Windows Installer? "" Windows box install dialup automatically keep droping in my screen saying "waiting to install" without me rquesting to install anything.

Similar Questions

• Windows 7 install stuck to the language selection screen

  So I recently set up my own PC and tried to install Windows 7 Home edition. Everything would start to screen selection of language very well, but if I select anything with the mouse or keyboard that was going to happen. I checked all USB ports and they all work when I go to the BIOs menu, but they are still hooked on what an OS install screen. Currently, I have a 2 TB hybrid drive and a 120 GB SSD inside as well as an optical drive to read my installation disc. Any suggestions?

  Thank you man. In fact, the issue has proved being in a simpler way that I thought. I just had to enable the PS/2 controller.  I appreciate your help.

• Windows Installer, preparing to install error message keeps popping up

  Windows install... Preparation for the installation of pop-up

  I get this pop-up.

  I am using windows 7 Home premium

  Hello, SIM,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Did you recently brought no changes to software on your computer?

  Thank you for details on the issue.

  This problem may occur if the Windows service install does not work, or due to corrupted Windows files.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Check if installation of Windows service is enabled. Please follow these steps:

  a. Click Start, type services.msc in the start search box and press ENTER.
  b. in services, right-click Windows install, click on Properties.
  c. make sure that the service Windows install is running and set as automatic.
  d. If not, select the Startup type to Automatic and click on 'Start'.
  e. click apply and ok.

  If this does not help, use method 2.

  Method 2:
  Run checker (SFC) of file system and see if it helps.
  Refer to this article:
  Use the System File Checker tool to repair missing or corrupted system files
  https://Support2.Microsoft.com/kb/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows Installer message box keeps popping up

  Get the windows installer message box stating that 'the component you are trying to use is on an unavailable network resource' when I click OK or cancel, another different with the installation package message box appears.  When I try to find the source of the user on the hard drive, I can not find the path.  Cannot install Windows Installer CleanUp because of these boxes.  He thinks that there are other facilities running and asks me to install these first.  Have SP2, run virus check, etc.  Help?

  Hello

  When you say that you can not install Windows Installer CleanUp, I just need to clarify. You mean the latest version - Msicuu2.exe? The link here...

  http://support.Microsoft.com/kb/290301

  If so, wow... interesting problem. You can even run the program because you have to many contradictory installers that he used to open them. I or someone of another HERE will tackle this problem if that's the case, but first - let us know if the latest tool Windows install cleanup has the same problem?

  Too... before I give it a shot... Make sure you have all the disabled virus scanners because they can also interfere with Setup and cause problems.

  Hope this helps,

  Steve <> Microsoft Partner

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Updates the window is locked. I am the administrator and I can't unlock it. The box to verify automatic is faded as if he is not available.

  Recommended to me by Windows Update will be automatic check box not check it so that the updates will download automatically. This time, for some reason, he is never to download updates.

  Just today finished a full clean install of Vista Home Premium to Vista Ultimate. Everything is smooth, with the exception of this one function. The installation has not changed files or programs or data of any kind. He even fixed a few issues that MS Techs and I had worked for more than 8 months.

  Hello

  I recommend you follow the steps in this article and check if it helps.

  http://support.Microsoft.com/kb/822798

• I bought a new laptop with Windows 7 installed. Whenever I restart it, it has installed updates which can take up to an hour or freezes. You can ignore the automatic updates of Windows 7?

  I bought a new laptop with Windows 7 installed.  Whenever I restart it, it has installed updates which can take up to an hour or freezes.  You can ignore the automatic updates of Windows 7?

  You can turn off the automatic updates, Yes, but doing so would leave your computer at risk. Simply put with him: after another reboot or two, you will be fully patched AND fix!

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Installer 4.5 installed it on Windows Vista

  Original title: defective Installer

  Ultimate home, update 2, 64-bit Vista. Have a defective installation program and install download of 4.5. Said there is not enough storage, but there are 129 available concerts.

  Hi rdr2345,

  1. are you referring to Windows Installer?

  2. Why do you want to install Windows install 4.5?

  3. What is the complete error message you receive?

  4. where did you downloaded version of Windows install 4.5?

  You do not have to install Windows install 4.5 version if you have Windows vista service pack 2 installed on the computer.

  If you still want to install it, then I suggest that you restart the Windows Installer on the computer and check if it works.

  (a) click Start, click run, type services.msc in the Open text box, and then click OK.

  (b) in the list of Services (Local) , right-click on Windows Installerand then click restart.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Installer error - "Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

  Original title: Windows Installer could not access
  I am running Vista Home Premium x 64.  Recently when I try to install/upgrade programs up-to-date currently any Apple IE iTunes Quicktime and Safari I get this message.

  Windows Installer service could not be accessed.  This can occur if Windows Installer is not installed properly.

  The window update fails on the stage of the installation.  I have read several threads and tried several fixes, but without success.
  I have disabled/restarted/activated/restarted and switched to manual, auto and back with no success. When I try to force an early Setup, I get the following message:
  The Windows Installer service on Local computer started and then stopped.  Some services stop automatically that they are not in use by other services or programs. 
  I deleted the temp under apps folder.  I copied the reg. Since a sound Vista machine and imported into my machine setup.  I tried again with a reg. offered in one of the sons, all with no change.
  I tried to install version 4.5, but was unsuccessful (it looks like I got lucky there).
  May be related or yet another problem, whenever I have Windows Live Mail, a ope 'preparation for the installation of window lights up for about 15 seconds before disappearing and then my mail opens.
  I don't have a Vista CD.  My HP provides on a partitioned drive recovery files.  There seems to be no usable on my computer restore points.
  Ideas?  Help?
   

