Windows vista backup error 0x80070005

Similar Questions

• How to restore Windows Vista backup on Windows XP computer?

  I was about to lose my hard drive on a computer with Vista Home Premium. Stored on an external hard drive. Not able to find my Vista rescue cd, I so installed XP Professional I've had. Attached to transfer backup files, but will not transfer.

  Original title: Save transfer problemsproblems

  Hi Marty,

  Windows Vista backup files are in. Disc format hard virtual which is only supported in Vista. You would have to restore them on a computer that is running Windows Vista and then copy the contents of the Windows XP computer.

  See also: back up and restore: frequently asked questions

  How Windows Vista backup uses zip files to store backups (and how to extract the zip files)

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet

  Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet

  Hello

  This can help you:

  Download and run the Flash Player Uninstaller, as Flash can get damaged.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Windows Vista backup: How to restore a backup

  My HP laptop running Windows Vista Home Edition died yesterday. I did fortunately backup using Vista backup to my external storage device.

  I just got my Dell under Windows 7 Home Premium laptop. How can I transfer my backup files in Windows Vista on my device to external storage to my new laptop?

  original title: Windows Vista backup

  Hi BaylorPup,

  Follow the steps in this document to restore files from a backup.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• Cannot get permission to access some files restored from a windows vista backup

  Hello. I just installed windows 7 on a new hard drive. I bought the upgrade to windows 7 Home premium and I had to install vista on the new hard drive first then windows 7.

  I have all my files backed up on an external hard drive and I used windows vista backup and restore to do.

  I have now restored my files on my new hard drive using windows 7 backup and restore.

  I see all my files and folders, but the thumbnails are missing and when I try to actually open a file, a message informs you that I don't have permission to access.

  I tried to click with the right button on the files and changing the security, property, sharing and options, all to nothing does not.

  I tried a few ways to restore my files too, but nothing works.

  If I save a newly downloaded or created file (for example, a photo that I found on the internet) in the same folders, there is no problem and I can access, so the problem isn't that I don't have access to the records.

  Another weird thing is that I can access some of the restored files, but no more than them. I can't think what it is on those I can access that should make them different from those that I can't.

  So far it does not my simple PC! Can anyone help please?

  I should add that I am the ONLY user of this computer, and it is not on a network. Previously, it was the same when I am running windows vista. This is why I'm the only person who should be able to access the files.

  Same problem here after restoring a file backup of Windows Vista to a new installation of Windows 7. This solution worked for me: go to the command prompt, change the drive or a directory, you have problems with and type this:

  ICACLS * / reset/t

  Edit: You need to start the command prompt as an administrator to do. Find it in the start menu, then right click and choose 'run as administrator '. Then use the command as shown above.

• during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.

• error 0 x 81000005 on the Windows Vista backup - home

  Please help me. It is the 2nd request for the same problem. I can not get a backup on Windows Vista. Keep 0 x 81000005 error - get the message on the desk and say: low disk space. Checked the recovery drive D and available space is 0. Help me before I got a real big problem.

  Thanks in advance for your prompt response.

  David Baumgardner

  Please help me. It is the 2nd request for the same problem. I can not get a backup on Windows Vista. Keep 0 x 81000005 error - get the message on the desk and say: low disk space. Checked the recovery drive D and available space is 0. Help me before I got a real big problem.

  Thanks in advance for your prompt response.

  David Baumgardner

  You are unable to make the back because you've done your backup file in drive D: that is your recovery Partition. You are NOT supposed to do.
  Recovery partiton has a very small disk space, no time to fill up the partition.
  Read this...

  Your recovery partition D is implemented by the manufacturer of your computer in the event of serious problems in your system.
  You use it to restore your system.

  You're NOT supposed to touch it... not to add or remove anything from or to it.

  Have you been using the D drive for scheduled backups of file?
  If this is the case, you call the manufacturer of the computer, tell them the situation...

  1. ask for a set of recovery DVD to reinstall Vista, if you do not have a game made yourself.
  2. ask how to remove backup files or elements that are NOT supposed to be there.
  They created the recovery partition, they know how to take care of it.
  Let them teach how you to.
  ..................................................................................................................

