Windows 8 Pro shows Test Mode Build 9200 above the clock even after activation

Similar Questions

• Desktop Windows 8 PRO has a 'Windows 8 PRO with media center Build 9200' text,

  Original title: Windows 8 PRO.

  Good day, I was talking with my friend about I want to buy the Windows 8 PRO, so it make the "favor" to see in the internet a series of Windows 8 PRO cracked and 'validate', so I have my office have a text: "Windows 8 PRO with media center Build 9200", I want to restore my normal version of Windows 8, which is original.

  I try using to refresh the pc, but does not work.

  Thank you and have a nice day.

  If the computer came with Windows 8.0/8.1 so if you have a DVD, or recovery Partition do a factory restore it will be the same as it was when you the activated. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it is

  employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• I have windows xp pro. whenever I try to minimize all the windows they don't show in my taskbar.

  I have windows xp pro. whenever I try to minimize all the windows they don't show in my taskbar.

  You have only one monitor and your system is configured to use a single monitor?

  This can occur if you have several configured monitors and one of them are not connected or are turned off that you can't see reduced tasks.

  Whatever it is, you should be able to see a task enlarged, restored or minimized (unless the application has been configured to hide the task in the task bar).

• That you can download to windows 7 pro to get media player to allow the photos to be sent by email

  That you can download to windows 7 pro to get media player to allow the photos to be sent by email

  Send worms and Mailto commands do work only with the help of an as Windows Live Mail, Thunderbird email client, etc. The one you use for mail, nothing prevents you to start a new message, then by attaching photos.

• Windows XP Pro SP3 slow navigation and performance of the Internet network

  I am running a Windows SBS 2008 domain with 70 clients - many of which are Windows 7 Pro (and not affected by performance problems) and other clients are Windows XP Pro.  Recently, apply 2 updates to all Windows XP clients to a problem of double authentication with RDP Server 2008 platform - two updates are http://support.microsoft.com/kb/969084 (install the RDC 7.0 client upgrade) and http://support.microsoft.com/kb/951608 (adds the registry entry in Windows XP to enable CredSSP).  Now, the patches of handsets allow RDP clients to Server 2008 platform and enter the credentials of the user only once.

  However, given that these updates have been applied, about 7 of 20 Windows XP clients are extremely slow performance when searching for network resources (sharing drives, Outlook / MS Exchange and Internet browsing synchronization).  Not sure if the 2 patches are coincedental or related.  I tried rewriting changes from two patches, drivers NETWORK card and even tried to replace the NETWORK adapter with new ones.  No change in performance.

  However, can I uninstall / reboot / reinstall the Client of Microsoft Networks and clients perform as expected.  Over time (sometimes), the problem reappears.  I have been through the event logs and don't see any errors that indicate a failure to communicate on the network.  All clients receive assignments IP from the DHCP server and updates are managed via WSUS.

  Ideas or recommendations would be greatly appreciated.

  Hello DCAggie,

  Because you are on an area of activity, please transfer this issue to the address provided below on the Microsoft TechNet forums.

  Windows XP IT Pro

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  Thank you

  James

• I can validate a sticker/Windows 7 Pro OA installation product key FRONT of the BONE?

  Hi all

  I bought a 2nd hand PC that has windows XP on, but I want now to remove it and install Windows 7.

  Curiously, the PC had original Windows 7 Pro OA sticker with the product key (my guess is that windows XP has been installed then it was a PC ex).

  My question is: is there a way to check if the product key is valid before installing Windows 7 Pro, because I don't want to install Windows 7 Professional, only to find out that for some reason any key is invalid and I have to re - install Windows XP.

  A big thank you to all for reading (and I hope to answer to) this question.

  No, you can not determine if it is valid or not, but just the fact that it is a Windows 7 Pro COA attached to the machine he could prove the validity.

