Windows Image Helper (buffer overflow vulnerability)

Similar Questions

• CSCux42019 - Cisco ASA IKEv1 and IKEv2 buffer overrun vulnerability

  Hello

  WE have a CISCO ASA 5520 with firmware 8.4.7 - 15 and let me know if this device/firmware is affected by this new vulnerability ' ASA IKEv1/IKEv2 - Buffer Overflow Vulnerability '.

  Thank you very much

  Hi Jesus,

  Yes, it is affected.

  Please upgrade the recommended patches.

  Since it is set at 8.4.7.30 you can try upgrading to this image.

  Kind regards

  Aditya

• SE Buffer Overflow prevented notification and "Windows Explorer has stopped working"

  Dell Inspiron 1501 with Windows Vista Home Edition SP2 using base. Receive notification of the 'Buffer Overflow prevented' McAfee antivirus program caused by progran Wndows Explorer.exe. also get notification "Windows Explorer has stopped working", then after a while "Windows Explorer restarted". I don't know why this is happening. Help, please.

  Hello

  See the following article:

  Note: Before installing, be sure to cook the data.

  Error: Windows Explorer has stopped working:

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Not able to see the images in the Windows Vista Help file

  I use a Windows Vista operating system and I'm not able to view the images in the Windows Vista Help file... ! Here are the troubleshooting steps I tried to solve the problem:-

  1. I tried sfc/scannow and chkdski/f/r.
  2. Tried to clean boot.
  3. Tried to create a new user account.
  4. Tried in safe mode.
  5. Downloaded and installed the WinHlp32.exe file from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
  6. Tried running the http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx SubinACL tool
  7. I tried Startup Repair tool.

  Could you please temme then what to do? I look forward to hearing from you soon.

  Hello
  Try this for this issue:
  Equip your Windows recovery disk, then select "Reinstall partial '.»
  Check the "Winhelp" since the consolidation of program.
  Next
  Finishing
  Then restart.
  Which solves the problem?
  hope this helps,
  b Eddie

• Buffer overflow

  Hello... I hope someone can help me! I just turned on my computer and when I try to open Internet Explorer, I get a message from my McAfee SecurityCenter, saying "Buffer Overflow blocked" with a yellow exclamation point. He then said:
  McAfee has automatically blocked a buffer overflow.
  On this buffer overflow
  File: C:\Program may Explorer\iexplore.exe
  Buffer overflows can cacuse legitimate programs to fail. Other programs that are the buffer overflows, however, can be used to damage your computer, compromising safety and damage important files.
  He asked me then either:
  Confidence in the future to this activity
  Close this alert

  So I can't get Internet Explorer to work. I get the same alert. I did some reading and saw that the overflow is an attack, and I hope the McAfee caught, but how to stop this buffer overflow so that I can get my computer working again? I am writing from another computer, since I can't get the internet right now.

  Thank you
  ND21215

  Hi, ND,

  on the Helper.dll malicious DLL, see: http://www.greatis.com/appdata/d/h/helper.dll.htm.
  You are infected with the Infostealer.Banker.D Trojan.

  Try to use as SUPERAntispyware (freeware) and Ad-Aware (freeware).

  When everything has failed, HijackThis v2.0.2 (http://aumha.org/downloads/hijackthis.exe) is the tool to use (in conjunction with other utilities). HijackThis will NOT fix anything on its own, but it will help you to identify and remove any hijackware / spyware with the help of an expert.
  Download: http://aumha.org/downloads/hijackthis.exe  
  Post your log in:
  http://spywarehammer.com/simplemachinesforum/index.php?board=10.0,
  http://forums.spybot.info/forumdisplay.php?f=22,
  http://aumha.net/viewforum.php?f=30,
  or other competent body for review by an expert in the field.

  If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services. Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• Now PATCHED: Player QuickTime Streaming Debug Error Logging buffer overflow

  The following was copied/pasted from http://secunia.com/advisories/40729/

  Description
  Krystian Kloskowski has found out a [critical] vulnerability in QuickTime Player, which can be exploited by malicious people to compromise a user's system.

  The vulnerability is due to an error of border in QuickTimeStreaming.qtx during the construction of a string to write to a debug log file. This can be exploited to cause a stack-based buffer overflow for example tricking a user in the display of a malicious web page that references a file SMIL containing a URL that is too long.

  A successful exploitation allows execution of arbitrary code.

  The vulnerability is confirmed in version 7.6.6 (1671) for Windows. Other versions may also be affected.

  [NO] Solution
  A hotfix or an update is not currently available.

  EDIT: Due to this vulnerability in QuickTime, Secunia reports now all my browswers (IE, FF, Opera) as being insecure.

  QuickTime 7.6. 7 was released http://www.apple.com/quicktime/download/ ;

  and Secunia PSI removed this vulnerability to his list of (In) Secure Browsing.

• The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

  The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
  Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

  This has happened

  Each time Firefox opened

  few days back

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

  I have the same problem

  deleted expletives - Maurane

• Ignoring the buffer overflow

  Is there a way of 'ignore' the buffer overflow error and leave the buffer to be overwritten without having to close and the process of acquisition and retune the radio report?

