Windows crashes and stops working (windows vista Home premium, Proc.AMD Athlon)

Similar Questions

• PS/2 mouse stops working on Vista home Premium.

  OK, so I bought a computer, an HP with Vista Home Premium, and (despite all the horror stories, I got friends who use Vista) it worked like a charm. Things were a lot until one evening when my mouse (a three buttons not optical with scroll) has stopped working. It was as if he was not yet connected. I rebooted the computer and the mouse worked fine for a minute or two, then it dies again. I tried to check my computer to find errors and he found, and I have never recived any other error that the fact that I have automatic updates turned off, because I'm on the internet by satellite and I am limited to a certain amount of bandwidth. But back to my problem: I tried a USB mouse and it worked, but it made me even more problems. You see, I have set up wireless network, and I use a wireless USB adapter. However, when I started using the USB mouse, it has messed up my network connection. The computer wouldn't connect to the network, even if I wasgiving it the password correct and everything. I tried another card, and same problem, it always says that the password is wrong, and it would not attempt to open a session on the network, comes immediately coming with the error message. Well, after some time of dinking autour with her, I did finally find the mouse by lightning to work. However, now it is down again. I'm sick and tired of having to borrow the mouse USB of my friend, WTF I do? And please don't tell me to buy something, because I'm here to solve a problem, for not giving Microsoft (or someone else) more of my hard earned money.

  Hi Roadkill1992,

  Thank you for your message.

  You may want to refrain from downloading pirated software.

  Any number of bad things can happen to this activity.

  If it does not work on other computers, but not yours, I think you're right about the driver.

  You can also try a different PS/2 mouse into this port on your computer to see if it is a failure.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Restore factory settings doesn't work does not and did not reinstall Vista drive, download Windows Vista Home Premium

  Original title: Vista

  I need to re download windows vista home premium because: 1-workstation is not come with a disk and 2 - my system back to factory settings does not work

  Hello

  Here are the different methods to reinstall Vista; See suits you the method...

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

  The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

  Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

  Acrobat Connect Pro data sheet

  I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

  It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.

• Crash in Windows Vista Home Premium

  My Dell with Windows Vista Home Premium OS desktop computer crashed.  How can I get a new Installation of Vista, or the recovery disc when I have an activation key valid for my OS.  I can only start in safe mode and can't access the Internet on this subject.

  Hello

  You can contact Dell and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  Here's how it works with a Dell:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  Some manufacturers have more available Vista recovery disks.

  If this happens and / or your recovery partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I bought a copy of Windows Vista Home Premium and after reinstalling my OS, I thought that the product key already exists, and it will not accept it.

  I have a laptop with windows vista Home premium that I bought at a price of extortionist from a retailer, I had to reinstall because of some software that magically stoped working and so my computer crashing. Now Microsoft´s site says that my product key already exists (although I know because this is my product key) and he won´t consider. How can I get my original key work?

  original title: valid Windows Vista product key

  You must use the Activate by phone and speak to an operator.

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

  I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

  So in plain English for the layperson to the computer, lol, can someone tell me...

  1. where should I back up to? (windows, norton?)

  2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

  3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

  Hello

  Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

  However, try these options:

  Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

  Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

  See:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also, you can see the following link for more information about Windows backup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• Can I make backup and system restore, my PC has Windows Vista Home Premium installed.

  I have Windows Vista Home premium installed, but it won't back up my files and I can't use the system & restore for some reason any.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  _______________________________________________________________________________

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Validation in Windows Vista Home Premium at the start: errors and complications.

  I was directed to this forum as a last chance for my situation.  I'll copy what I wrote before:

  First of all: I can't run Microsoft Genuine Advantage Diagnostic Tool.

  With that of the road, I'll try to explain my situation.  Earlier today, I ran in the hope to get rid of some unnecessary files in disk cleanup. Well, he eventually delete most everything out of my C: drive.  So I ran a restoration of the system to an earlier time.  After the restoration, I tried to connect but received a box saying that my Windows Vista Home Premium product key is not valid.  They gave me three options:

  Reduced functionality mode (does not work; see below)

  Enter the product key

  Contact HP - do you have this: they wanted $ 100.

  Now before to get started by offering suggestions, you need to get more information.

  I can't use the reduced functionality mode.  When I click on it, an error with file not found window appears.  The only way I can access my desktop is by going into safe mode, and I can't go in safe mode with network.  So based on this little bump in the road, I was not able to use the tips I found online, because none of those working in safe mode.

  Now there is more.  Frustrated, I tried to follow guides anyway.  So I followed the following steps:

  Step #3 game

  (1) open Internet browser

  (2) Type%windir%\system32into the browser address bar.

  (3) find the CMD.exe file

  (4) make a right click on CMD.exe and selectrun as administrator

  (5) type: net stop slsvc (it may ask you if you are sure, click Yes)

  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  (7) type: Rename tokens.dat tokens.bar

  (8) type: cd %windir%\system32

  (9) Typenet start slsvc

  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  (11) restart twice

  Not only that not solve my problem (since I was in safe mode I was refused permission), but it has created a new problem.  Now when I start my computer normally, IM is more given three options (reduced functionality mode, enter a product key, contact HP).

  Instead, when I log on, an error pops up saying: "Insert the Windows CD or installation DVD into your computer to begin the process of resettlement." Now, my computer was shipped with windows and everything installed by the factory with the sticker on the side of the tower.  I have no Dvd or Cd.

  I've had this computer for almost 3 years and I can not lose what I have on my computer. I have a genuine copy of Windows.  I have no idea what I'm supposed to do now.

  I used these links:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/3561f32a-d581-4DBD-b90e-fd680f970258/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/c9340e5d-7efb-4edd-B256-defa6b997062/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/ae720c35-3C91-4f07-85AD-82d99297cb11

  and many others that I can't find my way.

  I am posting this from my laptop not my computer with the problem.

  Here is the link to the original thread:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/6b962e8b-ff83-4b4d-a3bd-c7d9a8dc2471

  Is it possible that I can fix this?  Can I install Linux or something, just so that I can access my files?  Thank you.

  Hello
  
  Since you are concerned about the data on the drive, I suggest you first backup of data.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files
   
  I recommend you contact the manufacturer of the system to help about it.
  http://h30434.www3.HP.com/
  http://welcome.HP.com/country/us/en/support.html
  http://welcome.HP.com/country/us/en/contact_us.html

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• In windows Vista (Home Premium) Remote Desktop connection does not work correctly

  I installed and re-installed my Vista (Home premium) 2 times already because of the remote desktop connection.  I have a problem connecting from another laptop running windows 7 to connect to my desktop running Vista.  The remote control works on the other hand the meaning of desktop running vista, laptop running windows 7 Professional.
  Looking at the Vista under \System\Remote setting\Remote tab which shows the remote assistance box, but the Office box where you can choose what type of connection can be established remotely is missing.

  I went though all as responses to forum, but nothing helped.  Even in a "sfc/scannow" command prompt running did not help.  It is said that he finds corrupted files, but it cannot solve all corrupted files.  That's why I reinstalled windows hoping to fix this problem but WITHOUT SUCCESS.

  Can anyone help?  I've attached a screenshot of what I see in vista.

  You can connect FROM an original version of Windows to another computer, but you cannot connect to an original version of Windows.

  It is not an 'idea' it's hard cold fact that is at least 12 years old.

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.