Windows updates do not work

I'm unable to all windows updates. There is an error code 80070641. Today it completed the 1/5 type 'important' updates Any ideas? Thank you

See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/reg-servo/f6ded75b-fbac-4475-bcd5-411f5f77a343 re REGSERVO.

SFC suggestion: http://support2.microsoft.com/kb/929833/en-au

Tags: Windows

Similar Questions

Windows Update does not work. Microsoft Update NOT work.error code 80072EE2

Original title: Windows Update does not work. Microsoft Update DOES not work.

Automatic update does not work. When I try to manually update I get error code 80072EE2. I tried Microsoft Automated Troubleshooting Services. Whenever it reports it has repaired errors, however there is no improvement.

There may be another reason -

Most popular right now: http://support.kaspersky.com/viruses/solutions?qid=208280684

TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

Windows Update does not work. No error message.

Laptop HP G662 running under Windows 7 64-bit:

Despite linking all the troubleshooting tips web that I can find my Windows Update will not work and did not work because I replaced my hard drive about a year or two ago. No error message appears.

I don't know what software / driver download for this problem. Can you help me? Peter.

Hi Peter

I did some research and found out there are a few prerequisite updates that may be required for installation of Internet Explorer 11. This Microsoft Support link has the list and downloads for the required updates.

I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

Good luck!

=======================

Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Windows Update does not work on new installations of XP Pro

Hello world

I installed a new copy of Windows XP Professional on a Dell Precision, I am about to sell, but for some reason any Windows Update does not work. I reinstalled Windows many times, but I still get the same error in WindowsUpdate.log:

Detection of triggered via api DetectNow
Received at THE 1 event
Customer WU succeeds CClientCallRecorder::BeginFindUpdates of AutomaticUpdates with call id {4602F49D-1C30-4205-A0D7-8C4C7143D7A8}
Customer WU execution call {4602F49D-1C30-4205-A0D7-8C4C7143D7A8} search Call type
Verification of the different redirector to: http://download.windowsupdate.com/msdownload/update/v5/redir/wuredir.cab
Verification of the different redirector to: http://download.microsoft.com/windowsupdate/v5/redir/wuredir.cab
Verification of the different redirector to: http://windowsupdate.microsoft.com/v5/redir/wuredir.cab
Could not download redirector ACR on test 3: 0x800b0003
GetWuidentUrlFromRedirector failed due to error 0x800b0003
IsUpdateRequired failed with error 0x800b0003
Trying to get proc active data store
Out-of-proc datastore is now active
PT: ServerID using {9482F4B4-E343-43B6-B170-9A65BC822C77}
PT: By using the server URL https://www.update.microsoft.com/ClientWebService/client.asmx
PT: Calling methods on server
Add the header accept-encoding: xpress succeeded
DetectCompressionType return of type 1, hr = 0 x 0
Methods: 0x8024400a
PT: Cannot retrieve fault, origin = methods, hr is 0x8024400a
Synchronization of updates: 0x8024400a
Customer WU didn't search for update with 0x8024400a error
Search booster failed, hr is 0x8024400a
Affecting detection next time to 2012-08-10 07:38:03
Customer WU reminded AutomaticUpdates with call failed call to search and 0x8024400a error code
Customer WU complete and delete call {4602F49D-1C30-4205-A0D7-8C4C7143D7A8}
EVENT REPORT: {3C043957-5881-4F80-8885-81F17DCEC18E} 17 2012-08-09 16:37:59-1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 800b-0003 0 SelfUpdate failure software sync error: Agent failed detecting with reason: 0x800b0003
EVENT REPORT: {96CC9537-3732-4A2E-B0E3-81C52B13B4BB} 18 2012-08-09 16:38:03-1000 1 148 101 {00000000-0000-0000-0000-000000000000} 0 AutomaticUpdates 8024400 failing software sync error: Agent failed detecting with reason: 0x8024400a

I tried with and without Avast! Antivirus installed.

Any suggestions are greatly appreciated - it drives me crazy!

Thank you!
Kyle

You must be at Service Pack 3 level before you can use Windows updates.

To determine which service pack is currently installed on your computer, follow these steps:
1. Click Startand then click run.
2. Copy and paste, or type the following command, and then click OK:
winver

A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389

Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717

It is stated in "How to obtain the latest service pack XP" is.

If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

Download the Windows XP Service Pack 3 package now

See also: http://support.microsoft.com/kb/2497281
You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2. But since then, I had a very hard time updated. I even got again the WORC and had to go back to a previous restore point after installing IE8.

