Windows server 2008 R2 Standard hangs so that closing

Similar Questions

• Windows Server 2008 R2 Standard

  I tried to do a startup on a PowerEdge T310 Windows Server 2008 R2 Standard Server repair.  When I run through the repair process, that is the message I get into the details of why it is not repairable.

  Name of the event: StartupRepairOffline

  Problem signature 1 & 2: 6.1.7600.16385

  Signature of the problem 3: unknown

  Signature of the 4:21200771 problem

  Signature problem 5: ExternalMedia

  Signature of the problem 06:16

  Signature of the problem 7: BadPatch

  OS Version: 6.1.7600.2.0.0.254.1

  Is this a bad update telling me or fix to repair fail?  It happened this past weekend, and nothing must be installed.  Any suggestions on using the Recovery Console to repair this?

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Downgrade from Windows Server 2008 R2 Standard for Windows Server 2008 Standard

  How can I make the downgrade of the Windows Server 2008 R2 Standard to Windows Server 2008 Standard?

  I know that the Server 2008 R2 is only x 64, but I need Server 2008 x 86, it's because I need the downgrade.

  Does anyone know the correct procedure to do this, or some e-mail to contact someone from Microsoft that could help me?

  Thanks for help

  Best regards

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to install IE6 on one and IE7 on another Windows Server 2008 R2 standard.

  There are two servers. I need to install IE6 on one and IE7 on another Windows Server 2008 R2 standard. There is no option to delete the current version and downgrade. I tried the steps listed on http://www.enhanceie.com/ua.aspx and it made not usable IE.

  Hello

  Given that the problem is related to Windows Server 2008, I suggest you post this question in the Windows Server Forums.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Error of activation 0xC004C003 for Windows Server 2008 R2 Standard key: "the activation server determined the specified product key is in use".

  I installed Windows Server 2008 R2 Standard as a test version of an iso download got on the product site in Ms. In the meantime, I bought the software. Once the software has been delivered, I tried to activate with the key provided me with the software sent from Microsoft. I get... "the activation server determined that the specified product key is used" and throws the error asOxC004C003code. What gives here? They just sent me the key? I need to get this fixed as soon as POSSIBLE.

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  They will help you in the above Forums Windows Server 2008.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's what that means for Vista:

  http://support.Microsoft.com/kb/951287/en-us

  0xC004C003 error code

  The activation server determined that the specific product key is in use.

  This error code indicates that the product key you entered has already been activated, and you have to get a different product key.

  See you soon.

  Mick Murphy - Microsoft partner

• I bought windows server 2008 R2 standard and Enterprise edition to install incorrectly, how do I activate windows?

  I bought windows server 2008 R2 standard and Enterprise edition to install incorrectly, how do I activate windows?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Thank you
  Tony

  Original title: windows server 2008 key

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.

• Download Windows Server 2008 R2 Standard x 64

  Where could I download Windows Server 2008 R2 Standard x 64 with leading ISO extension of Microsoft?

  Thank you!

  Where could I download Windows Server 2008 R2 Standard x 64 with leading ISO extension of Microsoft?

  Thank you!

  If you subscribe to MSDN or TechNet.

• With Windows Server 2008 R2 Standard activation problem

  Dear team,

  We try to activate windows Server 2008 R2 Standard, but it shows the error below, we already try to loging Admin Domain_Admin account & local.

  Error: 0 x 80070005 access denied: the requested action requires elevated privileges.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows 7 64 bit Pro connects to SQL Server on the Windows Server 2008 R2 Standard domain

  I put upgraded to Windows 7 Professional computers to Windows XP Professional, but I have a problem with getting one of software programs management of stock that allows us to connect to our SQL Server 2008 R2 Standard Windows on new Windows 7 computers.

  Our computers are connected to a domain, and therefore SQL Server. Computers Windows XP allows each user to standard domain to connect and to connect to SQL Server via the stock management software.

  But on the standard domain of Windows 7 Pro computer users unable to connect to SQL Server, but administrator accounts of area on the same Windows 7 Pro computers can connect to SQL Server through the inventory control program.

  I have set up the alias of the server, the server name and port number via the SQL Server Client Network utility ( cliconfg.exe ) so I know this isn't the problem because it works when I'm logged on as a domain administrator.

  There seems to be something to do with permissions of user domain and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that does not allow standard domain users to connect to a SQL Server. But I can't find anything about and cannot practice how to solve this problem, except to make all users, domain administrators that is obviously not a good thing to do. So basically I think I need to create a group policy that allows users to connect to SQL Server, but I have no experience in doing this and don't know where to start.

  Thank you for all that you guys help and I hope someone can give me the solution to this problem.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• SRM 5 Server installs on Windows Server 2008 R2 Standard

  The compatibility matrix States that as compatible with SRM 5 company? Is this correct? If so, why should Enterprise?

  See you soon,.

  David

  Hello

  The matrix compatibility tells Windows Server 2008 64-bit (#2) so you should be fine with Standard or Enterprise.

  You can post a link to where you see SRM requiring a business - I could consider getting this corrected.

  Thank you

• Unable to connect to the server under any account except in safe mode - Windows Server 2008 R2 Standard.

  My Windows Server 2008 R2 does not all connect directly to the server - level of the console or via the desktop remotely.  The symptom is that Active Directory is not running.  I tried to connect computers MacBook with OS X (10.5) to active directory.  I can log on to your desktop and see all the network shares, so all users seem to work OK - performance is slower than usual.  Logging indicates the user ID or password is not valid, but they are working on the jobs or when we book in safe mode.  DCDiag does not work because it cannot log in with credentials.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Try to reinstall Windows Server 2008, but get a message that I need to install the driver for the raid card.

  LaCie 5big Network 2 10 TB Network Attached Storage

  I'm going to re install OS windows storage server 2008 standard but system require raid driver card,

  What is driver on raid card.

  Hello ChatJen,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
   
  Thank you

• Impossible to install windows server 2008 r2 standard x 64 for PowerEdge T110 ii

  need help on how can I install the Server 2008 r2 to newly purchased edge T110 ii.

  I tried several times using the operating system deployment wizard, downloaded the drivers via FTP. and to continue the process step by step.

  After the restart, Server 2008 R2 DVD will start running. .  After clicking on 'install' button, the system is always ask / look for drivers.

  I downloaded all the drivers from dell Web site, he engraved on DVD, but I was always invited with traverse it for drivers.  Any idea?

  Server is currently set to Raid 1 with 2 SATA 500 GB each. Using the PERC S100 controller.

  Is the message that he needs a CD/DVD driver?

  If so, there is a small chance, there are actually the driver SATA, but 99% of the time, this message indicates that the corrupted Windows media.

  A few things to try:

  • Re-download the ISO
  • Check the hack to ensure integrity to download and/or use a download manager
  • Burn the ISO again
  • Burn the ISO using different software, reader and/or a different speed

  You can also install via USB - if you still get the message from driver CD/DVD, then these are the media corrupt; If it was due to a real CD/DVD driver problem, then it should not be a problem:

  http://jesscoburn.com/archives/2007/10/15/Installing-Windows-2008-via-USB-thumbdrive/