Windows 8 and native SDK

Similar Questions

• Native SDK and Simulator

  Hi all

  I have a problem. I can not connect the Simulator to BB10 native SDK. I opened the Simulator with vmware closed player.i wifi on Simulator. and I opened bb10 native sdk but the sdk does not discover/find it.

  How can I solve this problem?

  Best regards.

  Hello

  If you have problems with the Simulator in auto discover then the best way is to enter the IP address manually.

  This is how you do it.

  (1) on the MenuBar at the top of the Simulator, you see an icon between the time and date and the lock icon of orientation that resembles a head and shoulders with a gear wheel in the middle. Clicking on this will show you the State of development - make sure that the mode of development and save the specified IP address.

  (2) on Momentics go to the Perspective of System QNX (icon in the top right corner) and right-click on the sim card, select Properties. Enter the IP address.

  (3) after entering IP address, right-click sim again and select Connect. This should change the localhost not connected sim card just localhost and you should be good to go.

  Please let me know if it solves your problem.

  Graham

• Can I open a window in the native browser to an application and how?

  Hello everyone,

  I am currently on an application for the Playbook project and I am a bit stuck, I need to get the answers to these two questions:

  -Can I open a window in the native application browser and if so, how?

  -Can I I raise the bridge event to open an email in an application as it happens in a Web site after clicking on a link with a "mailto:" address and how?

  Thank you in advance!

  Kilian KLEIN.

  NavigateToURL to use for both.

  navigateToURL (new URLRequest ("http://google.com' "));
  navigateToURL (new URLRequest ("mailto:[email protected]"));

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/net/package.html

• How to install Blackberry 10 native SDK in Windows 8

  I try to start Blackberry10 setup under windows 8.je have downloaded bt Blackberry10 native SDK during installation, I get this error "error of Mode User Interface. Can someone help me how environment Blackberry 10 installation in Windows8 waterfalls

  Appreciate your link, but unfortunately it was useless, rather this link solved the problem

  http://www.online-tech-tips.com/Windows-8/run-a-program-in-compatibility-mode-in-Windows-8/

• What is the difference between native SDK and Cascades/qt?

  Hi all

  Can someone tell me what is the difference between native SDK and Cascades/QT?

  When I need to go to NativeSDK and when I go to waterfalls?

  These two works in BB 10 or only Tablet?

  Please delete me, I can't live without knowing this.

  Thanks in advance.

  Hi Smiley,

  Yes, you need to install the two NDKs. They coexist and separate IDEs and install files.

  See you soon

  Swann

• How to uninstall previous native SDK

  Hi, I would like to uninstall previous SDK on eclipse, how to do?

  Before I uninstall, when there is a new SDK, and there is a list to uninstall

  ex: I want to uninstall Blackberry native SDK 10.0.10.261 (on the drop down menu on eclipse)

  How to do this?

  Thank you

  I guess you mean Momentics not slip away, as if one is based on the other, what I suggest is not the same in eclipse.

  (1) open-> preferences from the menu window

  (2) select Install/updates

  (3) click on 'uninstall or update' ink

  (4) select the one you want to remove and click on uninstall

• HP Pavilion p7-1423w: so I just had Windows 7 and many

  Is there any driver I need for Windows 7 that will make the front USB Ports work or some update from Microsoft that will allow the front USB ports work?

  The machine is a HP Pavilion p7-1423w who has used to have Windows 8 and Windows 8, the front USB Ports work on this OS, so how can I make them work under Windows 7?

  GOTCHA.
  Microsoft Windows 7 is released to the General Public on October 22, 2009
  Windows 7 Service Pack 1 (SP1) was released on February 22, 2011.

  Your HP Pavilion p7-1423w has been released for retail sale, 27 September 2012
  http://support.HP.com/us-en/document/c03517270

  THUS, Native MS Windows 7 SP1 doesn't know anything about the card mother Foxconn H-Joshua-H61-mATX (name of Code from HP; Joshua).
  http://support.HP.com/us-en/document/c03135925

  Additional HP drivers or OEM supplier should be loaded for Windows 7.
  ===
  HP Pavilion p7-1423w PC Desktop (Drivers) Support - NOTE: Windows 7 is not listed.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & jumpid = reg_r1002_usen_c-001_title_r0003 & lc = in & product = 5297036 &

  HP recommends not downshift / downgrading Windows 8/8.1 Computers retail,
  as your HP retail Wal-Mart computer.
  ===
  Backdoor SOLUTION: You can use Windows 7 (64 bit) drivers for desktop HP Pavilion p7 - 1370t for lack of hardware drivers.

  WHY it works?
  Your HP p7-1423w desktop computer uses the same card mother of Joshua Foxconn/HP
  as this HP p7 - 1370t computer CTO of office.

  Windows 7 (64 bit) drivers have not been updated since mid-2012.

  Desktop HP Pavilion p7 - 1370t CTO: Support (drivers)
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & docname = c03135925 & lc = on & os = 4063 & product = 5197676 & sw_lang = &

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• U2415, around the gap between the Windows desktop and the edge of the monitor (bezel)

  Hello

  I have a Dell Ultrasharp U2415. I've read all the FAQS and I know I have to perform the SUBMISSION, but before doing so, I just want to know if it is normal to have a gap between the Windows desktop and the edge of the screen. If the Windows desktop is not covering or fill the entire screen. There all around the smaller than a 1/4 "gap between the edge of the windows desktop on the edge of the bezel of the monitor, and this model has almost no bezel. The graphics settings in Windows 10 are set to use the native resolution of 1920 x 1200 monitor. I tried with different computers (all windows 10), and the drivers are up to date. The monitor is connected via HDMI since I don't have portable computers not with DP interfaces. Laptop computers have Intel and ATI video cards. I have check the put option to scale on the video card software and it is set to 100%. So, is this gap normal? Is the edge Office Windows 10 supposed to touch the physical edge of monitors?  If the gap is not normal, I will perform the integrated test.

  TIA!

  Based on the YouTube comments, which seems to be normal. "But you must run the APPLICATION to see if the"smaller than 1/4"gap" appears. If Yes, then we can say that it is normal. If this is not the case, then some settings of the operating system is the culprit.

• I uninstalled windows 10 and installed windows 7 again but it's not getting updates

  I uninstalled windows 10 and installed windows 7 again but it's not getting updates

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Not able to download BB 10 native SDK

  Not able to download the native SDK BB10 or momentics IDE of

  https://developer.blackberry.com/native/downloads/ , the same page opens again and again.

  What is the correct link, I can download it

  Thank you

  Maria

  The download page is now fixed.  Let me know if you see additional problems.

• Native SDK is suitable for text-based application?

  I write an application based on the text for Playbook. I read the libraries and learning native SDK for the last days. Now I can't find an easy way to 'draw' texts on the screen of the playbook.

  Please give me some pointers or suggestions.

  If native SDK do not, let me know related libraries or knowledge that I need to look for.

  If the native SDK is not appropriate, what development tool would you suggest me to use? HTML5 or something else? And why?

  I'm new to this forum and new to playbook.

  Thank you.

  Native development kit is not really appropriate, unless you are ready to use the libraries of the add-on as the port of Qt, which is perhaps still a work in progress. The NDK for target now is mainly to games or other applications for which should be essentially generate UI whole 'manually '.

  HTML5 can obviously manage text. So can air. I can't recommend one over the other, or any other environment for you, since "text-based application" is not really describe what you are trying to reach.

• Backward compatibility of Native SDK 2.0 app?

  Hi, I've recently compiled my application with Native SDK 2.0 beta 2 and his work now uses the Beta firmware 2.0 OS, but when I try to run it on pre 2.0 firmware like 1.0.8.1971 its gives me the following error:

  result::failure 533 system request - requires: forbidden version, want (2, 0, 0, 0) (1, 0, 8, 1971)

  I found the tag on xml and tried to change it to 1.0.0.0 and it can be installed, but it crashes immediately after I try to open it.

  Anyone know how this works?, or if there is no official information about this that I'm missing?

  When you submit the app at AppWorld you should have a choice to define minimum OS version, which would limit what versions of your app people would see

• How to submit the app for BlackBerry World who thrive on BlackBerry native SDK

  Hi all

  I am complete create application on BlackBerry native SDK and want to deposit app World de BlackBerry. But I didn't know how to prepare the file to submit.

  Could you suggest how to do it please?

  Kind regards

  Nutthakorn

  you build the "device-Release" project, which creates the bar file in the folder "release".
  This file must be signed and submitted.

• Cannot compile the sample applications with the native SDK BB10

  Hello

  I downloaded the BB10 (10.0.4) native SDK and the sample application pack. However, some of the sample apps fail to compile (AudioControl and BelligerentBlocks, for example). The target isn't the playbook (Simulator).

  I get an error do the following:

  make [2]: * [C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7/AudioControl] error 1
  make [1]: * [all] error 2
  make: * [all] error 2

  Looking at the newspapers of generation, I receive the following linker error:

  'C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7 '.
  C:\bbndk-10.0.4-beta\host\win32\x86\usr\bin\ntoarm-ld: Notes: 'screen_get_window_property_pv' is defined in DSO C:/bbndk-10.0.4-beta/target/qnx6/armle-v7/usr/lib/libscreen.so.1 try so add to the linker command line
  make [1]:

  Am I missing something obvious? I'm competely new to makefiles, so if anyone has a suggestion, it would be welcome.

  Thank you.

  The latest NDK for Playbook is available from: //developer.blackberry.com/native/download/

  For waterfalls NDK 10.0.4, follow the instructions in Momentics content/getting started/Getting Started Guide Help/help / install and set up the Simulator