Windows could not detect a dial-up modem

Similar Questions

• Windows could not detect all the wired or wireless [XP] network cards

  Hello
  Recently, I put in a new HARD drive but can't get online at all. Make a diagnosis of the State in Internet Explorer Tools, I got this:

  http://Tinypic.com/r/2qi4sae/5

  and

  http://Tinypic.com/r/11vthma/5

  I am at a loss here, any help much appreciated. Thanks for your time.

  Concerning

  Hello

  I suggest you to return these KB articles and check if it helps:

  http://support.Microsoft.com/kb/315275

  http://support.Microsoft.com/kb/325487

  It will be useful.

• Windows could not automatically detects the network proxy settings

  Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

  (This message is intended for all problem reports)

  Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

  Search for malware, especially using malwarebytes.

  Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

  netsh winsock reset
  netsh int ipv4 reset

  If they do not help, please after the output of a command ipconfig/all-order

• HP Pavilion g7-2043sf: Windows could not find a driver for your network card

  Model: HP Pavilion g7-2043sf

  Product number: B1P51EA #ABF

  Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

  Windows could not find a driver for your network card
  Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
  Install a driver for your network card
   
  Collection information
  Windows Version: 6.1
  Architecture: amd64
  Time: Thursday, December 24, 2015 12:34:16

  In Control Panel, I found this information:

  Ethernet controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

  I need all drivers of network?

  Thank you.

  Hello:

  You need these drivers...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55979.exe

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp58586.exe

• can not get the wireless network... saying "windows could not find a certificate to log in to a network.

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Thanks for posting. Follow the instructions below carefully.

  1. Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
  2. Scroll down to network adapters. Develop the content by clicking on the symbol +.
  3. Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
  4. Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• Unable to format the memory card, I get the message "windows could not format.

  Original title: car micro sd problem
  
  Hello
  my laptop detects the memory card (after a good dose of refreshing it), but whenever I try to open it or scan or format, any area 'my computer' freezes. and, now my phone displays the message "no inserted memory card. I use a dell inspiron 1525 with windows vista sp2 with 3 GB of ram and and 230 GB hard drive.
  to get you in the loop, the songs on my memory card using previously to disappear on their own or used to go corrupt, so I decided to scan it. now, when I insert in my lappy, im facing this new problem. kindly helppppppppp me.
  PS - after several attempts, I had the option to put in shape, but after clicking on the option, I get the message "windows could not format.

  Hello

  You are able to use any other memory card with no problems on the same computer?

  Try to format it on another computer and check. If you are unable to format it on another computer then it is perhaps because of the corrupted memory card. You will need to contact the manufacturer for assistance.

• Can not solve the problem "Windows could not find a certificate...". ».

  I read through all the posts related to "Windows could not find a certificate...". "but still failed to get a solution for my problem.

  Well, I have no problem with the installation of this modem to router Wireless G ADSL2 + for both my notebooks of Vista, they work perfectly.

  However, I have difficulties with 2 other computers that move on the XP version. This version XP 2 PCs sometimes show the connection of the signal very strong to my network and sometimes simply shows "Windows could not find a certicate to connect to the network.

  Even when it indicates strong signal to my network connection, I can still surf the internet/LAN.  Where is the problem?

  Can anyone help?

  Thanks for the reply.

  Nonetheless, I have chosen the way easier and solved the problem.

  Connect the network cables for these 2 not for PC XP update and they work just as perfect as my other 2 portable VISTA wireless.

• Bluetooth could not detect any device

  My Device Manager could not detect the bluetooth device. and if I search my bluetooth icon bluetooth device, it pairs with my device bluetooth and shows connected but after awhile, it shows not connected.

  HP model p027tx, windows 8.1

  Please help me.

  Hey Afonso-abs,.

  Thanks for the update.

  Try this:

  1. Go to devices and printers.
  2. Right click on the device icon and select control.
  3. Click on sign out and then sign in.

  Also, make sure that both your phone and Bluetooth hardware is on detectable.

  Your computer may be defined as detectable by right-clicking on the Bluetooth icon in the system tray, click on show settings and check the Allow Bluetooth devices to find this PC box.

  Let me know if it helps.

