Windows to the Apple system

Similar Questions

• Configuration window for the XP system

  Hello

  Is it possible to resize the XP System Configuration Utility window to make it possible to see the whole of the entry for 'Command' and 'place '.  What I see now is the «...» "at each end of the entry.  Thank you.

  Hello

  Is it possible to resize the XP System Configuration Utility window to make it possible to see the whole of the entry for 'Command' and 'place '.  What I see now is the «...» "at each end of the entry.  Thank you.

  No, you can not resize the msconfig window, you can resize each column by positioning the mouse on the lines in the column heading until you get an arrow with two points and then clicking and dragging.

  You can also use the system information utility (start > run > msinfo32 > OK).  Click on the + next to the 'software environment' to expand the category then click on "startup programs".  The window can be resized, or you can 'select all' and 'Print' the list of startup items or creates a file of the startup items (seehttp://www.winxptutor.com/msinfo32.htm .  (Sometimes, msinfo32 shows too many files.  (Seehttp://windowsxp.mvps.org/msinfofix.htm ).

  Or get Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx (the tab "Connection" of Autoruns is equivalent to the "Startup" in msconfig tab)

• Laptop will not reinstall windows after the factory system recovery

  So I have a laptop HP which is relatively new. I recently acquired the Virus 2010 Vista AntiVirus Pro. When the malware and spyware could not fix the problem, I decided to do a system restore, which would put the computer to the way it was when I bought it. I backed up the files and do the system recovery. He filled the recovery then said it will re-start to reinstall windows and complete the process.

  After the restart as it gets and error that says: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "ok" to restart the computer, and then restart the installation. »

  The only option is to click on 'ok', but after clicking it he is trying to reboot once again and the same error comes back. We tried to manually close the laptop and restart, but we always get the same error. I can get the start menu when the information system and the recovery is but to the past is just the mistake. Any suggestions on how to fix it? I don't know what else to do.

  http://welcome.HP.com/country/us/en/contact_us.html

  Problem with the HP recovery process, contact HP at the link above.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• In Windows 7, the registry system shows C? ------entries rather than C:\

  I noticed that some of the entries in the Win 7 Pro 64-bit registry system) have values of path beginning with C? ------(: replaced by?).  I know that the jokers are used as variables, but I wasn't aware of this type of use of '?

  .. just curious to know what means this entry type.

  Thank you

  greygeek

  The quick fix for this is to export the following key using RegEdit:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer
  Save it as:
  HKEY_LOCAL_MACHINE-Software-Microsoft-Windows-CurrentVersion-Installer.reg
  Then load the RegFile in Notepad and do a replace operation:
  Search: C? \
  Replace by: C:\
  unless you Win 8:
  Search: C:\?

  Replace by: C:\
  Then save the RegFile as:
  FIXED.reg HKEY_LOCAL_MACHINE-Software-Microsoft-Windows-CurrentVersion-Installer
  and click (or double-click) top to enter fixed data in the registry.
  I myself found 2003 bad entries but fixed the lot in seconds!

• Boot Camp and select the operating system

  I installed Windows 7 and can not see where boot camp is installed.

  Windows is the default system, but I want to return to the ability to choose what system I use at startup.  Which key I want when starting to give me the disks/partitions to start for both systems.

  Thank you

  Use the Alt/Option key or install drivers of BC that have a set of applications. Please visit https://help.apple.com/bootcamp/controlpanel/5.1/ .

• What is the secret for the Apple passwords?

  I'm really getting upset with Apple confused password security protocols.  It lasts for years and I need to know the terminology and protocols for different Apple applications.  After be locked and need to reset, I learn only that there are different protocols for:

  • iCloud
  • Apple TV
  • This forum
  • iTunes
  • Forum iPad
  • Maybe others

  Apparently, there are different terms:

  • Apple ID
  • Username
  • Password
  • iCloud security code
  • Maybe others

  I wrote various combinations of my email, username, PW, cryptogram, Apple ID and perhaps other safety information.  They are not the same for different Apple products.  If I do the incorrect entries for a small number of tests, I get locked and am forced to reset the terms.  Then, I use the new conditions for a different product or a utility and get locked again.

  Can someone direct me to a site that lists the 1. Apple product/utility (AppleTV, iTunes, forums, etc.) and 2. the term used for safety (PW/user/email/ID Apple/etc name) and which combination of these elements is acceptable?

  Also, continuing my rants, it would be good if the Connect dialog box would be easier to use and warn the user of the number of trials authorized and an indication of the correct answer as "usually your email" or "case sensitive" or "L * 02".»  I can't believe that robots or hackers are so sophisticated that it can crack most of the indicators that provide other sites.