• need to update from XP home to Windows 7 Pro and do not want to lose the software I loaded

  Original title:

  Fusion on Mac

  I need to move from XP home to Windows 7 Pro on the side of the merger of my Mac. I have 3 computers I have to do this on.  Then I load the full version and not lose the software I have on the side of the fusion of windows or do I have to use the upgrade. If I lose the software I have loaded I have to buy it again.

  I'm sorry for there is no way to upgrade Windows XP to Windows 7 that can keep your installed programs.  By using the full path or upgrade doesn't make no difference in this regard.

• Music app on Windows 8 Pro crashing when trying to listen to the music of Xbox

  I do not have a passage of music Xbox but the music in Windows 8 Pro app seems to provide free streaming without a pass. I mean, because I don't have the option to preview the songs online, I can't play these, full versions. But when I try to play songs or albums, the application crashes without error indicated.

  UPDATE: uninstall and reinstall the app music fixed that! at least for now. Will have to see if it can withstand a restart.
   
  UPDATE 2: it wasn't sleep extended a laptop. Same thing is happening again...

  Here is the log of the Windows Event Viewer error:

  DisplayName Music

  ApplicationName Microsoft.ZuneMusic

  AppUserModelId Microsoft.ZuneMusic_8wekyb3d8bbwe! Microsoft.ZuneMusic

  PackageFullName Microsoft.ZuneMusic_1.1.134.0_x64__8wekyb3d8bbwe

  ProcessId 3432

  ErrorDescription Could not complete the operation due to error 80041000.

  DocumentFile main.html

  StackTrace Error: Could not complete the operation due to error 80041000. to processDocument (ms - appx://microsoft.winjs.1.0/js/base.js:4798:10) to the anonymous function (ms - appx://microsoft.winjs.1.0/js/base.js:4724:22) to notifySuccess (ms - appx://microsoft.winjs.1.0/js/base.js:1404:22) at the entrance (ms - appx://microsoft.winjs.1.0/js/base.js:1091:22) to _run (ms - appx://microsoft.winjs.1.0/js/base.js:1307:18) to _completed (ms - appx://microsoft.winjs.1.0/js/base.js:1275:14) to onreadystatechange (ms - appx://microsoft.winjs.1.0/js/base.js:2322:34)

  Here is my experience with this problem:

  I was unable to broadcast from these Windows 8 apps: XBOX, Netflix, Hulu and XBOX Music video.

  I don't think it was the video drivers because it was also ruin the music app , but it was the video drivers. I laughed heartily after I fixed the first problem when I broadcast a song and a great video ad full screen has started playing. That's why I think that Moshen Kamalzadeh became only the accident sometimes, because the announcement does not play every time.

  I've BEEN using:

  AMD Catalyst 12.6 Legacy Driver for Windows 8

  I solved this problem (and probably caused more problems I'll know later) by uninstalling these drivers and will allllllllll the way back to 11.10

  x 86: http://drivers.softpedia.com/progDownload/AMD-Catalyst-Display-Driver-1110-for-Vista-Windows-7-Download-138558.html

  x 64: http://drivers.softpedia.com/get/GRAPHICS-BOARD/AMD/AMD-Catalyst-Display-Driver-1110-for-Vista64-Windows-7-x64.shtml

  Hope this helps

• Windows 7 (pro?) will not be connected to the non - Internet

  Summary: We do a workshop where we have set up a private network that is not connected to the Internet. We have a fleet of laptops (11 of them) that connect through an open wifi router. The router provides DHCP, and there is also a web server and database on the network server.

  We have laptops with Windows XP and Linux, as well as the Chromebook and Macs. Connect regularly and reliably. However, we had three different Windows 7 laptops of three completely different companies with the same problem. They will connect at first, but then get into a never-ending display of 'limited internet access' cycle, disconnection and reconnection.

  All three of these laptops work very well on all other wireless networks. One of the laptops is Win7 Ultimate 64-bit (not sure the others). Now, this laptop used to work perfectly, but still has this problem. Some other Windows 7 laptops have worked in the past.

  Computers portable Win7 will connect and work very well with a wired connection.