  I know that the first question is: "are you * sure * you do not want to do? '... But yes, I'm sure!

  ---

  Brandon

  Hey Brandon,.

  I'm glad you asked on this subject!  We have just posted our latest driver OR USRP, version 1.3.  You can download it here:

  http://www.NI.com/download/NI-USRP-1.3/4711/en/

  One of the features of this driver is a new node property that allows you to cost overruns and overflows as warnings rather than errors.  "You can find the Configuration property' advanced search ' WARNING policy.  Then, you can wire the constant return warnings:

  

  Please note, after updating your driver, you must also update the FW and FPGA on your USRP image.

• Serial port receive buffer overflow error

  I am trying to send a file to a folder in my computer to another folder in the computer using conncections tcpip as part of me learning labview. But I get an error

  Possible reasons:

  LabVIEW: Serial Port receive buffer overflow.
  =========================
  LabVIEW: The network connection was refused by the server.

  I don't know how to fix this. So please help me. I have attached the VI here. Thanking you,

  You read just 1 character of the file.  With your read file, on behalf of the value-1 to read the entire file.

  In addition, for writing file, there is a Boolean input on top for 'Prepend/string Size array.  The value FALSE or you will get some additional data at the beginning of your file you want.

• The appication or DELL is not a valid windows image

  Whenever I try to open a an application like outlook or Dellcenter pops up a window with the notification as follows "the application or the Dell...". is not a valid windows image. Who can toresolve this problem closer. I did everythink

  Hello

  ·         Did you the latest changes on the computer?

  ·         You have security software installed on the computer?

  ·         The problem occurs with all programs on the computer?

  ·         What is the full error message that you receive?

  Method 1:

  Step 1:

  Check if you have the similar problem with safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if that helps:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this helps

• How can I change the background to the photos in the windows image viewer.

  original title: How can I change the background to the photos in the windows image viewer.  I hate it in context and would like to have a black background that surrounds photos.

  I had before an Adobe photoedit who saw the pictures surrounded by a black background.  I accidentally deleted the adobe photoedit.  So now, I find my pictures with Windows Picture and Fax Viewer.  However, I hate the white background that surrounds photos.  How can I change the context surrounding the photos of BLACK color?

  Hello

  I suggest that you try to do system restore or reinstall Photoedit and check to see if it helps:

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Note: to perform the system restore, you must be running Windows as an administrator.

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• Why do I get "mscms.dll is not a valid windows image" on everything I try?

  I'm working on the kinks of swap hard drive in my Dell E310. The original tested 'ready to die' so I installed a new. I bought the backup for XP Pro disk, when I bought the computer. I loaded the operating system on the new drive and did the updates (80 or almost). I regularly get the message "the file or dll C:\WINDOWS\system32\mscms.dll is not a valid windows image."  What now?

  I've damaged my file mscms.dll on purpose and could not get any message about it even though I know that it is corrupt - maybe I wasn't quite hard.   I know that some other mscms.dll errors, but they are different.

  Tell me what you're doing to regularly get the message because I'd like to see it.

  After reinstalling and apply the updates of 80 or more, one of them was Service Pack 3?

  If you are not sure which SP you re running, click Start, run, and in the type box:

  Msinfo32

  Click OK to see your system information and Service Pack and what does say?

  If the rest of your system works well, you can use Explorer to navigate to the c:\windows\system32 folder and rename your file to mscms.dll suspicious to a name, remember (like: mscms.bad).

  So if your Windows File Protection is not working properly, it will notice the missing file and quickly and quietly, to replace the missing file with a backup copy.

  Wait a few seconds... then press F5 in your Explorer window to refresh the view and see that the file has been replaced and you have the mscms.bad and a new copy of mscms.dll.

  You should see a message like this in your newspaper observer event system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\mscms.dll. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5627.

  Restart and see how things look now.

  I can also send you a version SP2 or SP3 file mscms.dll via my SkyDrive and you can rename your suspicious file and replace to see if that helps your condition.  You might have some settings do not match here.

• The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk

  I am havin problems with my computer, when I start my computer or open a page or try to download anything it comes so far... The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk... I have a lot of problems in trying to solve how to fix this, as I don't know that much about computers. and I don't have the installation disc, I use windows xp I would be great if someone could help me please thank you. Kayleigh lindsay

  It also suggests that you can not run a software antivirus... If this is something you need to heal very quickly.  However, installing an antivirus application - if your PC is already infected - is usually ineffective.

  I suggest you do the following-
  (1) download and run a full scan using the Scanner for Ms.  Available here: http://www.microsoft.com/security/scanner/en-us/default.aspx
  It does not install, is therefore more difficult for malware to block.
  (2) if that was clean, then get an anti-virus in real-time as soon as POSSIBLE.  There are many good choices (Norton, McAfee, etc.) which costs money, and several good without applications, including MS Security Essentials available here: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Note!  If you have another antivirus installed, do not add MSE.  Run two at once is precarious - they will conflict with each other.
  Also, make sure that your windows firewall is turned on, or you have another 3rd party firewall installed.

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!