Win7 64 bit, receive 32-bit updates

Similar Questions

• Install Win7 64 bit update on the new build machine

  Initially, I bought a Dell machine with Win XP installed on it, that was obviously an OEM installation. Later, I bought an update to Win7 (boxed version containing two DVD - 1 x 32 bit and 1 x 64-bit).

  I looked at the product key on the System Properties screen and it does not contain the letters OEM, then it means that when I upgraded the operating system he converted it from version OEM to a retail version?

  The reason for my question is that I intend to use this system for donor parts and build a new one, but it will contain a different MB, CPU and RAM, which if I understand correctly this is what the OEM versions are related to. Building the new system, I will seek to install the 64-bit version rather than the 32-bit on the current computer.

  And just to confirm, the old system definetely will be out of use and therefore discarded. I don't mean to reproduce the number of facilities, any transfer from one machine to the other.

  Thanks in advance
  Steve

  Hi Noel, thanks for your response.

  I have to admit your backup response I expected in the case, but...

  Since my original post, I have been informed of "Universal PID Checker", I used to check my current installation (the one I'm looking for scrap) and he informed me that I have a retail version.

  If I will have to just suck it and see?

  With a question mark above it, I do not want to splash out on a new license if it is not needed.

  You will need to invest in a new full version license, because the machine you build will not have an existing previous license eligible to use the upgrade version.

  You can try the following and see if it works:

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Qosmio F50 - need to update the BIOS in the order of installation Win7 64-bit

  Dear community,

  I plan to upgrade to Windows 7 64 bit. My laptop is Toshiba Qosmio F50 - 10 M with a VISTA32bit preinstalled.

  Is it necessary to update the prior consent of BIOS install the new OS? I read that there is a BIOS update Fa? ¼r VISTA64bit available, but none that I discovered for Win7 64 bit.

  Can give you a hint?

  I am confident and happy to own a laptop as powerful but this not filled OS named VISTA makes me nuts more in addition to reading all these great reports about the benefits of Windows7!

  Looking forward to read your welcome responses

  Yours,
  Starmind

  Hello

  Is there a BIOS for Vista 32 bit and 64 bit.
  There is no special Win 7 BIOS.

  If you want to install Win 7 64 bit, I advise to use the BIOS for Vista 64-bit. If you want to install Win 7 32 bit-> choose vista 32-bit BIOS.

  Generally, it should be possible to upgrade the BIOS under Win 7 so, but because that it s a BIOS for the Vista operating system, I recommend upgrading the BIOS in Vista.

• Satellite L300D BSOD on reboot after updates to Win7 64 bit

  Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

  I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
  I'm open to good ideas.

  Thanks much for this information.
  Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

  Welcome.

• Compaq CQ58 - 299EV model of updated video card and driver for win7 64 bit and ram upgrade

  Hello

  Since I was my compaq laptop (about a year), it was windows 7 64 bit operating system inside, even if the manual was for windows 8. So, when I looked up initially for up-to-date drivers I couldn't find support for win8, but I chose not to because I saw tons of compatibility issues with this model of laptop. Well I don't want to update soon, so I would like to know what are the latest drivers I can find for my model for win7 64-bit.

  So, what model of video card has it built in (it just says: "Intel(r) HD Graphics"), so I can find the right drivers for it?
  Also can I put my ram? There are now 2 GB.

  Thanks in advance.

  Since it is a Celeron processor it comes:

  Intel HD Graphics (on models with Intel Pentium or Celeron processor; supports DirectX 10)

  They don't give him a number. The processor is based on the Sandy Bridge architecture, so any driver for the video card HD 3000 series will work.

  Latest version of the Intel driver

  This can take up to 8 GB (2 x 4 GB) DDR3-1333 SO-DIMM, like this:

  http://www.Amazon.com/Samsung-PC3-10600-1333MHz-so-DIMM-upgrade/DP/B003XN3BZC/ref=sr_1_1?ie=UTF8&QID=1413330996&SR=8-1&keywords=DDR3-1333+so-DIMM

  Here is the Manual:

  Manual

  See page 45 for the upgrade procedure.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Windows Update stuck Win7 64 bit

  Research of the Internet and the knowledge base, it is clear that it is a very common problem, but still none of the solutions worked for me.

  It is a new installation of Windows 7 64-bit, as well as the drivers for the PC that came on its supplied driver CDROM.

  Windows Update 'Control upgrade' is "checking for updates... "with the progress bar cheerfully do his thing. And there it remains. Let all night and still no change, just loads of CPU devoured initially by TrustedInstaller, then by a svchost process.

  Closing Windows Update leaves the svchost still running at full blast - need to kill the process.

  Tried all sorts of things:

  Disable the firewall.

  Travel.

  In the IE options, add domains Windows Update to the Trusted Sites zone.

  Reregister the DLLs for Windows Update (actually instructions to do what Microsoft message turned out be specifically for 32 bit - half of them do not save on 64-bit using the provided controls).

  Run Fix - it.

  Run the Windows Update troubleshooting tool.

  The last was disconcerting because its results were not exactly consistent with everything first in every race, but finally, he moved to an error 0 x 80070005 (access) refused. Yes, I am the administrator.