  RE: d ' training is complete

  D: is the recovery Partition to your computer at the factory standards,
  and to make you recovery disks from!

  Contact * Dell * purchase DVD recovery and fixation of your recovery Partition.
  They know exactly which files have to be there and those who you
  delete!

  In the future, buy an external hard drive and back up to that.

  * Editing: Michael Murphy responded to a user with a Dell computer. **
  --
  Mick Murphy - Queensland - Australia
  Reference link:
  http://www.Vistax64.com/Vista-performance-maintenance/158580-d-drive-full.html

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• error messages from Windows vista backup company

  I just got a laptop with Vista Business replacement and no system disk.  I downloaded and installed all of the 200 + windows vista updates including Service pack 2.  Now I'm doing a system recovery on DVD disks before starting the arduous task of reinstalling all my programs and data files, but I keep receiving the error message 0 x 80780119 not enough disk space to create the volume shadow copy on the storage location... and storage 0x8004231F insufficient to create either storage copy shadow file or other shadow copy data.

  Following the advice I found on another forum of Vista, I resized memory Ghost by using this command, vssadmin Resize ShadowStorage / For = C: / On = C: / MaxSize = 30 GB, who apparently has apparently solved this problem for others, but does not work for me.

  I try next? Be explicit because I'm not very familiar with this flavor of operating system Windows.

  
  

  Hello

  You can make recovery disc to factory settings from recovery partition from the manufacturer to back to factory settings

  Ask them how

  ___________________________________________________________

  see if this information helps you to make a backup complete PC Vista, as you have Vista Business

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  ___________________________________________________________________

  and as you say that no disk not supplied with your laptop, read this;

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Vista backup error: cannot run the RPC. (0x800706BE)

  Hey there, I have a question about windows vista. I'm doing a backup of my system. In the end, I get an error saying: "cannot save settings to schedule automatic backup for the following reason: cannot run the CPP." (0x800706BE).

  However, I don't want to schedule an automatic backup. I want to make a single backup. I tried to change this in windows Task Scheduler, but I can't because the WindowsBackup folder is not listed. Probably because there is no backups on demand. But I can't schedule backups since I get an error at the end. So the WindowsBackup folder does not appear and I can't change the settings. Someone knows how to fix this?

  To be clear, I want to make one backup of my system.

  When I go to services.msc and scroll down to the remote procedure call and watch 'Status' it says 'Started' or 'Released' (not sure since I have a Dutch version of Vista).

  Also, windows backup is not calculating the number of necessary for the backup dvd.

  Thanks in advance.

  Bottom of GR

  Hi Fazil,

  Thanks for the help. But Vista gave me more problems, not just this one. A few days ago, I decided to upgrade to Windows 7. Problem solved.

  Thanks again.

  Bottom of GR

• Not to install Windows Vista SP2 error Code 80070005

  I tried to install Windows Vista SP2 32 bit and I have SP1. When it is done install says it failed and it gives me error Code 80070005. And I do not have enough disk space. Any suggestions?

  Hi, GregDaSpider,

  Try the resolutions listed here:

  0 x 80070005 access denied. You are not allowed to perform the requested operation.

  http://support.Microsoft.com/kb/816731

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.Microsoft.com/kb/968003

• Windows Vista backup

  When trying to perform a new backup of windows vista, it is partially completed, and then I get a "Backup Unsuceesful" and an error message 0 x 80070005 I ran several backups before that without any problem. Any suggestions as to how to fix it?

  Hello

  (a) you are exactly how trying to backup?

  (b) do you use the computer as an administrator?

  I suggest you try the following steps:

  Step 1: Disable the security software and check.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists,

  Step 2: Try to run a check disk for errors by following the method from the link below:

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Post back with the State.

• Windows Vista backup on the external drive stopped working

  I have a LaCie 750 GB hard drive external (total size 698 GB) who I've been saving my drive C and D to a Dell XPS 410 using Vista Home Premium software.  He contended until the end with a backup automated on-demand for once a week.  He performed the backup 30 times since 11/09/09, but sometimes did so sometimes (shorter range) other than the weekly on-demand.  When I compare the total size with the free space on the external drive and my drives C and D, the amount of used space is respectively 131 GB, 5,11 GB and GB 665,5.  I am not very computer savvy, but if the backup program backs up only what of new each time, why used on my external drive space is so superior to what is still on my C and D drive?  I assumed that the backup software would just copy the previous backup, each time that a new backup or write on the oldest backup, but apparently is not.  So now all I get are messages saying that the backup was not successful because a file was in use or something to that effect.  I'm doing something wrong or do I have to reformat the hard drive external when it is "full" to start the backup of my computer again?

