Windows Update, error 80072efd y at - it repair for vista sp2.

Similar Questions

• Windows update error 80072EFD

  Hello
  I have a laptop of old P750 for 2 months, after they need to do a restore to a disk upward, I now get the above error.
  I then decided to do a cover of toshiba with a clean install and still get the same result of windows update is not not able to connect to the server.

  I tried everything I can find this error, including the verification of the proxy settings for WU, reset the proxy via CMD prompt settings.

  I noticed something interesting while control validation using microsoft MGA diagnostic tool, where windows has been listed as a hat, but note some reports as:

  Validation code: 0
  LegitCheckControl: N/a, hr = 0 x 80070002
  signed: n/a, hr = 0 x 80070002

  My understanding is the way to 0 x 80070002 he couldn't connect identical to WU or that files are missing.

  I have rebuilt that recommended such c:\Windows\SoftwareDistribution records, turned off all firewall, removed antivirus / software malware but still no luck.

  It seems funny how the same thing happens even after a clean drive toshiba recovery.

  Any suggestions?
  BL262000

  Hello

  If you check Google and error code 80072EFD you will find many pages where you can find explanations why should be done about it.
  It's typical Microsoft problem and the solution must be sought by Microsoft.
  Have you checked
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f?

• I get this error code, Windows Update error 80072efd can help me please. I have windows vista on my lap top.

  I tried to do what he suggests using windows, that is to

  To add the Windows Update Web sites to a firewall exceptions list, I think I did, I have norton 360 still does not work.

  Problems began on 06/02/09 all trying to update internet explorer 8.
  Vista service pack 2 failed to download also the two with the same error code
   

  Hello

  Basically, you have a firewall blocking updates. Stop or uninstall Norton, using their removal tool and
  Try updates.

  Download - Save - go to where you put it - right click on – run as administrator

  Norton Removal Tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Make sure that IE can work and is allowed in the firewall also.

  Windows Update error 80072efd
  http://windowshelp.Microsoft.com/Windows/en-us/help/93b6ab71-8B21-4B50-B40E-abb80eba29271033.mspx

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update for
  install updates
  http://support.Microsoft.com/kb/836941

  Unexplained computer behavior may be caused by deceptive software
  http://support.Microsoft.com/kb/827315
  Also, run the fixit:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  -----------------------------------------------
  If you still have questions, you can open an incident report for free.

  Go here and and click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows update error 80072efd on Satellite A200

  Hello

  Doesn t work on my Satellite A200 Windows Update. When I try to search for new updates, after ten minutes is displayed error 80072efd. Of course, I ve done all proposed solutions, but no result. OS is Vista Home Premium and it has that Norton Internet Security is installed as a firewall.

  I tried starting windows update when Norton firewall has been turned off, but the result was the same error 80072efd.

  Anyone know what I can do more?
  Concerning
  Piter

  Hello

  Have you already checked this article http://support.microsoft.com/kb/836941?

• Windows Update error 80072efd and 0x80072efd code codes.

  I have Windows Vista and my system will not allow me to do my Windows updates in Windows and Windows defender.  I have error code 80072efd and 0x80072efd.  I looked everywhere to help solve this problem.  Pls help me to solve this problem I tried everything.

  Hello

  You should not have two large even antivirus programs on the same computer, much less running. Then
  You must uninstall AVG, or McAfee. Please use the removal tool for the one that you want to uninstall.
  If you just uninstall it without the removal tool, they will leave problem causing remains.

  Download - SAVE - go where you put it - right click-RUN AS ADMIN-restart when full.

  AVG Remover Tool (avgremover.exe; avgremoverx64.exe)
  http://www.Avg.com/us-en/download-tools

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  SuperAntiSpyware could have a role as well, it loads several pieces memory-resident.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update error 80072EFD. No. MS solutions work. Cannot download anything MS Download Center.