  Using procmon on the loop of the svchost process did not reveal a lot - seems to spend most of his time reading HKCU with every 5th reading fault as follows:

  08:22:55.0768690 svchost.exe 3356 RegOpenKey HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate DO NAME NOT FOUND desired access: query value

  and every so often thrown in for good measure the following:

  08:22:51.9656215 svchost.exe 3356 RegOpenKey HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\RepositoryRestoreInProgress DO NAME NOT FOUND desired access: read

  Happy to create a core dump of any process anyone deems useful (although could do with a refresher - does years I used Dr. Watson or any of the other Win32 debugging tools).

  Thanks in advance for any help.

  Michael

  Happy to announce that the link I gave above (http://answers.microsoft.com/en-us/windows/forum/windows_7-update/after-clean-win7sp1-install-on-a-new-hard-drive/140fa9df-88ac-42e6-90f4-2fd635bbc91f) worked for me. I now have a system Win7 64-bit happily installation of Windows updates.  :)

  Michael

• Update on win7 32 bit pro volume license for win7 64 bit pro volume license

  I bought win7 32 bit pro volume license to exhibit 21 a few years ago.
  and if I want to switch to win7 64 bit pro volume to 21 parts license too.
  I intend to fresh install win7 64 bit without any previous 32-bit win7 backup.
  1. what should I do?
  2 and what is the cost?
  3. How can I get win7 pro 64 bit?
  4. Finally, my win7 MAK can activate 55 times, what should I do if I've exhausted all the?
  Thanks in advance

  Your Volume license is still active? If Yes, then you should have access to Volume License Service Center (VLSC) where you can download Windows 7 Professional 64-bit volume license media as appropriate. The same product key used to activate Windows 7 Professional 32 bit should work with the 64-bit version. Everything you change is the architecture.

  If it turns out that your multiple activation keys have been exhausted, then you must contact the Volume License Activation Center:

  2. get a MAK or KMS key by phone by the
  Worldwide activation call centers.

  If an organization exceeds the MAK activation limit, then its TI
  Professional can contact the activation call center to request
  other activations.

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• Win7 32-bit to 64-bit win7

  I use win7 32 bit and you want to install win7 64-bit, what is the procedure?

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  If you have the for 64-bit Windows 7 installation disc, follow these steps:

  Boot from the Windows 7 DVD

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• Satellite L450D - 13 X - upgrade memory, move from Win7 32 bit to 64 bit

  Hello
  IM new to this forum and need help. I have the laptop mentioned above and wish to update the memory, but I have not the slightest idea of what type to buy. When I checked the specifications of the laptop, that's what he said; "
  Standard system memory: 2 048 MB
  maximum extension: 8 192 MB
  technology: DDR2 RAM (800 MHz)

  Is someone can you please tell me what this means?

  Also how one I would go to switch from windows 7 32 bit to 64 bit. Would really appreciate someones help on that.
  Thank you

  This means that your laptop works with 2 GB of RAM. You can extend to 8GB and make faster and better. I ve checked specification and found the info you can use 2 x 4 GB for a maximum amount of RAM. Compatible 4 GB of RAM has PA3670U-1M4G part number.
  Click on the part number to order new modules.

  I ve also checked download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and your laptop is fully supported for Win7 64 bit. With other words, you need to install own Win7 64 bit version on your laptop. After having done that, you need to install all the necessary drivers, tools and utilities one by one.

  We can help you with this.

• Install of Win7 64 bit on Tecra M10 - 11V

  I have to update the Bios before a clean install of Win7 64 bit on my Tecra M10 - 11V?

  Should I regularly check and update the Bios?

  After installation the program "Toshiba Software Installer for Windows 7" find and update all the drivers and the necessary utilities?

  Thank you

  In my opinion you should not update BIOS. You have the latest version of BIOS 3.0 installed on your Tecra?

  Can you please tell us what you want to do exactly? You want to upgrade Vista preinstalled or you want to do the new install of Win7? If yes how do you do this? With the help of the Microsoft installation disc?

• X61T overheating slightly after upgrade to win7 64 bit

  Hello

  I just upgraded my X61t with a new SSD and Win7 Home 64 bit. But I noticed it's running more hot (temperature displayed by CoreTemp) than the previous Vista 32bits. While Vista 32 was about 60 with a maximum of 70 degrees, Win7 64 bit is mostly 70 with a maximum of 85.

  Is this normal? What worry, anyone seen this symptom with Win7 already? Maybe I should stay with 32 bit?

  What is the operating system or some driver missing?

  (I have the BIOS 1.25)

  Thank you

  Alex

  Hello

  After that a few days on Win7-64 is still no update from Windows Update, don't know why. Finally, I went with Win7-32 and updates quickly popped up, installed all the + all the stuff from Lenovo and it works ok now. It still runs hot sometimes (about 80) when the CPU is at full load, but otherwise seems normal.

  Thank you

• DAQCard-6062E and DAQmx on Win7 64 bit

  Hello world

  I have question about 6062E map (old enough).