Windows Update does not work.

[Error number: 0x8024400A]

The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

For self-help options:

To support options:

Microsoft online assisted support (no cost for Windows Update issues

Hello.

Try the suggestions on this site:

http://support.Microsoft.com/kb/836941

After clean reinstall XP 2, IE6 continues to break down, Windows Update does not work, so I am unable to download 3 XP and IE8!

Need help to diagnose why, after a clean reinstall of original CD XP2, IE6 continues to break down, and Windows Update is not working correctly,

which means that I am unable to download XP 3 service pack or IE8.

Download sp3 from HERE. Save the file to your desktop. Double-click the file to install sp3 manually.

Edit: Link fixed.

Is anyway to download updates for XP sp1 if Windows Update does not work?

Today I installed Windows XP Home Edition and Windows Update will not work. I need sp2 for at least a few programs for school (office, Kaspersky Anti-virus) is anyway to download sp2 or transfer updates from my other computer that has sp3?

Install SP3 - http://www.microsoft.com/download/en/details.aspx?id=24

Operating systems supported: Windows XP Home Edition, Windows XP Professional edition, Windows XP Service Pack 1, Windows XP Service Pack 2

You can use this download to PC unique also.

Article read this first: http://support.microsoft.com/kb/936929

Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

Hello!

the mechanic system?

It's what has helped us to

Open Notepad.

Copy the following into Notepad and save it as fixme.reg

push all the files and then save it to your desktop.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

"ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

"LocalSystem ObjectName"=""

"ErrorControl" = DWORD: 00000001

"Start" = dword:00000003

'Type' = dword:00000010

"DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

"ServiceSidType" = DWORD: 00000001

"RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

00.00

"FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

Go to your desktop and double-click the file name fixme.reg

Restart the PC and try to install the updates again

or

Click Start.

Type regedit in the search field and press to enter.

On the registry change windows click on file and select import.

Navigate to the location where the fixme.reg file and select the file.

Click ok on the windows screen once the registry is merged successfully.

Restart computer and check if updates installs.

* We had system mechanic and I uninstalled it since I discovered that it corrupted my windows installer.

Hope this helps

Microsoft KB article

http://support.Microsoft.com/kb/2642495

Thank you!

Makoi

Windows Update does not work / "host process for windows services has stopped in.

Windows Update will not work. I get "host process for windows services has stopped from" I tried loading Microsoft 'fix it' in versions beta online and downloadable, and it does not load... starts to load, then an error message pops up he hit an unexpected error and cannot load. What can I try next? He

Good soft to hear than the fixed!

Windows update does not work and displays C80044E error code.

Windows update does not work and displays C80044E error code.

Hello

I suggest you to try the steps below and check if it helps.

View update history.

http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

Let me know the description the updates that do not have the status.

Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

http://support.Microsoft.com/kb/971058

Method 2: If the problem persists then try to set your computer in check and clean boot state, if the same problem occurs.

By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135

Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

More information: The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

Hope this information is useful.

Windows Update does not work after the hard drive has been replaced

Hello
I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
Problem still exist.
The message that I got while trying to update: "Windows Update cannot currently check updates,
because the service is not running. "You may need to restart you computer.
Stop and then restart the service, still no luck.

I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
The problem still exists.

The other post:

Another interesting fact:
After the reconstruction the new disk, user account control does not recognize Windows programs.
for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

Separated from the:

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

Go to control panel / system and Maintenance / administration tools

Select Services

Stop the Background Intelligent Transfer Service

Stop Windows Update

In 'My Computer' go to Windows / Software Distribution

Right-click "DataStore" folder. Rename it to Datastore.old

Rename the folder 'Download' Download.old

Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

Look for the updates. It will take some time because you deleted the database.

I hope this helps!

Profile of user does not periodically; Windows Update does not work

I had the "the user profile Service has no logon. Failed to load the user profile"and did a system restored about two months ago. I had the same error once again and followed the instructions that I got from a help forum to identify my user profile when the computer starts. Then I got the error again and did a system restored again. Two things have happened:

1. about every fourth time that I reboot, it loads to a temporary profile.

2. Windows Update does not work. The error that appears when I try to run Windows Update is 80070005 "unknown error."

Help! What's next?

Corruption of the profiles can be caused by several things: malware infection, bad drivers, corruption of file system of Windows due to stops unsuitable, due to lack of material (RAM and disk hard first "suspects"). You need to know what caused the corruption.

http://www.elephantboycomputers.com/page2.html#Removing_Malware

http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

MS - MVP - Elephant Boy computers - don't panic!

