Windows Server 2003 DCS file - on wifi directory to the root automatically changes

Similar Questions

• Microsoft cannot activate my Windows Server 2003 Standard Edition 32 bits, tried all the possibilities but always in vain.

  I called the customer service. I called the support to businesses. whatever i can I I did but I don't get any solution, right away that these people say that support is not provided for windows 2003 as its being obsolete.

  My question is whether the product activation. I bought the license for windows 2003 std ed. At least I need solution for activation, it should be default but nobody is bothered.

  Please I ask you people to get a confirmation code to activate my windows server 2003 standard edition.

  I enclose some of the screenshots for your information.

  

  Hello

  We do not work for Microsoft; We are mainly volunteers here.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Installing drivers in Windows Server 2003 with USBKeyPrepF6 to a PE2850 REBUILD the difficulty

  I need to rebuild a PE with Windows Server 2003 STD 2850, and I can't get the server to read a USB flash drive as a floppy disk. I am using the USBKeyPrepF6 program, but something being guard corrupted the USB key. The only time wherever it seemed that the program worked the server could not read the flash drive. I activated the Floppy USB option in the bios of the server. I have used this program once before with another driver and another server, a PE of 1950, but I can't make it work this time.

  I use a Windows 7 computer. The flash player is corrupted at some point, because Windows cannot read more and I am prompted to format the drive. The only way I can get the formatted drive is using DIKSPART in a command window.

  This PE2850 has a floppy drive, but I can't read a disk either.

  Any suggestions? Try to reuse the old material here...

  Do not use the USBKeyPrep utility, or the floppy disk. Use nLiteOS.com to integrate the drivers into your installation media instead. Or use a modern operating system.

• Windows Server 2003 R2 file sharing

  Hello

  My current problem on my server of storage here is that the we have a DB folder on the D drive that gets automatically not shared. We have uninstalled all 3rd party on the server. Our primary does the work to push and get to the storage server D drive in one of the folders called "DB file".  I tried to check, but I am not able to find the cause of why this is happening.
  Kind regards
  Sunny

  Windows Server is supported in the Microsoft forums:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  I suggest that you post your question there.   :)

• Upgrading to Windows Server 2003 Standard Edition

  I buy a Satellite M30x and for work, install Windows Server 2003. But the two devices was not recognized (PORT COM, SERIAL PORT?), no driver has been found. Someone has an opinion to solve this problem. In Device Manager, there are 2 system device Base System (?).
  Thank you

  Hello

  I think Toshiba does not support drivers for Windows Server 2003 for all laptops!

  So the only thing you could do is to try the drivers XP (utility chipset) or search the net en some drivers available!

  Goodbye, Sam

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• GPIB-USB-HS Windows Server 2003 driver available?

  I tried to install the GPIB-USB-HS device on our system of Windows Server 2003 R2 Standard 32 - Bit (German) with the last driver NI488.2 3.0 package.

  But the driver seems to be evil. After restarting Windows comes up with an error and event poster of the errors of several Viewer too:

  -The "nipxirmk" service failed to start due to the following error: the specified driver is invalid

  I think that the latest package isn't compatible Win Server 2003 but that it is announced at ni.com.

  Is it possible to install GPIB-USB-HS on a Win 2003 Server machine?

  Thanks for your help

  Kalize

  Windows Server 2003 32-bit R2 enables PAE by default ("physical address Extension") mode for addressing memory above the 4 GB limit.  National Instruments supports this operating system, it does not address memory above the 4 GB limit by using EAP setting and many pilots OR will fail to load if this setting is enabled.  (Note that your computer may intuitively put some of your memory above the 4 GB limit, even if you only have 4 GB of RAM).

  On Windows Server 2003, you can disable the EAP or prevent Windows to use addresses beyond 4 GB, which allows loading the drivers EITHER.  Please see KB 54D9I6M6: OR software failure when PAE (physical address Extension) is activated on Windows operat... for more information.

• Color LaserJet Ent M553dn: HP Laserjet Enterprise M553dn PCL6 x 64 drivers for Windows Server 2003

  Just bought a HP Laserjet Enterprise M553dn and was able to install the drivers for Windows Server 2003 x 86 driver disc supplied with the printer, but I cannot locate the drivers for Windows Server 2003 x 64.

  I checked the site hp.com, but what they have there is PCL5 x 64 drivers, which gives me a 'printer driver is not installed. Message operation could not be completed.

  Just for fun, I tried to download the drivers for PCL6 Windows 7 x 64, and trying to set up the printer with these, but it gives me a message "Windows is unable to locate a suitable printer driver.

  Where can I find the Windows Server 2003 PCL6 drivers x 64?

  Thank you!

  As any pcl6 driver will work, why not just load any pcl6 64-bit driver that is built into the operating system.  Simply choose hp on the left and choose any color laserjet 64-bit driver on the right.  If none is available, download the driver 64 bit hp universal pcl6.  When loading the driver do not have system autodect the printer but load the driver manually.

• Wireless LAN Card for Windows Server 2003?

  Hello

  I need a fast Gigabit Wireless LAN Card for Windows Server 2003 32-bit Edition can say list the name manufacturer & model of LAN cards.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Driver for missing MS Publisher Imagesetter on Windows Server 2003

  I've got 8 servers running Windows Server 2003, 4 of them can not install the MS Publisher Imagesetter in the Add Wizard of printing imagesetter, the only options available are:

  PS 35PPM

  35PPM PCL

  PCL6 35PPM

  Also it a generic 'printers' group, but it only contains Laser printer drivers.

  The servers that run Windows 2003 using Office 2003 or Office 2010, but all have the same problem.

  Why is the MS Publisher Imagesetter imagesetter installation option is not available?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Resize the Windows Server 2003 boot partition

  My client has Server 2003 with a RAID. The system volume / start is 12 GB. Right next to this boot on the partition volume is 30 GB of unallocated space. The rest of the disk is allocated to a separate partition in which all their data lives.

  Can I expand the boot volume to include the 30 GB of unallocated space? If so, how?

  Your help is appreciated.

  Al

  Hello, Al Marion.

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• After changing the administrator password in windows server 2003, I can not connect the next day why?

  After changing the password in windows server 2003, when the new password take effect?

  Hello

  In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• Repair of Windows server 2003

  Hello

  I have my server booted from a CD that has been created as bootable (it contains the necessary drivers for the RAID configuration).
  Now, I put my Windows Server 2003 CD in the drive.  I need to run the repair utility because my system does not start on its own.  Trying to get into safe mode, it hangs.

  Can what commands I enter from the CD to start the repair?

  Also, if I run the setup of windows - it erase all my info and settings?  It will install properly if I have two hard disks with a RAID configuration configuration?

  Thank you.
  TT

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server 2003 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared...

  I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared for all users when you access from anywhere.  I deactivated and reactivated the snapshots and it won't come back please advise...

  Hello ErekBye,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• In windows Server 2003 R2, standard edition, its CPU usage showing the use of 100%

  I have windows Server 2003 R2, standard edition, in recent weeks its CPU usage showing the use of 100%. While treated cheking, a process called 'System', showing the CPU from 97 to 98%, we have stopped other services one by one like Trendmicro and backup but none advantage, can you please help us?

  Hello

  Since you have a problem with Windows Server 2003, you can ask your question in the TechNet for Windows 2003 Server GENERAL forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads