches)

  PSU stock:

  (5.9 x 5.5 x 3.4 inches)

  And the power supply you want;

  Corsair size;

  "5.9"x 3.4"x 6.3"

  As you can see the length of the Corsair is considerably larger than your stock of power supply. This could hampor of air or could even make it so the holes of the PSU and the case does not match. However, this is usually not what worry. The height and width that should be worried because the length rarely causes problems, I wanted to just make sure that you knew in advance.

  Take advantage of your power supply; Corsair is a great brand.

• Power supply for use in the UNITED Arab Emirates

  Hello

  I just bought a Time Capsule of the airport and an Apple TV (4th gen).  I'm moving to Dubai for work and I intend to take with me.  I can't find out how to replace the power supply for use in Dubai (plug type G).

  • Can I just buy a travel voltage converter?
  • What is the frequency difference (US is 60 Hz and UNITED Arab Emirates is of 50 Hz)?
  • Could I just buy a 'EnergyPal travel Charging Station ETCS04' and connect directly?

  Thanks for any help!

  The airport Time Capsule and the Apple TV work on 100-240 Volts and 50/60 Hz automatically, so they'll work pretty much anywhere in the world if you have the map of the right ankle.  A voltage converter is NOT necessary.

  You can buy the cards you need to any store from the airport, luggage, in Dubai store, etc., most of the hotels the.  If I remember correctly, Dubai uses the same type of plug that she used in the United Kingdom, as well as should work as well.

  http://www.Amazon.com/Ceptics-grounded-Universal-Plug-adapter/DP/B0080R95XI/ref= sr_1_1? ie = UTF8 & qid = 1455557366 & sr = 8-1 & key...

  I do not think that the higher 5 GHz channels are permitted in Dubai, so be sure to put the time Capsule to use a lower numbered GHz 5 channel... 36, 40, 44 or 48.

• HP 15-AC184TX: power supply for laptop HP 15-AC184TX

  Hello. I need to buy a new power supply for a 15-AC184TX HP laptop.

  The page support Web HP heredoes not tell me what specifications is feeding.

  (I have no original power to compare).

  I hope that someone more competent than I can help you!

  Thank you, JER.

  Maintenance and Service Guide. HP part number is at the end of each)

   

• Upgrade power supply for dell Inspiron 530 (not slim)

  Yes, it's an old computer, but I want to upgrade the power supply for it. Watts, preferably something of 400 or more, but I can settle for 350w or 300w

  I have improved the power supply on an Inspiron 530 with an Antec 550 watt modular power supply with no problems.  Just be sure to buy a power supply of standard size, and you should have no problem.

• power supply for Dell PowerEdge SC1430

  How can I order a power supply for Dell PowerEdge SC1430?

  Maintain the NOTE from the ADMINlabel: maintain the label removed by privacy policy >

  Call Dell Firewall 1-800-357-3355 parts and ask for prices and availability of the Dell Reference number. Or simply search the Web for the part number.

  MK463 Delta power 750w
  U9692 Hipro power supply 750w

• Need new power supply for my HP p6210y

  Hello

  I have a HP p6210y (http://support.hp.com/us-en/document/c01859864) and I need to upgrade the power supply for the Radeon HD 4890 I have now. I am reviewing the PSU below. However, the dimensions are actually smaller than my current diet. Who's going because of my problems in terms of ride it properly in the case?

  http://www.Newegg.com/product/product.aspx?item=N82E16817338038

  If this will cause problems, can anyone suggest a power supply (it's the exact size as my current) which would be suitable for my graphics card. I need "500W with two connectors to power 75W 6-pin PCI Express.

  Thank you!

  I believe that the PSU is designed for a different style of the case. Discover the Corsair CX500, or CX600 power supplies. They are highly recommended and are favorite forum. In addition, they are only slightly larger than the stock power supply HP and are known to adapt.

  Frank

• HP Elite 1090-T H8: seeking your suggestions for upgrading the power supply for a new video card

  I have a HP EliteH8-1090 t who is about a year, but with an AMD Radeon HD 6570 low power graphics card and a 450W power supply. I want to upgrade the 650W power to support the installation of a replacement graphics card.

  I tried to replace the HP 450W with Corsair TX650 and Corsair TX850 food. The system appears to power (DVD drawer opens and closes, the hard disks spin, fans run) with either a Corsair, he's stuck at this point. My system is unable to enter start mode when either power supply is installed - it seems stuck in a mode of seed, and the monitor still asleep.

  Can someone please advise on a compatible power supply for HP system? I'm puzzled by why a simple exchange of a power supply does not work. Just like a record, the system has a card mother Pegatron IPMTB-K (Truckee).

  Thank you!

  No problem. I wish you good luck with it. On a positive note the HX650 is a much better than the TX650 ILA unit internal quality and what I like is the best it's quite fan fan much quieter than the TX650 while helping your organization of cable being modular and help keep temperatures cooler in your computer case.

• Power supply causing USB problems.

  I recently bought a HP p6267c at Costco. It is a system of Q8300 with 8 GB of RAM and it works quiet well. As the graphics card on this subject is not as good as my 9600GT, I decided to give it a shot. Only problem is that the power supply on the HP does not have the PCI-E power connection. I put in my diet from my old computer and the computer starts well, just all USB ports do not have the connections of the mouse or the keyboard. I plugged in my iPod and he acknowledged and grew. I wonder what could cause my power supply for connecting USB not notice just the keyboard and mouse.

  Well, it provides enough power for the USB on my old system. Also, I put the 4350 in the system and does not require the PCI-e power, and it still does not detect the keyboard or the mouse. I don't know exactly what is the cause, but the 5V shall not work just somehow on the new computer. The Board just freaked out on me too, so I think return this machine and starting from scratch. Thank you for the help guys, but I just think I got bad luck on this one.

• Want to a new power supply for my SG3-250uk

  Getting a new power supply for my SG3-250uk because I need a new graphics card, but I don't know which ones fits, please help. Thank you

  MattSid wrote: Yes, that thread has me also, I posted this one to see if I could adapt a new PSU in my computer

  Hello MattSid, I did a search on Google for the model number of your system and found several sites that have tried to upgrade the model you have and suggestions that these owners have been advised that it was impossible successfully.

  Sorry

• Power supply for Pavilion a6720f?

  Hello. Is power supply for an a6720f a standard ATX, or something exclusive? I need to know.

  Thank you.

  This is a standard size ATX PSU - 5.5 "by 5.9" by 3.4 "but confirm this by opening your PC and by measuring the PSU.  Go back to the bottom of all the cables coming from the PSU for the endpoints so that you know which links are necessary.