Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)
Original title: Windows Update stopped working Vista Home Basic.
HP laptop 550 Vista home basic 32-bit. Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.
Hello
Question: Windows Update has stopped working
1. do you get an error message when you try to update?
2. were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below.
The problems with the installation of updates (Windows Vista)
Question: display Error Code 43 adapter has stopped the unit
Run the Fixit and check if it helps.
Hardware devices do not work or are not detected in Windows (Fixit)
Hope this information helps.
Tags: Windows
Similar Questions
-
NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.
Message that appears is: -.
Windows has stopped this device because it has reported problems. (Code 43)
BB
Install the latest driver from nVIDIA:
http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html
http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Original title:
Problem occurs intermittently, but almost every time at the first start the morning. The problem can be seen during the POST and the rest after logon. After several reboots, he can come good, but at the next restart could be bad. One clue is that the Device Manager said that to display card NVIDIA Ge Force 8400 GS that "Windows has stopped this device because it has reported problems (code 43)." Driver update says I have the latest driver insalled, version 8.17.12.9573. Help, please
Have you tried to update your BIOS? Are there updates the firmware for your video card?
-
I have Windows 7 Ultimate. Recently an unknown device keeps popping up in the device manager every time that I start to win. It is reported the location is in the front USB hub, but I haven't changed it anything lately. The device status says "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall or disable it but it will get picked up again the next time that I reboot. All other usb devices (mouse, keyboard, webcam, UPS APC, external hard drive, printer) work very well. How can I get rid of this nuisance so that it is not reappear?
If the problem coincided with connecting the inverter APC that may indicate the problem is with the inverter.
Somewhat similar situation discussed in the following link:
http://www.velocityreviews.com/forums/t527369-APC-ups-USB-as-unknown-device.html
Your situation sounds similar as "Information system" leading the 'problem of the device' has an error Code "this device is working properly" but still "unknown device".
I would say to detach from the APC UPS of the computer and uninstall any software related.
Restart the computer and see if the "Unknown device" problem resolves.
-
A usb driver for microsoft
Windows has stopped the device because it has reported problems (Code 43) Standard USB HOST Controller, location of port #0002 Hub_ #0005
Right click on desktop, select Properties. On the next page, top left click on Device Manager.
Scroll down the page until you come to the Universal Serial Bus Controllers and double click on this.
Uninstall ALL USB host controllers. (Remember that when you have finished the last of them, your keyboard and mouse may not work!) Restart the PC. Windows should then pick up the controllers & install the correct drivers. The only time where it will not install the drivers is when the USB host controllers are physically damaged. In this case, the fastest and cheapest method is to buy a USB PCI card which fits directly into a PCI slot on your motherboard and will come with three or four USB 2.0 ports.
-
Windows update does not work and displays C80044E error code.
Windows update does not work and displays C80044E error code.
Hello
I suggest you to try the steps below and check if it helps.
View update history.
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
Let me know the description the updates that do not have the status.
Method 1: Try to reset components to update Windows from the following link and then try to install the updates.
http://support.Microsoft.com/kb/971058
Method 2: If the problem persists then try to set your computer in check and clean boot state, if the same problem occurs.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
More information: The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesHope this information is useful.
-
I updated my newly installed Windows 7 Pro (64) and many update took place, BUT...
I have a few updates that will fail and she keeps offers the update of these points - I noticed that he often has to do with something related 64-bit.
How document and fix this?
Welcome!
See if using the auditor system in Windows files can repair the files of Windows updates:
https://support.Microsoft.com/en-us/KB/929833
Similarly, you can reset Windows updates by following this here:
https://support.Microsoft.com/en-us/KB/971058
-
* Original title: software problems
Whenever I open my Kodak easy software, that he told me that he stopped working and no solution to the problem. How can I fix this?
To allow a person to better help you, can you provide more information please.
for example:
- What is the full name of the 'software kodak easy' AND its version number?
- Is it intended to be run on this version of Windows 7, or if it was originally intended for an earlier version of windows?
- What is the exact error message when it does not work?
- He has already worked on this computer? If so, when did it stop working?
If it is your program - http://support.en.kodak.com/app/answers/detail/a_id/36670/selected/true - it seems that it is no longer available for Windows.
If you have a 64 bit OS, it can help - http://support.en.kodak.com/app/answers/detail/a_id/30535/~/easyshare-software-on-64-bit-computer-running-a-windows-7-or-windows-vista/selected/true
If it ran on an earlier version of Windows, but will not work on Windows 7, try running mode of compatibility - http://www.sevenforums.com/tutorials/316-compatibility-mode.html - which may allow some older programs to run on a later version of the operating system.