• Windows could not get a list of devices from Windows Update. Try again later

  Original title: Windows 7 list printers cannot be updated
  I installed a windows 32 bit 7 OS several weeks ago on my workstation Futitsu-Siemens and followed the instructions on the HP Wizard to try to install the HP Deskjet 990c printer driver for my HP 6122 printer. According to the HP Wizard, the only way to do is to update the list of printers by clicking on the "Windows Update" button in the dialog "add a printer".  I clicked on this button several dozen times in recent weeks, and every time I get the message "Windows could not get a list of devices from Windows Update. Try again later.

  I installed a windows 32 bit 7 BONES of several months on my HP laptop and the printer list updated without a hitch to include many more HP printers that are on my computer Futitsu-Siemens including HP 990c.

  What should I do?

  Here's what I found my system which is an Z210 64 HP running windows7. I just updated my Bios to v1.35

  What I did to get the update to work once and what I have to do each time to add another printer by using the Update window.

  1. open (Ctrl-Alt-Del) Task Manager

  2. click on tab of abuse, then Services button (bottom-right)

  3. under the name to find "Windows Update".

  4. right click "Windows Update" and select stop. do not close

  5. open the Exploper window and browse to C:\Windows

  6 delete the folder "C:\Windows\SoftwareDistribution".

  7. go back to served, right click on "Windows Update", and then select start

  Now the "Windows Update" button should work. For me I have to do every time I have to install a printer that requires me to use windows update

  Looking for what casues the error

  at the bottom of a file named WindowUpdate.log located in C:\Windows after that I get the message "Windows was unabel to...» "I have this text below.

  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * START * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * Online = Yes; Ignore download priority = No
  2012-04-30 14:20:18:782 284 5cc Agent * criteria = "Type ="Driver"and DeploymentAction = 'Installation' and DriverClass = 'Printer' and DriverMatch = 'Catalogue'"
  2012-04-30 14:20:18:782 284 5cc Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2012-04-30 14:20:18:782 284 5cc Agent * scope of search = {Machine}
  2012-04-30 14:20:19:952 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:19:952 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:20:030 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc PT +++ PT: Synchronizing server updates +++
  2012-04-30 14:20:20:030 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:22:183 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:183 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:214 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc PT +++ PT: synchronization of applicable printers +++
  2012-04-30 14:20:22:214 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SyncPrinterCatalog failed, error is 0x8024400D, the soap client error = 7, soap = 300, HTTP = 200 status code error code
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SOAP fault: 0x00012c
  2012-04-30 14:20:23:072 284 5cc PT WARNING: faultstring:Fault has occurred
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ErrorCode:InvalidParameters (7)
  2012-04-30 14:20:23:072 284 5cc PT WARNING: Message: printerUpdateIDs
  "" 2012-04-30 14:20:23:072 284 5cc PT WARNING: method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncPrinterCatalog"
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ID:fd5a6897-e20b-4a8f-a118-c9c791da6851
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:150 284 72 c to THE cannot perform scan non-interactive if AU is interactive only
  2012-04-30 14:20:23:150 284 5cc Agent * found 0 updates and 17 categories of research; rules apply rated 193 on 660 deployed entities
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:23:150 284 5cc Agent * END * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:28:162 284 5cc report REPORT EVENT: {C7177063-6BAB-4A17-AC0B-74B0D47355FA} 2012-04-30 14:20:23:150 - 0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 success CDM Windows Update Client synchronization software detected 0 updates successfully.
  2012-04-30 14:20:28:162 284 5cc CWERReporter finish event management report. (00000000)

• Windows could not start the service Windows search on the computer Local (Error 1053)

  Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

  I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

  I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

  I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

  ---------------------------
  Services
  ---------------------------
  Windows could not start the Windows Search service on Local computer.

  Error 1053: The service did not demand launch or control in a timely

  I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

  Yep, http://www41.zippyshare.com/v/30503880/file.html

  Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• "Windows could not get a list of devices from windows update"

  I've been looking for a solution for several weeks now. Many people seem to have the same problem. But no one has yet been able to solve the problem.

  First of all, let me clarify the problem explicitly:

  In the Add Printer Wizard: "Windows could not get a list of devices from windows update"

  Specifically, the problem is that Windows Update *broken* in the Add Printer Wizard. (Windows Update, otherwise works fine. But not in the Add Printer Wizard.)