Windows Update does not work in Windows 7

Computer desktop running W7 Home Premium 64-bit. A month ago, realized that Windows Update was not working, hangs on "download updates". System checked for viruses, etc., and it is clean. No other changes have been made to this machine. Tried many suggestions offered here, no joy. My system is set up to notify me when updates are available, so I can install them. Lately, he has been erratic, showing different amounts of updates from one day to the other, but I'm not one of them to download.

Here's hoping that someone out there has a magic bullet, or at least a procedure that I can follow as a non-tech user, to get back on the right track.

The updated client is outdated. The value of the automatic updates to "never check for updates" and then restart. Download and install KB3161608

https://support.Microsoft.com/en-us/KB/3161608

and try again.

Best regards, VZ

Installing Windows 7 x 64 Professional SP1 - clean - Windows Update does not work

I installed a new drive and thought it would be good to spend my old data to the new. as the SMART ones showed count of offshoring. And the SATA interface is a little older.

I installed a clean copy on the new disk (disconnected one for the process, so I don't have the bootloader and all that things).

I started to install all the software I ususally use. I also went into the control panel and run the Windows Update tool to search for updates.

Unfortunately, he sjowed I have no update.

I checked in different positions and I tried:

-updates affecting various parameters - did not work

-try windowsupdate.com - did not work

-tried the MsFixIt for Windows Update - did not work

-Downloaded the Windows Update Setup program and tried to install it (it sort of the attempted to install but showed just a process bar work)-did not work

-a tried to update Windows after restart. -still not working

And now im lost what could be the problem. I turned off any application that could attempt to block my connection (dough im don't know if one of them would both need).
I don't know why but my Windows Update starts just not updated.

Windows 7 update problems? First read this.

:)

Diagnostic report (1.9.0027.0) and my windows update does not work.

Separated from this thread.

I have almost the same problem, + my windows update does not work.

Everything really slows down my PC

Here are my results with MGAD

Help please..!

Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->

Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - YG69F - 9M66D-PMJBM
The Windows Product Key hash: /kehptF9HHVxM5d8dUnqgcfndXw =
Windows product ID: 00426-OEM-8992662-00497
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {A4E726A5-77E8-42E6-AE5F-6F881531F528} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.110408 - 1631
TTS error:
Validation of diagnosis:
Resolution state: n/a

Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002

Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002

OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002

OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLK
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: E:\Users\Andersons family Inc\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed

Analysis of file data-->

Other data-->
Office details: {A4E726A5-77E8-42E6-AE5F-6F881531F528}1.9.0027.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-PMJBM00426-OEM-8992662-004972S-1-5-21-2881089878-228829905-3463415677MSIMS-7369American Megatrends Inc.. V2.0 20070612000000.000000 + 0000F5E3007018400F804260409FLE Standard Time(GMT+02:00)03103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6517814 ACD7202654E586

Content Spsys.log: 0 x 80070002

License data-->
The software licensing service version: 6.1.7601.17514

Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600497-02-1062-7601.0000-0032016
Installation ID: 013476459360581333553453351230301256370565945071587434
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: PMJBM
License status: initial grace period
Time remaining: 11640 minute (s) on (8 day (s))
Remaining Windows rearm count: 4
Time to trust: 2016.01.03. 14:38:33

Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x80070005
Output beyond bitmask:

--> HWID data
Current Hash HWID: NAAAAAIABAABAAEAAQABAAAAAQABAAEAJJQI2ASjydWksfYW8iziSz7piA6N7xiXME7I9A ==

Activation 1.0 data OEM-->
N/A

Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC1118 APIC 061207
FACP 061207 FACP1118
MCFG 061207 OEMMCFG
061207 OEMB1118 LASRYVITRAGE

A copy of Lenovo OEM of Windows 7 Ultimate has been installed on a computer with a card mother MSI previous to the introduction of Windows 7... Copies of Lenovo OEM windows are approved by Microsoft for use only with a new Lenovo computer.

The copy installed Windows 7 is a counterfeit. You must purchase a new copy of Windows or to revert to the original copy installed on the computer when it was bought new.

OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLK

You have Microsoft Office Enterprise 2007 is approved for use by large companies, which is not normally found on a computer at home. The permit holder must validate the license. Until it is validated, you will not be able to update to Microsoft Office. If the holder of the license is your employer, you should seek their help, otherwise the software must be removed from your computer.

Windows updates do not work

Similar Questions

Maybe you are looking for