Windows Update does nothing...

Similar Questions

• Pavilion G7 1355 A9Y70EA: windows update does not

  I had to do a complete reinstall of my windows 7 and even recovery if everything else seems in good condition, the function of windows update does not work despite my now do a restore complete 3 times and also executes all microsofts fix programs for this problem, also tried several fixes YouTube, but nothing works , are getting desperate now. He said only updates and the small bar just keep on crossing of forever with nothing else to be... Help...

  Thans for the answer, I understand what you say, it's just that, until I discarded the computer a few days before (by foolishly following a tip to youtube to speed up computer that has totally stopped it start) windows update worked very well and it has been since a windows 10 installation and a removal of windows 10 the next day a few months ago. The folder c:\Windows\SoftwareDistribution/windows/download exist with only 2 files with names very long gibberish and it is only 15 kb and the other file is 39 k, which seems to be far big enough for any update. I was wondering if instead of the clean install from the recovery partition would be any different doing a clean install from the recovery disks that I did when I got the laptop? see you soon

  Made no difference with update disk and these 2 small updates are only updated Adobe and after 3 off straight, the bar is still meandering along, my update history shows only updates from 2012 when win7 was installed everything first... * beep * Microsoft!

  P. S.

  Yesterday, I decided I had enough and started to install windows from a download 10 earlier, but after it began, I thought "no you know you hated" so I canceled the installation. That's about 3 hours later when I went to stop the laptop it says close and install the updates, so, after 4 hours of installing updates 251 and restarted then installed another 41 updates, then again on the next closure, so basically, I think that the few installation the windows 10 made seemed to start updates to speed?

• Windows Update does not (error 0x80000ffff)

  original title: Windows Update does not work

  Vista Home Premium
  Service Pack 2

  I recently updated my hard drive. 500g to 1 T. Transfere/clone old drive to the new drive with Seagate Software.

  Now, I can't run Windows update. I get a message that windows update may not run because the service is not running. You may have to restart your computer.

  • I restarted my computer and I still get the same message.
  • I run services.msc and it says that the service is started. (auto delayed)
  • I tried to run the windows update agent and I got this error 0x80000ffff

  How can I get the service that is running correctly and get windows updates. Windows crashes me because of the change of equipment? Nothing led me to reactivate. If I need to reactivate, how I do that. I see nothing in the system menu.

  Thanks for any help.

  Bruce

  Note here: http://www.taurarian.mvps.org/WU_Vista/8000ffff.htm

• Windows update does not not no malaware or tried virus TDSS killer system all ok

  Windows Update does not work not turned after a clean installation, System don't own no malaware, nothing tried virus TDSS Killer everything ok.

  Bruno & sam,

  Try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us

  06/02 / 1111:38: 14:00

• Windows 7 reports as "Not true" after replacement drive. Windows Update does not work. Any idea?

  I got a report that my drive was in imminent danger of failure.   Bought and made a direct disc-copy of the old disk cloning.    Everything seems to work fine, but now I'm getting the pop up that says Windows is "not true."    Windows shows as active, and nothing I've tried will stop the pop-up.  Worse, Windows Update does NOT work, and without running a few updates, I'm dead in the water for the use of new devices.

  I ran MGADiag.   Here is that content.   Any help is greatly apprectiated!

  ----------------------------------------------------------------------------------------------------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3615725035-2700926363-1652036055Dell Inc.. Inspiron 1545 Dell Inc.. A11 20090827000000.000000 + 00070FD3607018400F804090409Central Standard Time(GMT-06:00)03DELL WN09 100100Microsoft Office Enterprise 20071264BC76978749586GW6PzcEVEDTVKeO5Ym5UUm41dBk =89388-707-0441865-6559414100Microsoft Office home and Student 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3312009
  Installation ID: 004293808462381663381400261494038926624675101980836995
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 22/06/2015-13:55:06

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 6:22:2015 11:15
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqj + MrAO2jOkW3YOKB9UbRq90qZGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  SSDT PmRef CpuPm

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• Windows Update does not open in Mode safe while trying to install updates that are not installed in the usual way

  My computer will not install the important updates Service Pack. Support.Microsoft recommend safe, but in view Mode Setup without failure, you can not open the program update of Windows (from all programs). If I left click or right click and open nothing happens except that I immediately back to the Safe Mode screen.

  Hello

  • What is the antivirus installed on the computer program?
  • You receive an error message?

  I want to say that windows update does not work in safe mode.

  I suggest you follow the below methods that can help you solve your problem.

  Method 1: You can download Service pack 1 in normal mode and install in safe mode.

   

  Method 2: If above does not work, follow the procedure below:
  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

   

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

   

  Step 2:

  I suggest that you put your computer in a clean boot, try to install service pack 1 and control.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

   

  See also:

  http://support.Microsoft.com/kb/2505743

• Windows Update does not

  my windows update does not work. whenever I try to update says internet explore cannot display the Web page. and say what you can try: diagnose connection problems. my connection is good. What's wrong!

  What browser with version number that you are using?

  fix it for me http://support.microsoft.com/kb/956196

  If all else fails it could actually be an infection that prevents the download. to ensure that your system is free from all threats and then repeat the download. You can run a scan online free at windows live onecare security scan windows 7\vistahttp://onecare.live.com/site/en-us/center/whatsnew.htm windows live onecare safety scanner windows xphttp://onecare.live.com/site/en-us/default.htm wait your computer will be unavailable for a while. do not work on your computer while the scanners however running, he messes things.

• Windows Update does not work. Microsoft Update NOT work.error code 80072EE2

  Original title: Windows Update does not work. Microsoft Update DOES not work.

  Automatic update does not work.  When I try to manually update I get error code 80072EE2.  I tried Microsoft Automated Troubleshooting Services.  Whenever it reports it has repaired errors, however there is no improvement.