  I tried to use windows update. Gave me an error code. I tried to use alll the troubleshooting on the microsoft site. nothing seems to work. I disabled anti viruse software, firewalls. My goal is to get the update, so I can get .NET framework and XNA 3.0 Redistributable to work. I've tried manual install for those, but they become download update of this time-out after 5 tries and give up.

  When I go to the Download Center, click download links, the pages go dead.

  It's like something on my computer is BLOCKING everything Microsoft.

  EDIT: I don't know why he put that in windows 7, but its for windows vista.

  Sorry, but I have nothing to add here, except for...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527 
  or https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  Good luck!

  I look at this thread is no longer

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update error 80072efd prevents updates from mircosoft. I have AVG 2011

  How can I add exceptions for the AVG program. I'm not not very literate PC.

  See if this thread is useful.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a2141fe0-cfc8-4480-B854-80e24098cb9b>

  UTC/GMT is 11:04 Thursday, May 31, 2012

• Vista Windows update error after update sp2

  I've upgraded to SP2 for windows vista in May 09... Since then, all windows updates fail with an error code 80072efd.
  Firewall is NOT the issue here... Help, please!

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Windows Update error 80072efd
  http://windowshelp.Microsoft.com/Windows/en-us/help/93b6ab71-8B21-4B50-B40E-abb80eba29271033.mspx

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install the Windows update error code: 0x80072efd.

  OT: Laptop problems.

  I have the following problems: has) the update of Windows Defender does not work, always ends upward with an error code: 0x80072efd,.

  (b) installation of Windows Update problem is not solve itself now for some time - quite impossible update.

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  or

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

• Windows update error 8007007F said. When I tried to download whatever it is, including the "Fix it" or repair of Microsoft I have error-1073741701

  Windows update error 8007007F said. When I tried to download whatever it is, including the "Fix it" or repair of Microsoft I have error-1073741701. I can't change my clock, I can't download anything.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista, windows update error Code 80072F8F

  I get the error code 80072f8f. I searched the forums of discussion for something that will help, but nothing helped. I also lost the ability to use the system restore. I checked my timestamp in windows and it shows the date and time correctly. I even went into my bios to make sure that my system time was correct. Both are. I went to this Web page http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10acefdc-297f-4d14-9f5c-5a90250a8b8c and followed the instructions but had no luck either.

  I don't know if system restore is a symptom of the same problem or one of its own. I ran into this problem when I tried to install a netgear 311t wireless network card. I have since deleted from the card and uninstalled the software, I don't know if the map was part of the question, but I noticed when I tried windows update in order to get a driver for the card. I am running Windows vista Home premium 32-bit on a Pentium D 3.00 ghz with 3.5 g of ram. Any help would be great. Thank you.

  Chris

  I was afraid you might say that!

  OPTION 1: Contact the Symantec Support.

  OPTION 2: Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool (new) before installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (e.g., SAV, Microsoft Security Essentials - free).

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• I get the Windows Update error 80070490 blues! -Vista

  Original title: I get the Windows Update error 80070490 blues!

  I am running: Windows Vista Ultimate 32-bit & Internet Explorer 7 (impossible to upgrade to IE8). I've beaten my head against the wall for well over a month now because I can't seem to install the following updates without entering a code 80070490 error:

  KB975467

  KB959426

  KB968389

  KB970430

  KB971737

  I did the following in all possible combinations in an attempt to install these updates:

  Disabled user account control

  turned off the Windows Firewall

  disabled my antivirus (Avira Anti - Vir Personal)

  To put it succinctly, I can't think of anything to do after following all of the ideas, tips & suggestions help Section!

  Help, please! All I can think to do now is to get some black candles and sacrifice a rubber chicken!

  Wouldn't you...

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• Windows update error 0 x 80248011 windows xp - have tried most of the solutions here

  Try to get updates for my HP running Windows XP Media Center addition version 2002 with Service Pack 3

  I recently put Norton Antivirus on my computer, none of the others are having this problem, but it's the single XP computer we have.