  There are a few things that have changed a few years ago:

  • Frequently asked questions on the audit in two steps for Apple ID - Apple Support

  • The audit in two stages and SMS - Apple Support

  • Authentication two factor for Apple ID - Apple Support

  You can choose to limit the number of AppleIDs to an AppleID; If you have two.

  They can be combined; I have only one. Don't see a need right now to learn more.

  Unless your situation has changed by intention or by accident.

  Apple ID FAQ - U.S. Apple:

  https://appleid.Apple.com/#! & page = faq

  Restore your AppleID - Apple:

  https://iforgot.Apple.com/password/verify/appleid#! & section = password

  It's a problem for a few years; There are new solutions to some, now:

  http://www.Engadget.com/2011/06/17/multiple-Apple-IDs-frustrated-by-apples-no-co consolidation policy.

  Even if someone is old AppleID is based on an address email of non-working, which can

  be changed; Apple support has articles and if you happen to have a new product

  their best help is free, if you can ask a question that relates to the newest one.

  Sometimes an older password will have been too easy for someone to guess or something.

  An automated system that can run through dozens of probable combinations a second, one

  kind of like a phone dialer automated, but more sophisticated, can possibly guess a lot.

  If it's a good idea to change your passwords to connect & use juxtapositions of letter/number.

  A little over a year ago, when I bought a new Apple product and asked

  use only he, my password was deemed not safe; changing it & then found

  my name associated with features I had no intent to use, (he signed me up to iCloud, etc.)

  I had to change the password again to a more complex than the previous. And for some

  reason, the Apple system he treated as a completely new AppleID. If the account is not affected.

  There is a little financial investment by some detective for private information and

  of them are not supposed to do this according to the rules of law. Others have paralegal rights

  to think that they can do, and then there are these adware scams where people give up everything

  their passwords and access computer or peripheral rather than learn how to remove the pop up windows.

  Because there are several angles, simple things involve practices secure to avoid user

  the bad guys to get an advantage. And avoid giving too many different pieces of the

  puzzle online because they can be easily locked to new car computers to do.

  (Avoid calling a phone number in a pop-up message to scam on the computer, for example;

  the scam of cale-hostage initially is easily ignored by force – enough of the browser; then launch

  the browser with extensions disabled; "or with physically cut internet access).

  Anyway, I'm not sure that I answered no questions, but the links above explain the most recent

  security aspects in the relationship between devices and Macs; and the sharing of information between

  them is also an area where caution is required. Avoid sell or give a device

  or a computer unless you have actually done ready for resale; by Apple support articles.

  I hope that you will get answers to the questions you are asking here.

  Good luck in this case!

• The sound system preference and Callnote

  I installed Callnote to record Skype sessions, but I found that it was interfering with the audio system so I uninstalled using AppCleaner. However, I have always had a rest of Callnote in the input and output peripheral windows from the Sound System Preferences: How can I get rid of him?

  Also (in the spirit of BOGOF - buy one get one free), it's annoying that my startup to open Safari, it starts but does not show a window - I always click on the Safari icon in the Dock. This started to happen with Yosemite, I think; until a window appears automatically. I presume that it does not show because "Hide Safari" is an inalterable permanent choice in the Safari drop-down menu, but why is this so when no other application has this selected permanently?

  Don't know about the first part, but for Safari, try going to system preferences/general and uncheck the narrow windows when you exit an application.

• Re: How to install Windows on the new Satellite Pro C50 8.1?

  I just bought a TOSHIBA SATELLITE PRO C50, that came with Windows 7 pre-installed.

  When you start the system for the first time, I simply close and put Windows 8.1 media into the optical drive (disc 1 of 4) then entered the Recovery Wizard and may have chosen the wrong option, because I completely erase the hard drive and partitions.

  Now that I did it, I can't find how to install the Windows Media Pro 4 DVD provided 8.1. I can't find the correct option to do this. I changed the startup option in the control panel by pressing F2 at startup, so it reads from the DVD player. The DVD starts but then takes me into a recovery area of the system, which is not good as I wiped the system completely.

  How can I just now to install the Pro 8.1 provided Windows on the clean system right now?

  Thanks for any advice.

  First, I would like to know what model of laptop you have exactly. If possible, please report the entire model number (C50-xxxxx). I just want to check the specification for this model of laptop.

  Did you buy this laptop as any new product and model in box?

  Anyway, if you have installation discs original recovery for this, you should be able to install it without problems. Start your laptop and press F12 to get into the boot menu. This menu wil shown on the screen, insert disc 1 into the optical disk drive, choose the CD/DVD drive from the menu, and then press ENTER.

