Wireless router has been reset, now the printer does not print wireless, cannot use the CD to reinstall the

After our wireless router has been reset, our printer lost its ability to print wireless.  The error message indicates that the printer settings are not compatible with the settings of the wireless router. My CDROM drive is not working so I can just uninstall and reinstall it with the CD.  How can I change the printer settings to match the settings on my router?

Hi there adamkarin,

Thanks for your info!

This is the link that you need to help set up the printer on your wireless network.

Installation of the printer software for a network connection Wireless (via an Access Point)

Good luck

Tags: HP Printers

Similar Questions

  • How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

    How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

    Do you know how to access the Linksys configuration screen?  Click Administration.  You should be able to access the logs from here.

    What happens if they have an older linksys router?

    Click on the Windows "Start" button and select "All programs." Click on "Internet Explorer" to open a web browser.

    Type "192.168.1.1" in the address text box and press "enter." This IP address is the default value for a Linksys router. If you have reprogrammed the router to have a different IP address, enter your IP address instead.

    Click the log tab

    model # here

    http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

    192.168.1.1 is an IP address that is normally used by the routers broadbandfrom Linksys.

    If the router has an IP 192.168.1.1, you can connect by opening a Web browser and visiting

    http://192.168.1.1/

    This allows to connect you to the console of the router administrator and access its configuration screens.

    http://compnetworking.about.com/od/routers/g/192_168_1_1_def.htm

  • Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

    Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

    Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

    Hi, Rlayhee,

    Printer brand/model?

    Start > Control Panel

    Select the Printers folder

    Right-click on the printer icon, then select open

    Are there pending print jobs

    If Yes, click on file > cancel all Documents

    Close the print queue and the printer folder

    Try printing again

    Start > right click on computer

    Select manage

    Select Device Manager

    Click on the + sign next to the Ieee... compatible printer (if any)

    Right-click on the driver and select uninstall

    Click on the + next to imaging devices

    Right-click on the driver and select uninstall

    Click on the + sign next to printers

    Right-click on the driver and select uninstall

    Click on the + sign next to Bus USB controllers

    Right-click on the driver and select uninstall

    Close the Device Manager

    Restart the computer to Windows to reinstall the drivers

    Go to the manufacturer's website and search for driver updates

    Try printing again

  • I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

    original title: NTFS problem
    Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

    Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

    I am running windows 7 ultimate in any way to solve this problem?

    Hello

    This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
    To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
    After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
    1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

    2. click on run as administratorand then click continue.
    If you are prompted for an administrator password or for confirmation, type the password, or click allow.

    3. at a command prompt, type the following command and press ENTER:
    fsutil resource setautoreset true c:\
    Note
    these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

    4 restart the computer.

    I hope this helps.

  • When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

    When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

    Hello

    We have released an WINDOWS ONLY fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

    If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

    Kind regards

    Ashutosh

    On behalf of the Illustrator engineering team

  • "the preferences file is corrupt and has been reset to the default settings" cs4 Mac

    Greetings!

    whenever I run illustrator that I encounter a new error.

    "the preferences file is corrupt and has been reset to the default settings."

    "the corrupted file is saved as Adobe illustrator Prefs.err".

    This problem that manifests itself after I added a few other .ai and .ase files in my directory of nuances. I think not changed nothing else.

    don't know how to diagnose the problem. is there a mode debug or something? Maybe a file in question.

    one option would be to try to remove each added file swatch or folder individually, but it would be a very tedious process for me.

    I use cs4 on a Macbook pro running Snow Leopard - 10.6.2 and would appreciate your advice.

    Thank you

    s

    s,

    Whenever you close Illy, the current preferences (which may have been changed while you worked on files) are recorded, and every time that you start Illy, these preferences will be used.

    Usually, corruption of preference probably appears randomly, caused by the operating system, but if something in your files to change preferences to something that is not viable, you will get an error like this.

    You can press Cmd + Option + shift during startup, which will replace the current preferences with the default values, and no doubt you you get rid of the error message. It is probably not a cure, however.

    If the error is persistent, the cure would be to get rid of things that are implicated in the files you are editing.