-
SP1 update has disabled the startup. Please help (error 0x8007000E)
original title: SP1 update has disabled the startup. Help, please
I ran the upgrade of windows (84 files) and restarted the pc, checking upgrade again and he said updated service pack 1 or SP1 so I start making level and after a long time its still shows the installation but the icon in the lower right shows 100% so I clicked on cancel and then restarted the pc.
Now Im getting a Startup Repair error box that search startup errors but says "Windows cannot repair this computer automatically. I can click on 'Finish' or 'Cancel' if I click on end it shuts down the pc if I click cancel it reboots the pc. another box pops up that says "Startup Repair cannot repair this computer automatically.
My options are 'Send info on this problem (recommended)' or 'do not send' if I click it scans a second and then the box goes away leaving the 1st box of error described above.I tried to hit F8 and using 'repair your computer' this is for me the box of system recovery options. Sign in with my user name and password to choose a recovery tool.
- Startup Repair
- system restore
- restore complete Windows pc
- Windows memory diagnostic tool
- command prompt
- Recovery Manager
I tried startup repair, but get the same message as above.
I tried the system restore (which does not affect any of my files, documents, etc..) Then he said: choose a restore point that I want to use, but the only option is the 31/05/2011 install Windows Vista Service Pack 1... then I go ahead and try it and it says it will restart my pc and apply the changes. It initializes, file restore, then a box pop up saying system restore has failed. has failed because of an unspecified error. Not enough memory is available to complete this operation. (0x8007000E)So I try here this forum...
Question: Lets say there's someone who can get my pc back to normal... what I need updated SP1 and SP2?Hello
Not having the system restore, you can try a different restore point and check. If the problem persists, then you must try a startup repair and system restore boot from the disk Installation of Windows Vista.
You can try to disconnect all the external devices (except keyboard and mouse) and tries to boot from the disk and check.
For more information, consult the following link:
What are the system recovery options in Windows Vista?
You can also check out the following link and check error 0x8007000E
Common causes and solutions to the problems of backup, System Restore and computer backup
Hope this information is useful.
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
-
How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. Meanwhile, I'm 13 days until it stops working due to not be enabled. Help? I really need to continue to use this product for my home business. It works very well not activated but the threat is that it will stop working in 13 days more if I don't get activated, and none of the activation methods that they list seem to work.
You can download CS2 if you have a valid license for CS or CS2.
And you have to follow the instructions and use the download again AND the new serial number.
-
My computer crashed while I couldn't remove my CS5 Master Collection. I used my disk to load the program on my new computer. It worked but updates don't work nor bridge will recognize the raw files from my Canon 5 d Mark111. He acknowledged previously. Now, he says to convert to DNG, so I tried this but bridge is not to convert photos (even if it does not convert the raw files from my previous cameras).
Try direct updates
https://www.Adobe.com/downloads/updates/ -
ESTABLISHING A NETWORK.
My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?Hello
1. don't you make changes on the computer before the show?
2. what version of operating system you are using on the computer?
3. which network you're talking about (home wireless network or group)?
4. which steps have tried?
If you use a group home on the computer, see the link for more information.
Home Sweet homegroup
http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-wayYou can also check out the link.
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126Provide us more information for you to help. -
I face a problem in photoshop cc 2015. When I close a tab, then a pop - up massage a problem caused the program to stop working correctly. Please close the program. solve this problem
Try to uncheck 'use graphics processor' in preferences and restart Photoshop.
-
I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please
Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.
Maybe you are looking for
-
Windows Setup does not load driver Marvell D20
Hello Installation: D20, the Marvell controller are attached: 2xHDDs RAID1 and an Intel SSD in a RAID configuration. The machine was initially installed with Windows 8.1 (on RAID1 disks), most later improved to W10. After a recent, (unknown to me), W
-
Looking for a plug-in scan from Photoshop new version CS4
Hi, is there anyone who can tell me where to find a plugin update to run HP Scan Pro Photoshop via the menu 'import' command, as in ancient times the? Running the tool to update software of HP only returns a message "no new software not found." And t
-
I forgot my user password for my XP computer
To start the computer, that I have set up the password of auser a/c. But I forgot the password. How can I get my password. The indication of password gives me a Word. But still I don't remember my password. Help
-
How to disable the physical volume knob when when my app works? I want to control the volume of the sound that my app plays without letting the user control by using the phyical volume buttons. The only way that the user controls the volume is via th
-
Supports XPS 8900... ?
Hello. I was interested in buying an XPS 8900. I was wondering if anyone knew the maximum capacity of the storage space on this computer. On the description of the product, he said maximum 2 TB for storage. Not that this means it will support up