  ODD must start reading Wizard disk / recovery will be shown o the screen. Choose the option to install out-of-box / factory settings and just follow menu on the screen.

• How can I send the documents that I did on my apple system Windows uncoded based

  Dear Apple Forum;

  I managed to send documents by e-mail or a windows-based system, I did on my apple system, but unfortunately they show in an unreadable code style, or sometimes it says: cannot open the document, or there are no applications. to open these documents. My question is how can I send documents that I did on my apple system, e-mail or / Windows based not coded or if there is any APP or platform to do so, your help and your knowledge, research appreciate your response, thank you.

  Best regards, Omar Alhussaini.

  Alghir Omar Sabah,

  What software did you use to write documents? Pages, Word or open Office?

  mAh Salam

  Leo

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• iCloud on Preferences system keeps asking to check the apple ID! ?

  Today, my new MacBook, under system preferences ask me to put my password. My password is correct, but as soon as I do, on the page of system preferences. It says at the top "Enter your password to continue using iCloud" and under neath ' verify the password Apple ID for my @icloud.com.» I can go under iCloud.com. Also connect my apple id fine page for you. My iPhone 6 s work singing in. Just my Macbook keeps it doing so.

  Also on the left side under my profile photo and name icloud.com. Where the account Details button is not available to select. If I sign it appears will erase all the documents and files on Mac.

  Help, please! I have tired everything I know to do and lost...

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Place the following in the trash, then restart.

  Close all running applications. Put the following in the Trash:

  (1) in the folder ~/Library /, put the Caches folder to the trash.

  (2) in the ~/Library/Application Support / folder, put iCloud folder to the trash.

  (3) in the ~/Library/Preferences folder /, put the MobileMeAccounts.plist file in the trash.

  Taken from Kurt Lang

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• My laptop has Windows Vista Home Edition as the operating system, I can't sync my iPhone for it.

  Any suggestions on how to sync my iPhone to my PC? I have Windows Vista as operating system.

  Thank you

  Hello

  There is an Apple Help link at the bottom of the link I gave you

  you try to syn software Apple with Apple hardware

  I suggest you contact Apple

  or try their forums

  https://discussions.Apple.com/index.jspa

• Problems installing the Apple updates. System error program cannot start because MSVCR80.dll is missing on your computer. "

  Original title: I am a computer newbie, could someone explain/direct me?  Many thanks, Mark

  Recently, I received an Apple update normal I-tunes.  Have done a little before, never with a problem.  This time, it seemed that everything was fine, then at the end (when expects a message "successfully installed", I received an error box with this: APS Daemon.exe - error system, the program cannot start because MSVCR80.dll is missing on your computer.)  Try reinstalling the program to fix this problem. "Well, since nothing else seems to work (or helping) and my music files have been backed up, I uninstalled I-Tunes successfully, then attempted to re - install.  I had to download the installation of Apple, which was very good. Once again, everything seemed to go smoothly, installation, etc. until it got to the point when he said "Marketing Services".  Then, as before - everything stopped and jumped up to the exact same APS Daemon.exe - error box system (with the same message) referencing MSVCR80.dll once again, saying that it is missing and try to reinstall the program.  From now on, I don't know exactly what that means (I know, I know) or if it's something someone like I could fix (or even try), or if I should just run down to my local computer store?   Never had any problems with the Apple or Windows updates before this one.

  Thank you to everyone how wants take a few minutes and help a person who has started working on computers far too late in life!
  Sincerely, mark Hawk

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  ___________________________________________________

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm 

  __________________________________________________

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Windows 7 doesn't have a network card after that I did a clean install of the operating system

  After doing a reinstall full Windows 7 my manufacturer's CD, I can't connect to the internet or a LAN wired or wireless, probably because the BONE is not an installed network card, in accordance with the resolution of the problems Windows. I reinstalled the operating system again and again, and I still have the same problem. What can I do next to install the network card? I am ignorant full when it comes to Windows/Apple stuff (I'm a Linux user, but I need a Windows PC to run specific working software) so thank you in advance for any help.

  Hello

  Welcome to the Microsoft community.

  It seems that the driver for the network adapter does not work on the computer. May not have been installed properly.

  Please answer these questions so that we can better help you.

  1. What is the brand and model of the computer?

  2 was the work of (internet) network adapter before the reinstallation of Windows 7?

  3. What is the status of the NIC in Device Manager?

  To check the status of the device,

  (a) press the Windows key + R , type devmgmt.msc and press enter.

  (b) to expand network adapters and verify a yellow exclamation point.

  (c) make a right click the adapter and click Properties and check the device status on the general tab.

  We have to download the drivers for the network card on the system manufacturers site and install it on this computer.

  Get back to us with the required information for we can help you.