  There may be another reason -

  Most popular right now: http://support.kaspersky.com/viruses/solutions?qid=208280684

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Windows Update does not work after new hard drive

  After you install the new hard drive, when I click on windows update, it opens, makes his scan, then I get the message, (the website has encountered a problem and cannot display the page) I have a Dell Optiplex 745 running XP Pro, Explorer 8, have tried several times and restarted, please help.

  What do you think of will be without safety last cumulative update for IE8 be manually downloaded and installed before going to windows update to nothing at all.  What will happen is the CPU at 100% and a whole lot of nothing else of fortification.

  Do not go in line with the hopes of getting the updates of windows after the installation of SP3.

  Disable automatic updates in Control Panel > automatc updates > disable automatic updates

  Start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  Get the exe to install offline full download for IE8 [should represent approximately a 16 MB file] and then install IE8 after SP3 and the decline of the ability to download updates for IE8 at installation time.

  Then manually download and install the current cumulative security for IE8 update and restart the computer.

  visit Windows Update through your browser link in the start menu.  Consent to any ActiveX install queries and validation / advantage genuine offer and cross your fingers.

  It is possible that you may still have questions, but this will reduce some of the problems if you follow the recommended sequence.

• Windows Update does not work on new installations of XP Pro

  Hello world

  I installed a new copy of Windows XP Professional on a Dell Precision, I am about to sell, but for some reason any Windows Update does not work. I reinstalled Windows many times, but I still get the same error in WindowsUpdate.log:

  Detection of triggered via api DetectNow
  Received at THE 1 event
  Customer WU succeeds CClientCallRecorder::BeginFindUpdates of AutomaticUpdates with call id {4602F49D-1C30-4205-A0D7-8C4C7143D7A8}
  Customer WU execution call {4602F49D-1C30-4205-A0D7-8C4C7143D7A8} search Call type
  Verification of the different redirector to: http://download.windowsupdate.com/msdownload/update/v5/redir/wuredir.cab
  Verification of the different redirector to: http://download.microsoft.com/windowsupdate/v5/redir/wuredir.cab
  Verification of the different redirector to: http://windowsupdate.microsoft.com/v5/redir/wuredir.cab
  Could not download redirector ACR on test 3: 0x800b0003
  GetWuidentUrlFromRedirector failed due to error 0x800b0003
  IsUpdateRequired failed with error 0x800b0003
  Trying to get proc active data store
  Out-of-proc datastore is now active
  PT: ServerID using {9482F4B4-E343-43B6-B170-9A65BC822C77}
  PT: By using the server URL https://www.update.microsoft.com/ClientWebService/client.asmx
  PT: Calling methods on server
  Add the header accept-encoding: xpress succeeded
  DetectCompressionType return of type 1, hr = 0 x 0
  Methods: 0x8024400a
  PT: Cannot retrieve fault, origin = methods, hr is 0x8024400a
  Synchronization of updates: 0x8024400a
  Customer WU didn't search for update with 0x8024400a error
  Search booster failed, hr is 0x8024400a
  Affecting detection next time to 2012-08-10 07:38:03
  Customer WU reminded AutomaticUpdates with call failed call to search and 0x8024400a error code
  Customer WU complete and delete call {4602F49D-1C30-4205-A0D7-8C4C7143D7A8}
  EVENT REPORT: {3C043957-5881-4F80-8885-81F17DCEC18E} 17 2012-08-09 16:37:59-1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 800b-0003 0 SelfUpdate failure software sync error: Agent failed detecting with reason: 0x800b0003
  EVENT REPORT: {96CC9537-3732-4A2E-B0E3-81C52B13B4BB} 18 2012-08-09 16:38:03-1000 1 148 101 {00000000-0000-0000-0000-000000000000} 0 AutomaticUpdates 8024400 failing software sync error: Agent failed detecting with reason: 0x8024400a

  I tried with and without Avast! Antivirus installed.

  Any suggestions are greatly appreciated - it drives me crazy!

  Thank you!
  Kyle

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941

• Windows Update does not... (error 0x800A0046)

  original title: Windows update does not...

  Windows Update will not work... asked me to define my security settings for IE (userdata persistence) that has actually been the correct way. I even tried the www.update.microsoft.com movement in a trusted location. I keep getting error (0x800A0046) even with the persistence of data user defined correctly and this field set to always allow cookies. Any ideas?

  It's on Windows XP sp3, IE 8. I have some problems with Visual Studio 2008 and just uninstalled/reinstalled this weekend and noticed this problem when I went to look for updates after a fresh install.

  I did have previous problems with updates on this machine.

  http://support.Microsoft.com/kb/910338/en-us

  http://support.Microsoft.com/?kbid=883821

  UTC/GMT is 22:02 Sunday 16 October 2011

• "Windows update does not" error code unknown 800070005 ". By Christmas thanks for the previous answer.

  Windows Update does not. All solutions?

  Thank you, in advance.

  Hello

  It is a very difficult to solve. What are the items in the KB if it has shown that the installation of not?

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  Those are kind of prerequisites and probably will not solve the problem.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on
  Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  Its usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Hello!

  the mechanic system?
  It's what has helped us to

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  Restart the PC and try to install the updates again

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  * We had system mechanic and I uninstalled it since I discovered that it corrupted my windows installer.

  Hope this helps

  Microsoft KB article

  http://support.Microsoft.com/kb/2642495

  Thank you!

  Makoi

• Windows update does not work and displays C80044E error code.

  Windows update does not work and displays C80044E error code.

  Hello

  I suggest you to try the steps below and check if it helps.

  View update history.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Let me know the description the updates that do not have the status.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists then try to set your computer in check and clean boot state, if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  More information: The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.