  • The router has been reset and now does not work

    I had problems with my Internet so my husband connection reset everything and now the internet works but isn't the wireless router. We called the company we have internet with and they said its because we reset all default settings and need to change the settings that we had, but we do not know how to do. Can someone please help us, we have a router Linksys WRT160NV3. Thank you.

    Just go to 192.168.1.1 with your wired computer, username admin blank password and reconfigure your router from scratch.

  • My office has been reset to the factory settings. I am enrolled in my sync account, but my favorites that are on my laptop, did not came to the top. Now what?

    I was fortunately sync-ed a year betweem my computer laptop Mac iBook and desktop HP - a lot of bookmarks - I am a student. My office had a small problem and I got it clean and reset to the factory settings. I'm now creating upward. I installed Firefox and made Google my default search engine. Then I logged in sync - no problem (even email, password... I wrote it!) I clicked sync, but my favorites are not come to the top. I closed Firefox and re-opened, but still no bookmarks. I looked at the settings and everything is checked. I wouldn't change anything. What Miss me? Thank you.

    Both devices use new synchronization and more importantly on Firefox 30.

    If you you don't need the synchronization of the former, and even if you use the same address as used for synchronization of the old all should operate under the new synchronization.

    I think that the new synchronization drops devices that have not synchronized within the past 21 days.

    Former site of Firefox Sync: new Firefox Sync https://account.services.mozilla.com/ site: https://accounts.firefox.com

  • Service Pack 1 will not install after that the pc has been reset to the factory settings

    At my pc reset due to problems of crashing and freezing factory settings, when turned on after resetting received masses of updates Service Pack 1 has not been installed, but it shows in the story as being successful. He reappears in the form of waiting for update installation, but when the terms & Condtions accepted the installation takes a few seconds, history shows successful but it has not yet installed. So I can't install SP2 to update Internet Explorer 9

    Hello.

    Thanks for the reply. I found a previous question with a similar problem as mine, there was a solution that I followed and was able to install SP1. I should have done this before my question!
    I also installed SP2. Resetting to the factory settings was a last resort due to a problem I was experiencing, but after installation of SP2 my original problem reappears. The problem is now in terminal phase and looks like a new pc.
    In any case, once again thanks for your help, I know where to go with future questions I have.
    John
  • My rank of war gear 3 has been reset on the xbox live

    Yes, I a question.i play gears of war 3, and im a rank 20 yesterday I came home and turned on my xbox360 when I signed to and went to gears of war 3 got rank reset to level one, are the only thing I have my: campaign levels, my arms imulsion pack and my collectibles. is there a way can I fix?

    Hello

    Answers has no influence on the XBox or XBox Live If you need to contact them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Forums Support - and my XBox Live account (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Why microsoft used to support fsx insisting on a product code when all I have is the product key that has been authorized for bu activation does not match their input format

    trying to get a simple answer to my question, I asked the support of microsoft for the contact to ask someone who knows about flight simulator but I can't spend the screen requests I have enter product code - I walked into the box of the product id provided key interest which enabled but said stupid site simply enter the code in the indicated format and it does not match this format once again , I can't communicate with them-i suspect that it is a ploy because there is no available support and it's a time of great runaround.last they do not recognize my computer id code - this time, they have recognized my computer but then obscured code fsx - i don't believe that someone will read this-i has recently received a message to say that my thread on an unanswered question them earlier had been removed and I was wondering who decides that - always has to be someone in life at microsoft

    Hello

    Where have you bought Microsoft Flight Simulator X for?

    Follow the steps in this article.


    Solving the problems of activation for Microsoft games and mapping programs

    http://support.Microsoft.com/kb/960480

    Also see this article:

    How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
    http://support.Microsoft.com/kb/973457

    If the problem persists, Flight Simulator supports for assistance.
    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • "Security error: your session has been invalidated" https Web site does not load

    Hello, I have this problem, I can not access this bank https://hellobank.it/ Web site or any of its pages with Firefox. This is one I take a stake in the Bank and I've never been able to access, it's not like I was able to load before and now I get this message.
    Screenshot: the "session_invalidated" image does not exist. https://support.Mozilla.org/en-us/gallery/image/19269
    The site works fine with IE 11. I have FF 32.0.3 and tried the following where nothing works:

    clear cookies
    Clear cache
    Restart in safe mode
    remove the cert8.db

    I don't want to reset FF. Any ideas? Thank you very much for your support.