  Then... It is not a problem with the router or the network, since any computer non-Win7 laptop works perfectly. The router is started fees at each workshop, and the problem persists, but * only * on some Windows 7 laptops.

  It is probably not a problem of drivers or virus, given that laptops work fine on other networks.

  We tried to adjust our network "Preferred" and "Connect automatically" in Win7 - no joy.

  Windows 7 has a certain logic that causes the disconnection of a wireless network if he does not have an Internet connection?

  Hello

  Thanks for posting your query in Microsoft Community.

  Your question is about the web and database servers, I recommend you to post your question in the Microsoft TechNet forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• The tab 'fonts' & 'file' in the creative cloud window shows only a wheel of continuous rotation. Even after leaving the window open all night, he showed nothing. I went in the OOBE folder and tried to remove the button Delete the opm.db file, but it i

  I was never able to access these features in the window of creative cloud. I tried to access the OOBE folder to remove the file from opm.db to . There is no file opm.db. I followed the advice from another thread and delete the contents of the OOBE folder. This did not solve my problem. I left the window of creative cloud open for a whole day hoping that would solve the problem. He did not. Thanks for any help you can provide this issue.

  Thomasc11484006 have you tried to run the uninstall program Adobe Creative Cloud desktop application and then put it back?  Instructions and the uninstall program can be found at code error 2 or 50: Creative Cloud desktop application update doesn't have.  You can then reinstall the application using the steps listed in download and install Adobe Creative cloud appscreative cloud.  We invite you to update this discussion if you have any questions about the steps that are listed in each document.

• Windows Update has encountered an error and cannot display the requested page after that I click on express update.

  Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

  Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

  Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• DPS App Builder: Created App is not available after activation

  That's what I did:

  1 created an application in the DPS App Builder

  2 activate the application with my serial number for simple editing

  3. download the version of app development

  4 tests

  5. mounting of the folio

  6. creating another development in the DPS App Builder application

  Here's the problem:

  1. There is no first version of the application (with serial number enabled) available in the DPS application builder

  2. I can't use the serial number, once again, because it is already activated

  Additional information (maybe useful):

  1. I opened https://digitalpublishing.acrobat.com and identify yourself. If I check the download for the DPS App Builder it is said, that there was no App Builder not found on my system. In other words, of course, not true.

  2. I use a different adobe ID to work with DPS and creating folios I used for licening CS 5.5...

  3. I reinstalled the DPS App Builder after discovering, that enabled application has disappeared.

  My question:

  1. How can I find the application enabled and disable serial number?

  2. How can I make sure, that the new app disappear?

  Thanks in advance and best regards

  Florian

  Hi Florian.

  I can help you, please PM me the email ID used to connect to the application builder to activate your app

  Thank you

  Lohrii

• Test server tries to use the old IDs after reboot etc.

  I have just formatted my drive and installed fresh xampp, pulled my web files on the net and got the testing running server.  I can access the pages that use my vidiscript DB, but for some reason when I try to access pages that use the same PB it gives me an error of:

  Access denied for user 'deafboyz_admin'@'localhost' (using password: YES)

  deafboyz_admin is the OLD username for DB, that my remote DB uses, which is painfully different than the testing server.  I updated the DB file and saved and made sure it's correct on the test server.  Restart xampp and even my computer, deleted history of cookies etc and still get this same error.  It makes me crazy b/c my main homepage must use the db file for data and it works perfectly, but video pages it attempts to use the old credentials, which are not loaded in my test server.

  as a solution, I even added the user deafboyz_admin in the db and gave full privileges, reboot, etc and still no luck.

  all my passwords are loaded into the local Database as they are in the file db.  restarted the computer and clear the history, what else could be possibly originally xampp try using the old db details?

  Thank you for your understanding!

  There is always something that connects your video to a file that is trying to connect to the DB by using the credentials of the old. You can share your PHP code with us login script? Also, check that the connection on the video page setting is correctly set in the correct file that contains the new credentials.