  We had recently updating our machine to run Win7 64 bit, because we are short of memory with other applications. Now, I have the problem, that I don't get the DAQCard-6062E installed correctly.

  First and foremost, I must admit, that I don't have a great experience with this piece of hardware and the configuration of the old machine was made by someone else (which is over here).

  Our DAQ hardware is connected via a PCMCIA adapter to our new machine, running Win7 64 bit. This adapter is recognized correctly. I was also looking for drivers for the card itself and found the driver OR DAQmx 15.5 (http://www.ni.com/download/ni-daqmx-15.5/5901/en/), which seem to be supported for Win7 - 64 bit. So I installed them. Also our device is listed as supported by the latest version of DAQmx: "DAQCard-6062E.

  However, installation of the new machine I couldn't do the 6062E be recognized correctly. Windows not wanting to find/install the drivers for this card. Also the device does not appear in the NOR Measurement & Automation Explorer.

  Unfortunately, I couldn't find any useful information on the page host OR this fact. There is a fairly old (http://forums.ni.com/t5/Multifunction-DAQ/Does-DAQcard-6062E-work-on-WINDOWS-7/m-p/1104196) discussion in the forums, but it does not help be to this specific topic.

  I would be happy if you could point me in the right place on where to find this information? Or, please let me know, what things to do/try?

  Thank you

  Peter

  The DAQCard-6062E is not supported on 64-bit Windows versions. See the section "No supported devices in NOR-DAQmx on the 64-bit Windows 8.1/7/Vista Versions" of the NOR-DAQmx 15.5 Readme.

• HP laptop - 15-r101na: hp 15-r101na win7 64 bit usb does not work

  Hello

  I got hp 15-r101na to win 8.1 to win7 64-bit, and you have a huge problem, all the usb ports does not work (although they provide the power).

  I was unable to update the drivers through the "Device Manager", windows just not finding them.

  I tried to download the drivers from http://support.hp.com/us-en/product/HP-15-r100-Notebook-PC-series/7234951/model/7429481/drivers#Z7_M... , but it did not help.

  Maby someone could recommend third-party drivers, or another solution?

  best regard,

  ArnoldasGr.

  Hello:

  USB 3 of the HP 250 G2 driver should work...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5449369&swItemId=ob_132256_1&swEnvOid=4059

• Cannot run Microsoft Combat Flight Sim3 on Win7 64 bit.

  I am trying to run Microsoft Combat Flight Sim3 on Win7 64 bit. The program is installed, as well as the updates ACUpdate.exe and CFS3UpdateEng.exe, but when I click on the icon, I get, "the program cannot start because it could not find common.dll on the computer."

  I am trying to run Microsoft Combat Flight Sim3 on Win7 64 bit. The program is installed, as well as the updates ACUpdate.exe and CFS3UpdateEng.exe, but when I click on the icon, I get, "the program cannot start because it could not find common.dll on the computer."

  I found the solution on http://www.compilots.com/downloads/details.php?image_id=257. Download crack. Go to the default folder for MCFS3 under Program Files (x 86) /Microsoft Games / MCFS3 and move the file MCFS3.exe to a save location. Unzip the crack in the MCFS3 folder on drive C, right-click on the new .exe file and choose send to desktop as shortcut. You are in! Make sure that you have saved the original .exe file somewhere safe, it does not work for some.

• HP722c install on win7 64 bit

  Cannot get HP722C to install the new Win7 Pro 64 bit OS. I saw a long post on HP, on a 'bridge', but it assumes that the driver has been installed and that it simply does not work. I can't even a driver to install. The CD will not work, pilot is not on Win7 and HP will not download it from their site. They tell me it's on Win7, but I did twice as dance and he isn't here! Smarter than me knows how to do this 722C works on Win7 64 bit? Now tell me simply and slowly, that I have over 65!

  [Please DO NOT post multiple messages on the same topic.]  [As I composed this message, I see that you posted more than three requests for the same information...]

  There are in fact three separate issues to be addressed:

  1. Most of the Windows 7 computers have no parallel ports and the 722 Deskjet only supports a parallel port.  There are USB-parallel converters that can be used, but many of them do not support Windows 7.  Make sure that the converter (if you need it) supports Windows 7.  The Articles with the tag here have templates that users have reported success with Windows 7.  The port that you select will depend on the model you own, the port will usually USB001: or USB002:.
  2. The pilot is delivered via Windows Update.  Lately he has had a problem with the update to fail.  To check this follow these steps: click Start, devices and printers, add a printer to the local port, LPt1: (for now), then click on Windows Update and wait for the list to repopulate.  If you get an error "Windows could not get a list...". "then see the post here for a workaround.    Once Windows Update has completed and the list is filled again, select HP Deskjet 720, Next, Next, Finish.  (Do not print a test page to this point.)  You can now connect the cable from the printer, then right-click on the Deskjet 720 printer properties Ports and select the appropriate port.  [I have no way of knowing what will be the port for your system.  [Search for a USBnnn: port or see the documentation for your cable converter.] Once this complete and the printer appears in the devices file and printers, you can continue to the next step.
  3. Then, apply the patch available here that solves this problem of the spooler crash.