    The details of your system to list shows you which were used in previous versions of Firefox and preferences which are no longer supported in the current release Firefox.

    Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

    You can try the following steps in case of problems with web pages:

    You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Photosmart C7280: router has changed and now C7280 printer won't recognize my wireless network

    I had to update my router to a linksys modem/router to comcast gateway.  other devices at home recognize my router wireless except for the printer.  the only option that appears is my 'comments' option, not others.  I turned all the devices off tension, then on new, including printer, computer and modem/router.  Frustrated! Help please.

    Your gateway to Comcast's terrible for wireless connections, they all. Put this bridge in full bridge mode and reconnect your Linksys router.

  • After YOU download Firefox 4.0, I get a message 'the system does not support' and nothing happens. My old Firefox has been replaced by one that does not.

    Asked by Firefox to download Firefox 4.0 for OSX I did. It replaced my old Firefox which worked well. When I try to open it, I get a window "cannot be started" Firefox and nothing more happens. I've tried to redownload 3.616 Firefox, but to open it, I get the message 'Choose application' and I don't know which app to use.

    You can get an unofficial version of Firefox 4, which runs on Mac OS X 10.4 from http://www.floodgap.com/software/tenfourfox/

    Or you can re - download Firefox 3.6 since http://www.mozilla.com/en-US/firefox/all-older.html

  • Printer lost access to internet when the router has been changed

    My HP Photosmart Plus is connected wireless to my macbook air and has worked well for years.  Our company has a wired connection, enter into a linksys/cisco router and it gives access wireless via an SSID on my mac and your printer.

    A few months ago, the router has been changed and they did something for cable and wireless.  Im guessing they're on separate subnets or something because it is another problem is that I can no longer view the others on the network who are wired, even if I could before.

    In any case, ever since this time, I noticed that some smartphones and tablets had no internet connectivity.  They were connected to the wireless network that gave my internet connection perfect Mac, their signal is just as strong, but they had no internet connectivity.  So I figured that the DNS' have not been read right by these smartphones and tablets, I manually added the DNS' using my mac and now these phones and tablets work very well.

    I guess it's the same problem with my printer now because the only thing that doesn't work is eprint and web services.  I get a message saying that the printer could not reach the server, try again.  Ive restarted the printer and it doesn't matter.  I can see it has a properly assigned IP and I can print wireless for it, but there is no internet access.

    How 'to add' those DNS IPs to the printer?

    Hello quique123,

    Welcome to the Forums of HP's Support.  I understand you get a connection error message when you try to activate your printer Photosmart Plus web services.

    I've included a link to another post with measures, including screenshots, on how to set manual of the printer an IP address manually and DNS servers. As you go through the post, you will notice that it is recommended to use the Google public DNS servers when you set manual DNS servers.  Please do not worry that the screenshots are for a Photosmart 7510, the steps are the same for your Photosmart Plus printer.

Maybe you are looking for

  • Is there a real need to have a backup iTunes?

    In the past, I always saved my iTunes library, in which case my computer crashed, I loose all the music I've bought over the years. But now, since you can download all previously purchased song, album, film, etc., is there a real need to have everyth

  • lenses for APS - C format will work with a full frame?

    I look again for Canon 5 d IV, but can't afford to start out, but with maybe one goal, their EF 24 ~ 105. I have a few lenses for my other devices. the first three go with my EOS Elan, yes I kept a camera for 20 years... I was in the East, America As

  • The scan button does not work on Windows XP Media Center edition 2005

    Name of the printer: hp psc 1350 all-in-one Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button d

  • URGENT blackBerry Smartphones: phone does not start after update (21/05/2009)

    As indicated in the title, my phone does not after that I updated last night. He mentioned that he will not be able to make any calls or anything for the next 2 hours, but after the time of 2 hours, it seems to fail during startup. At first, I though

  • Install 10 g 2 and 11 GR 2

    HelloWe plan to install 10gR 2 (10.2.0.5) and gR 11, 2 (11.2.0.4) on an AIX server. I hope that we must follow the prerequisites for 11 GR 2, according to the Oracle installation document as of sets of files, kernel, etc. Do we need to follow the pre