  Find a workaround to add the printer, which mostly does not work what I have read, would be only to solve the secondary problem of the addition of this printer. Except, it would not solve the main problem which is Windows Update *broken* in the Add Printer Wizard.

  Details:

  I have been setting up three new PC running Windows 7 Pro 64-bit. I had to add an old LaserJet 5if connected to a former print server. I created the IP Standard port, then clicked on the "Windows Update" button to update the list of printers. It worked on the first perfectly, as it has in the past with other computers to this place. Then I started to work on the other two at the same time. I'm lazy and started to perform several tasks such as installation of MS Office, Security Essentials (less than 10 units at this office, BTW), etc. while the Add Printer Wizard was updating the list of devices. One of these things, I can't remember which, required a reboot.

  And that is where I am certain that things broke. Restart has occurred while the two computers are in the middle of the list of loading from Windows Update System. I not interrupted the first PC. But the other two were interrupted and now they can't get a current list of Windows Update.

  I tried the FixIt tool at http://support.microsoft.com/kb/971058 . He says he detects a problem and claims to have fixed. Except, it isn't - little matter how many times I run.

  Ideally, the FixIt tool above must be updated or a new tool must be created by Microsoft to resolve this particular problem. Type of the error in any search engine, and you will see this question from several years back. It's happens often enough to justify the creation of Microsoft or update a FixIt tool.

  Any thoughts would be helpful.

  I have exactly and that no ONE reads what you say or what other people say everywhere. Only the upgrade Assistant printer does not... The update of the Printer Wizard do not work. Windows Update works fine.

  Ronday,
  You are right that if few people read what they respond to these forums. That's the kind of non-response, I found everywhere on the Internet about this issue. (The value of the community is sometimes over-rated, if you ask me). Apparently, using characters fat is not enough to focus on the fact that the issue is not with the printer compatibility since, as I said clearly A) this printer has installed fine several times in the past with the same OS and in the same office and B) that I clearly THE issue is that updated the list of devices , in the Printer Wizard, *Do NOT*!  
  However, I came across a suggestion on another site. I haven't had the chance to try it at the location of this particular customer - I'll do it later this month. Here is the link to the suggestion for you to try as well. Scroll to the end to ignore any non-response:
  http://www.techsupportforum.com/forums/F217/Windows-Update-not-updating-632025.html
  'Michel' made the following suggestion:
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Hi, most likely caused by one installation failed (not the Wizard), you need to do a bit of detective work, lets first try the easy solution: -.

  1. go to start, run and type regedit.

  2. go to the registry editor for

  HKLM\software\microsoft\windows\current version\installer\inprogress.

  3. click the inprogress key and note the name of the file contained on the

  right to databasepath (must be .msi extension).

  4 rename inprogress oldinprogress.

  5. close the registry editor.

  6. open my computer.

  7. navigate to C:\Windows\Installer (Installer file is hidden by)

  par_defaut, views folder check "show files and folders" also uncheck "Hide protected system files", do not forget to cancel it when you're done)) and rename the file noted in step 3.

  8 restart the computer and try the installation again.
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  If it works, then Michel deserves all the accessories. At least he or she tries to solve the real problem.

• Windows could not search for new updates after the troubleshooting and repair of updates

  My computer Windows 8 began to refuse to install windows updates.  I've been through the troubleshooting steps in Help and online.

  Now, what I mean is "Windows could not search for new updates", code 80073712.

  Troubleshooting Windows Update tool, solve problems as an administrator, gives:

  Error Windows Update Database that can be detected 0 x 80073712... Fixed.

  Windows Update components and need to be repaired... Fixed.

  I'm skeptical about the 'Fixed' part, because if you run it again... he finds and it 'fixed' the same problem.

  DISM.exe/online/Cleanup-image /Restorehealth and /scanhealth the two report error 14098: component store has been corrupted.

  Feel free to ask me questions to debug it, I'm fairly technical...

  Hello

  You can try this fix based on Windows PowerShell and see if that helps:

  http://www.kapilarya.com/fix-Windows-8-1-Unable-to-check-for-new-Windows-updates

  Hope this helps, good luck :)

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."