Windows 2008 Server Core - install VMware Tools

Similar Questions

• vCenter on Windows 2008 Server Core?

  I have searched all over the Internet (especially the VMware site), but couldn't find a yes/no answer to this question:

  Is vCenter installation on a Windows 2008 Server Core?

  And if not, why it wouldn't work?

  Thanks for your comments - I have faith that by the wealth of experience available on this forum, I will finally have my answer...

  as of today, Windows 2008 is not a host to vCenter operating system.

  http://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_compat_matrix.PDF

• Install MDSM on 2008 Server Core?

  Greetings, all. I intend to update some PE2950 systems connected to a MD3000 from Windows Server 2003 to 2008 Server Core system.

  I downloaded the latest CD of resources MD3000 (MD3000CD15.iso) and read the installation guide, which says to run setup.bat on mainframes. When I do that, passes prereq check and get a menu of this file, install SAS 5/E driver and install the storage software. I choose to install MD3000 storage software and get a language selection screen. After hitting OK for English, I get 'Installer User Interface Mode not supported""Failed to load and prepare the installation in graphical mode program."

  While the docs talk Core much they certainly state that it is possible to install MDSM. Help?

  Maybe someone knows the SMIA-WS32 command line switches - 02.71.36.09.exe perform a silent installation of 'Host '?

  See you soon.

  
  

• Cannot install VMWare tools on first installation of VMW Player for Windows

  Y at - it a tip to install VMWare Tools on VMW Player for Windows.  Tried as a Player 7.1.1 and 6.0.5.

  I downloaded the "darwin" and "windows versions" of tools with version management for versions of reader (for Player 6.05 6.05 tools).  But I don't know how to get VMWare to see downloaded files.  I connected the darwin.iso in the folder of the payload for the CD/DVD drive under settings of the virtual computer.

  I always get a dialog box with this message when I select install VMWare Tools in the menu:

  "Cannot find component on the update server. Contact VMware Support or your system administrator. »

  If you have the appropriate iso image attached to the guest, you have no need to use the "Install VMware Tools" menu - it's all that.  Go to comments and run the installation from the CD-ROM drive.

• VMware Workstation on Windows 2008 Server R2 9

  Can someone tell me if VMware Workstation 9 is supported running on Windows 2008 Server R2?

  And you cannot select your own criteria!

  

• Install VMWare tools on Windows 8 (x 86) - kill comments

  I'm a consumer of Windows 8 Preview x 86 VM (built manually as 'other', since easy install did not work - http://communities.vmware.com/thread/392887).

  It would be good to install VMWare Tools on this and it seems mentioned as a success, install so - of windows.iso:

  

  and then the comments screen goes... broken:

  

  At this point, it does not. Reset the prompt, it will boot (with splash screens, etc.), but then switch to a blank screen - then... not very interesting.

  VMWare Tools works on Windows 8 Preview of consumers (x 86)?

  Don't use 'other' for Windows 8 - that makes no sense - use rather Windows 7.

  And next time just jump the video driver and install vmware-tools with "custom option.

• VMware Workstation on WINDOWS 2008 SERVER SP1

  Hello

  I try to install VM Workstation 8 on a new install own dev server based on Windows 2008 server SP1...

  To almost the end of the installation, it indicates an error of installation of package and he roll back anything!

  I tried the same thing with Workstation 7 and gor the same kind of error...

  So I can't install worksation for evaluation!

  KR,

  AB

  Hello

  Try right clicking the configuration file and selecting 'run as administrator '.

  Kind regards

  Ian

• Install VMWare Tools running under VMWare Server 2 Server

  I have converted a physical server using VMWare converter 4.

  When I start VMWare server 2 using the vmdk file converted - I need to install VMWare tools on this server.

  How do I do that?

  If you return to vCenter Converter, which you can do it from another machine that installed him as long as he has access to hard and you .vmx files product, there is an option to "configure the Machine' rather than 'Convert the Machine' and this should allow installation of the tools in the image. If the converted image actually starts on the server 2.0 then there is an option in the web interface (https://yourserver:8333) to install VMware Tools when the prompt is selected in the left pane.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Cannot install VMWare Tools for Windows MCE

  Previously, I had Windows MCE installed and running on the VMware 1.x tools.

  I upgraded to VMware 2.0 and now I can't get the tools to install. When I click on "Install VMWare Tools", it brings up a window with the following in it:

  VMWare tools is not supported on this operating system.
  Check
  configuration of the virtual machine to make sure that the settings match to the
  operating system installed. See the documentation for more details
  on the guest operating systems supported.

  I checked the configuration of the virtual machine and this shows that the Windows operating system, as selected.