  Hello

  What happened when you tried to install Windows install version 4.5? You get an error?

  Follow these methods and check if it solves the problem:

  Method 1:
  Auditor of files (SFC) system scan on your computer. SFCscanwill make Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 2:
  After analysis of SFC running, try again to install Windows Installer 4.5 Redistributable.

  Refer to this article:
  http://support.Microsoft.com/kb/942288/en-AU

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error-"Windows Installer Service could not be accessed. This can occur if the windows installer is not installed properly.

  Original title: Windows 7 critical updates

  A number of critical updates made automatically in the last two days.  He was stuck in a loop "failed to install...". "for hours.  I tried to make it a point to restore in safe mode, and it is stuck in a loop (more than 12 hours).  I tried to uninstall and it won't let me.  Now I get "Windows Installer Service could not be accessed.  This can occur if the windows installer is not installed properly. "If I turned off the computer and do not ne pas demarrer start in safe mode, shut up always on the original"failed to install ".  I need help!

  Windows restore points have never been of any property,

  Images of a completely separate hard drive system would be easy to undo this question

  It's so time spent to create system images before downloading and installing windows updates

  http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html

  http://www.Macrium.com/reflectfree.aspx

  https://www.YouTube.com/watch?v=KQA7NlLvxg8

  If you need to reinstall windows

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Cannot install Windows 7 "Windows didn't prepare the computer to start the next phase of the installation." to install Windows, restart the application.

  Original title: Installation of Windows 7.

  I tried to install Windows 7 (clean install from XP and reveived the following message is displayed:)

  Windows didn't prepare the computer to start the next phase of the installation.  to install Windows, restart the application.

  I restarted my PC, anti anti-virus disabled (as advised) and still get the error message.

  According to the Upgrade Advisor Windows 7 my PC is compatible.

  Any ideas?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• "Windows is unable to complete the installation. To install windows on this computer, restart the installation.

  INSTALLATION OF WINDOWS FOR THE FIRST TIME

  Hi, I am using the windows 7 Home premium with Sony Vaio netbook.  This message appears when I've been windows installation since it is newly purchased, "Windows could not complete the installation. To install windows on this computer, run the Setup again"when I click ok, and then the computer restarts automatically and then come back to this message. I reboot several times but the result was always the same. Home premium to Windows 7 has been with the netbook already, so I don't have the Disc... can someone help me solve this problem? Thank you very much

  My colleague has had a similar problem when she came back to the States with a new Vaio from Sony, I didn't just run recovery and reinstall Windows and its worked good since. She even gave me a hug for fixing.

  The problem seems to be the OOBE which would suggest its more hardware than windows, but I understand your nature, you want to be right about everything.

• Windows 8, windows install keeps flashing on the screen several times only WILL NOT STOP

  Hello

  I'm having a weird bug, that I have not met before with windows install.

  I tried to install a version of MS Access 2000 Runtime on my machine to windows 8 dell inspiron 660. (The company I work again to use access 2000 Apps)

  The installation failed and basically the planted program without completing the installation.

  Immediately after what happened the windows Setup window started blinking on the screen very fast.

  I tried a system restore, the program Microsoft 'fix - it' (do not do anything), and I have restored the registry from a backup without success.

  The ONLY medium to stop flashing windows setup is to stop the windows service install, but when you start to use the pc new installer windows itself will start up and the flashing continued.

  I can't find a way to disable windows full installer (apparently windows 8 will not let you change the start type services.msc )

  Dell technical support was also no help because they wanted me to pay the money even if its in warranty.

  I'm thinking really just install xp on it and be done with this...

  HERE IS A VIDEO OF THE PROBLEM

  https://www.YouTube.com/watch?v=LHS1ELw3Olo&feature=youtu.be

  Help, please!

  Hello

  Please keep us updated.

  I understand that the Windows 8 bootable USB device is not detected during the execution of refreshment in the computer.

  You can check the BIOS for the boot priority setting if the USB device is enabled or not. Check the steps in the manufacturers Web site to change the priority of the computer starts.

  If this doesn't help, you can try to re-installation through the disk or media that you have, otherwise follow the link below.

  When you buy Windows 8 an email with the download link and purchase details will be sent to your email address that you use to purchase / register your product, you can simply access email and use the download in links for the re - download to your computer.

  Also check out the links below:

  http://Windows.Microsoft.com/en-GB/Windows-8/buy-Windows-8-online-FAQ

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• When you try to install anything I get an error: 'could access the Windows Installer service '.

  Original title:

  Windows Installer.

  When I try to install anything I get the following message: "service Windows Installer could not be accessed.   Windows can run in safe mode or Windows install not installed correctly.  I'm not running in safe mode.  This problem started in the last day or two and there have not been any changes to my computer.  I'm under Winsows XP Professional, 32-bit, service pack 3.  Could you help me solve this problem?  Thank you.

  Hello
   
  You can try the steps from the following link and check if it works:
  ""The Windows Installer Service could not be accessed "error message when you install a program in Windows XP "
  http://support.Microsoft.com/kb/315353
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
   
  Let us know if it helps!

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.