  Hello
   
  Your assumption is correct. Cross check if a new backup is created and saved in the external hard drive. If a new backup is not too write the old backup, the use of the space will be very high.
   
  Two particularly useful automatic backup features are the ability to do a scheduled backup and the ability to save your files.
  We recommend that you cross check if backup settings are intact. To do this, try the following steps.
  1. open backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.
  2. click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  For more information on "back up and restore: frequently asked questions" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
   
  You get the error message, unplug the external drive and restart the computer. Connect the hard drive and check if you get the error message.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Windows Vista SP1 error: 0xc0190036 (kernel32.amx)

  I tried to install SP1 on Windows Vista Ultimate 32-bit, like, forever now.

  He receives through steps 1 and 2 with no problems, then restarts the computer and begins to display all the registry files, etc., and then it freezes on:

  !! 0xc0190036! 4125/96829 (kernel32.amx)

  I have the voltage to the computer, then it will automatically load the Startup Repair.  In general I just do a system restore and live with all other errors (browser crashes, program freezes and incompatabilities, etc.) who accompany him not not upgrade, but now I really want to get this resolved.

  I kernel32.amx in C:\Windows\System32\manifeststore and tried to replace, rename, or delete, but I get an error message saying that I need permission to do so (even if I am logged in as the only administrator on this model). It is not read-only. I can't find it in the processes running in the Task Manager.  I am not even sure, however, if I look at the right file (are there other files named kernel32.amx?).

  I restarted Windows Mode without failure, but it's the same thing.  When I tried to reinstall SP1 & got the same error, I launched the Startup Repair and chose to not not to do a system restore immediately.  It generated the report to Microsoft:

  Problem event name: Startup Repair V2
  Signature of the problem 01: Auto failover
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  Signature problem 03: 1
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature problem 08:3
  Signature of the problem 09: WrpRepair
  Signature of the 10:10 problem
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  I clicked on "View diagnostic and repair details" and he showed several tests that have been carried out; most were successful, but a few lines in this report seems relevant:

  Root cause found: a patch prevents the system to start
  Repair action: repair and checking the integrity of system files
  Result: failed. Error code = 0xa

  I went to the Advanced System Recovery Options, but apparently I'm not that advanced. I ran Windows memory diagnostic tool (which found no errors, but also does not generate a report), then re-run Startup Repair, which has generated a new report to be submitted to the slightly different Microsoft:

  Problem event name: Startup Repair V2
  Signature of the problem 01: Auto failover
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  Signature of the problem 03: 6
  Signature of the problem 04: 196611
  Signature of the problem 05: CorruptVolume
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature problem 08:3
  Signature of the problem 09: WrpRepair
  Signature of the 10:10 problem
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Finally I just did a system restore to the last restore point. It is here where I am now. Any ideas?  I'm looking in the right places?

  Hi Didigrn,

  You got the error message indicates that kernel32.amx is damaged and there is one possibility of other files system is corrupted as well. All what we need to do is to rename the DLLs corrupted, restart the computer and let start the computer normally to complete the installation. Follow these steps to rename the corrupted dll file.
  (1) Insert the windows vista dvd and boot from the dvd.
  (2) select repair your computer.
  3) click on command prompt.
  Type the following commands and press ENTER after each line
  C:
  CD windows
  CD system32
  Ren kernel32.amx kernel32.amx.old
  (4) output of command line.
  (5) restart the computer and boot up normally.

  If you GET the black screen with a similar error and another file (except kernel32.amx), take note of the dll file, repeat steps 1 to 5 and type the name of the file in step 3.

  Restart the computer. It may take a while and you will be asked to connect to the desktop computer.

  Check in system properties if SP1 is installed or not.

  I hope this works. If you still have problem please after return.

  Shalini
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.