  I am running VMWare on Ubuntu 8.10, if that matters.

  Any suggestions?

  Thank you

  David

  Hello

  I compared it with mine and there are 2 major differences.

  First of all, I use older virtual material (version 4 instead of 7) but I do not expect that this is relevant to this problem. In addition, it makes little sense to use older virtual hardware unless your virtual machine must be compatible with VMware ESX. For example the old version of HW I use excludes the directx features, and you probably want to use.

  The other main difference is guestOS, in my version, it has the following value:

  guestOS = "winxppro"
  

  Could you try that and see if it helps?

  If this does not help then I'm afraid, we're going to need more details. In this case it might be useful to the vmware.log file loading

  One thing you might try must in any case completely re - install VMware tools in removing it first.

  In order to do not find themselves trapped by the windows activation logic or other inconveniences while experimenting, I recommend taking a backup of the virtual machine when it is completely stopped before doing anything else.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Installing Oracle database 11g Release 2 on Windows 2008 server

  Hi all
  
  Please can someone tell if Oracle 11 g 2 is installable on windows 2008 server? or Oracle plans to release a specific version for the Windows 2008?
  
  Thanks in advance.
  
  Bilal

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e10843/reqs.htm#CHDHGGFE

• Cannot install VMware Tools on Windows 10

  Having trouble installing VMware Tools on a Win10 business VM (vSphere 5.5). Installation lance then anything beyond that never reports. Is there something special that needs to be done to make this work?

  -Thank you

  Also have installed the Update Manager plugin that reports the status of inconsistent compliance.

  When you install the tools, you choose the Interactive installation or the Automated one?

  Try the Interactive installation instead.

  I also have a second comment from Andrew on Firewall/Antivirus possibly block Setup.  Try turning it off.  In addition, you may have to disable UAC.

• How to install VMware tools correctly on Linux Mint 15 cinnamon on Fusion 5.0.3

  Hello

  First of all, I understand that Linux Mint is not supported (side: anyone know if this will change?), so I appreciate any help.  My main problem is with the folders shared

  Dead ends

  So far, I've run into some dead ends:

  1. I watched install VMware Tools in Linux Mint 15 cinnamon (Olivia) - YouTube - but this facility has been the "'VMware Workstation 9.0.2 ' and the author admits"I don't know if it works or not with the fusion." "

  2 I downloaded a a copy of the latest vmwaretools for linux of deposit of CDS - /www/stage/session-32/cds/vmw-desktop/fusion/5.0.3/1040386/packages only to find it was exactly the same as the package vmwaretools this merger gives me at least VMwareTools - 9.2.2 - 893383
  

  Some success

  I had some mild success by running the following commands before installing - it seems to stop error messages:

  apt-get update
  sudo apt-get install build-essential
  sudo apt-get install linux-headers-`uname -r`
  sudo apt-get install xinetd
  

  But my MAJOR PROBLEM IS...

  When I try to activate the shared folders while the guest is running, I see a message:

  

  Or if I turn on shared folders when the guest does NOT work, I don't get an error message - but I don't see either record hgfs under/MNT

  Other research

  I read can't see the shared folders in Linux guest (Windows host) and Re: sharing files on drive betw host and the guest does not work on Ubuntu 13.04 and even tried to run the script vmtoolspatch of WoodyZ of this post - with the following result:

  user@GNS3WB62 /tmp/vmware-tools-distrib $ ./vmtoolspatch 
   
   
  patching file driver.c
  Reversed (or previously applied) patch detected!  Assume -R? [n] n
  Apply anyway? [n] y
  Hunk #1 FAILED at 152.
  Hunk #2 FAILED at 1978.
  Hunk #3 succeeded at 1962 (offset -71 lines).
  2 out of 3 hunks FAILED -- saving rejects to file driver.c.rej
  patching file inode.c
  Reversed (or previously applied) patch detected!  Assume -R? [n] n
  Apply anyway? [n] y
  Hunk #1 succeeded at 62 with fuzz 2 (offset 12 lines).
   
   
  To install VMware Tools type the following
  commands, pressing Enter after each:
   
   
  cd /tmp/vmware-tools-distrib
  sudo ./vmware-install.pl
  

  But after the installation of the VMware shared folders tools has not always worked.

  My plea

  Someone has successfully shared folder with Linux Mint 15 cinnamon (32 bit - no codecs) invited 5.0.3 fusion and if so could you share the steps that you used?