  Get this error when I try to use windows update: 0 x 80248011

  I ran FixIt tool and he says that he finds the problems and fixed them. It wasn't true, it always gives me the same exact error and can not get updates of window on my computer. That's what he said when I select the option to tell him what to the difficulty:

  Details of the update of Windows editor

  Problems found
  Components Windows Update must be repairedWindows of update components needs to be repaired
  One or more components of Windows Update are configured incorrectly detected
  Fix the Windows Update components not running
   
  Verified issues
  By default Windows Update data locations have Windows Update changedDefault data locations have changed
  The location where the Windows Update stores data has changed and must be repaired Checked

  Problems found details

  Update Windows 6 components must be repaired detected
   
  One or more components of Windows Update are configured incorrectly
  Fix the Windows Update components not running
   
  Repairing the Windows Update components frequently solves common Windows Update errors

  Issues checked the details of the detection

  6 Windows Update default data locations have changed Checked
   
  The location where Windows Update stores data has changed and needs to be repaired
  Fix the Windows Update default locations will not run
   
  Moved from Windows Update to the default settings of Windows

  Details of detection

  Collection information
  Computer name: ZACHCPU_XP
  Windows Version: 5.1
  Architecture: x 86
  Time: 01/05/2013-16:04:18

  Publisher details

  Windows Update
  Problems that prevent you from Windows Update.
  Package Version: 4.0.2.20110411
  Publisher: Microsoft Corporation

  Try to get updates for my HP running Windows XP Media Center addition version 2002 with Service Pack 3

  I recently put Norton Antivirus on my computer, none of the others are having this problem, but it's the single XP computer we have.

  Get this error when I try to use windows update: 0 x 80248011

  I ran FixIt tool and he says that he finds the problems and fixed them. It wasn't true, it always gives me the same exact error and can not get updates of window on my computer. That's what he said when I select the option to tell him what to the difficulty:

  Details of the update of Windows editor

  Problems found
  Components Windows Update must be repairedWindows of update components needs to be repaired
  One or more components of Windows Update are configured incorrectly detected
  Fix the Windows Update components not running
   
  Verified issues
  By default Windows Update data locations have Windows Update changedDefault data locations have changed
  The location where the Windows Update stores data has changed and must be repaired Checked

  Problems found details

  Update Windows 6 components must be repaired detected
   
  One or more components of Windows Update are configured incorrectly
  Fix the Windows Update components not running
   
  Repairing the Windows Update components frequently solves common Windows Update errors

  Issues checked the details of the detection

  6 Windows Update default data locations have changed Checked
   
  The location where Windows Update stores data has changed and needs to be repaired
  Fix the Windows Update default locations will not run
   
  Moved from Windows Update to the default settings of Windows

  Details of detection

  Collection information
  Computer name: ZACHCPU_XP
  Windows Version: 5.1
  Architecture: x 86
  Time: 01/05/2013-16:04:18

  Publisher details

  Windows Update
  Problems that prevent you from Windows Update.
  Package Version: 4.0.2.20110411
  Publisher: Microsoft Corporation

  clear the cache of Internet Explorer. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click delete files in the Temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows \SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.

• Windows update error code: 80246008 80240016, 0 x 80070424

  Original title:

  Cannot install windows updates. Receive code 80246008 or code 80240016

  Can not update virus for window s Essentials-error definition 0 x 80070424

  After many unsuccessful attempts, I found a solution that seems to have worked for me regarding the replacement of the registry BITS without entering regedit.
  See Nirmal S entry into following a link and do exactly as directed. Then, restart your computer.
  Note: that I've scanned my computer everything several times with Microsoft Security Essentials to get rid of the Trojan malware first. Then I followed the instructions of Microsoft for the repair of the Windows Update error 80246008 preceding.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-do-i-replace-the-missing-background/5b659487-f4ec-4F67-B352-e9d5af8b5a99?auth=1

  Good luck.