  My system Details

  I tried this using VMware Fusion 5.0.3 in both a

  MacMini running Lion Server (OS X 10.7.5) 2 GHz Intel Core i7 16 GB of DDR3 memory and a

  MacBook Pro running 2.8 GHz Intel Core Duo 8 GB DDR3 (OS X 10.8.4) Mountain Lion

  I have only this tried using Linux Mint 15 cinnamon (32 bit - no codecs)

  Well, starting with the basic installation created by using the linuxmint-15-cinnamon-dvd-nocodecs-32bit.iso image under VMware Fusion 5.0.3 I did the following.

  sudo apt - get install linux-headers-$(uname-r)

  sudo ln-s/usr/src/linux-headers-$ (uname-r)/include/generated/uapi/linux/version.h /usr/src/linux-headers-$(uname-r)/include/linux/version.h

  Excerpt from vmtoolspatch.zip in my Home Directory.

  Excerpt from the VMware Tools VMwareTools - 9.2.2 - 893683.tar.gz to: / tmp

  Open a Terminal, by default, the base directory, then:

  wkz@linuxmint15x86nc ~ $. / vmtoolspatch

  patch the file driver.c

  patching file inode.c

  To install VMware Tools, type the following command

  commands, pressing ENTER after each:

  CD/tmp/vmware-tools-distrib

  sudo./VMware-install.pl

  wkz@linuxmint15x86nc ~ $ cd/tmp/vmware-tools-distrib

  wkz@linuxmint15x86nc/tmp/vmware-tools-distrib $ sudo./vmware-install.pl

  Once VMware Tools have been installed, I rebooted and had access to the VMware shared folders.

  So it works with the basic install however I do not run apt - get update then apt - get upgrade or use one kernel other then the default.  So once the changes then the scrip may not work and I don't have time to test each variable and am just trying to give some automated solution just to make it easier to patch based on what is said in the Notes section in the script.  Really don't want to maintain it and others can build on this and or do something similar.

  Make sure that the stamp of Date/time on the file vmtoolspatch is Jul 15 00:04:00 2013 as who has worked with this test.

• Install VMWare Tools in W2008R2 - vmwareto.gtz

  Hello

  When you try to install vmware tools on a freshly installed server win2008r2 supposted to browser CD virtual to propose setup.exe shows two linux files: vmwareto.gtz and manifesto.

  How can I have the MSI 'setup.exe' pop-up here vmware tools?

  I also ESXi VSphere 4 Essentials Plus version 4.0.0 (hosts, vserver and vsphere client).  Should I move to the 4.0.1?  Any new functionality or important bugfixes or may continue with 4.0.0?

  Thanks for the comments on this

  concerning

  Tor

  Hello.

  When you try to install vmware tools on a freshly installed server win2008r2 supposted to browser CD virtual to propose setup.exe shows two linux files: vmwareto.gtz and manifesto.

  What have you selected for your Version of guest OS in the virtual machine settings?  That could be the cause of this problem.

  I also ESXi VSphere 4 Essentials Plus version 4.0.0 (hosts, vserver and vsphere client).  Should I move to the 4.0.1?  Any new functionality or important bugfixes or may continue with 4.0.0?

  4.0 U1 introduces support for Windows Server 2008 R2, so it would be a good thing to upgrade if you can.

  Good luck!

• error general system when installing vmware tools

  Hello world

  "I converted two servers today and it went well except that when I try to install vmware tools I get the message" an error General sysytem ' internal error.

  the windows.iso file is not in the folder vmimages sos I think that's the problem. is that correct? I have the vmware cd in the drive, no idea how to recover the iso in directory and this causes my error?

  My two vms have connections of 10 MB and I need them for Monday morning, any help is greatly appreciated. my support is with dell and they told me today they have no experts in vmware at the weekend? (ill b that resuming Monday morning to our account mgr)

  Hello

  Transferred to the virtual machine and OS forum comments.

  You get the error then 'install' or 'mount' the ISO image?

  Also, you go through and remove all equipment and unused hardware drivers of your virtual machine after the P2V?

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Cannot install VMware Tools.

  Hello

  my client have esx1 and esx2 - vSphere vCenter device 6.0 and 6.0 knots. When I try to install VMware tools on Windows Server vm = error:

  VIX 21001 = error code

  Cannot install VMware Tools. An error occurred trying to access the image file ' / usr/lib/vmware/isoimages/windows.iso ' to install VMware Tools: 2 (no such file or directory). If your product comes with the module of VMware tools, VMware ESX to reinstall, then try again to install the VMware Tools package in the virtual machine

  When I connect to esx1 via Putty and check ' usr/lib/vmware /-the 'isoimages' folder missing.»

  Please, what is faster solution?

  CZ THX

  Hello

  problem solved...

  I don't know why, but on esx1 - Local Direct USB access - declined, I restarted esx1 and now works perfectly

  so, I lost my network settings

  THX

  Tom