Similar Questions

• Need help on the use of the PCI-6221 and c# to control three digital Port and an analog of entry

  I need to send the digital output at three ports and then read an analog input voltage using the analog card PCI-6221.

  I did a c# program to fight against it. I built four tasks altogether. Three tasks for three digital output ports and a single task for analog input.

  How can I reduce the time?

  Using my method, to 3.3ms in total. And it's slow.

  I can build one task for three ports?

  What is the best way to the control task to reduce the time of communication with the PC?

  Is that possible to save a lot of analog reading entry in the memory of the DAQ hardware and then read it all together from the computer in order to reduce time consumption?

  1 million thanks!

  Hello

  Hi Jin,

  To answer your questions, Yes, you are able to configure a task of digital output to use three output ports and PCI-6221 has a buffer of memory FIFO aboard 4095 samples.

  I would like to direct you to the example of NOR-DAQmx for c# files located in the following location on your computer

  C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DotNET2.0

   

  Here, you will find predefined examples in c# that should give you a good idea of how to go about architecting your code to achieve the results you need.

  There is also a useful help file which you will find by navigating to Start > all programs > National Instruments > NOR-DAQ > help of NOR-DAQmx .NET Framework 2.0

  I hope that this answer is useful.

  Best regards

  Steve H

• Control with Labview instead of MAX PCI-1422

  Hello Experts,

  I need your help in one of my problem. I have a camera of sensors unlimited that is SU - 640 1.7 RT - D and a card parallel NI PCI-1422. I can use and acquire data with power MAXI of the camera, but I want to exploit, use and acquire images from the camera by using LabView. Is it possible to export or using the camera with Labview instead to write fresh code in LabView?

  LabView offers it all support or bed automatically PCI-1422 or any possible solution that I get the code for the use of this device block diagram in LabView.

  Please let me know, answer.

  For any help or suggestion will be highly appreciated.

  Thanks in advance!

  Hi David,

  You can use the function IMAQ write file to record the images to the disc. Please see the link for an example below.

  IMAQ writing file 2 VI

  http://zone.NI.com/reference/en-XX/help/370281M-01/imaqvision/imaq_write_file_2/#IMAQWriteJPEGFile2

  IMAQdx enter and save individual files

  https://decibel.NI.com/content/docs/doc-19537

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• Strange problem with analog output PCI 6251 and BNC-2110

  I'm controlling current source of third parties using the connectors of analog output on my card PCI 6251 and BNC-2110.

  The current source needs an input signal of 0.1V. I tested it using a battery, the potentiometer and the voltmeter, and by manually adjusting the voltage of power current works - current output with control voltage scales according to the specifications and is relatively stable.

  The data acquisition card works too - when I connect a voltmeter to the AO0 AO1, the measured voltage corresponds to the target with great precision value.

  But when I connect the current source of third AO0 AO1 data acquisition card, the measured output voltage drops and fluctuates. This applies to both channels of the AO.

  I wonder what is the problem here. I suspect it could be a matter of the grounding - the current analog control of the source is an entry with two floating terminals differential. I tried to return the switches FS/GS on the BNC-2110, but that makes no difference.

  Anyone knows similar behavior? Does anyone have any suggestions?

  
  

• PCI-7334 and L298

  Hello!

  Hope someone will help me with this one. I am currently working on a project that uses the engine of pci-7334 controller. Unfortunately, I do not have any system of training with me. but I have a connection to UMI-7764 block and a full-bridge driver double L298. I have also some engines step by step with me, but do not have to NEITHER. My question is: is it possible for me to to connect with the L298 and for the stepper motors using the UMI-7764 interfaces pci-7334? If possible, could someone help me with the proper cable connections? Thanks for the reply!

  Kris

  BTW the datasheet of the willing L298 of an application featuring a motor controller not to make leave a L298 more a schematic L297. The latter will NOT and DIR signals (more a few others for the most part static signals) and will also controls the current of the stepper motor windings. In any case, this circuit allows for a full operation or half step only. If you need to use microstepping with a higher resolution (for smooth movement and/or precise positioning), you're probably better off using a ready-to-no engine to no.

• Need help on info for thinkpad x 31/PCI modem and PM device

  Guys, I searched in the intenert for awhile, but no luck... Can someone tell me what the power management device and PCi modem is?... And where can I find the driver for PCI modem for think pad x 31.

  I need information about the PM device and PCI modem and what is its role?

  Hello

  A power management driver allows the operating system more precise on how energy is used by the various components of a control computer.  Installation it can improve the battery life as well as characteristics related to food, such as the Hibernate and sleep.

  A modem driver allows the ThinkPad to use its modem built for various purposes (Internet access dial-up, Fax transmission, etc.).

  All the drivers for the ThinkPad X 31 can be found at http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT072373.

  Kind regards

  Aryeh Goretsky

• MBP and Hercules DJ Control Air with El Capitan

  My son has this Panel DJ Hercules, which he uses when children have a part here at home. He has used successfully in the past on the MBP with the Mavericks, Yosemite, and he wants to work again with his next birthday. I have not yet found anything ito compatibility or incompatibility with El Capitan.

  Before this specific MBP is updated to El Capitan, I would be grateful if anyone has had experience with the combination configured as such.

  Leo

  MBP 8 6.2 GB RAM 256GB SSD with OS X 10.10.5 and Hercules DJ Control AIR

  Hello Leopardus,

  Thank you for using communities of Apple Support.

  According to the pilot of the Hercules DJControl Air download page, they currently support the latest version of OS X, 10.11.

  https://support.Hercules.com/en/product/djcontrolair-en/

  If you have further questions about this product, then I suggest that get you in contact with their support team.

  https://support.Hercules.com/en/contact-en/?p=DJControl%20AIR

  Take care.

• Satellite X 200 - 15 K and problem remote control

  I installed windows 7 x 64 on my x 200-15 k and the remote control does not work.
  I installed a few irda drivers found on the download page of Toshiba X 200, but still nothing, and it does not show any device irda in device manager...

  Is - this remote controller only for windows Vista (originally on my computer when I bought)?

  Thank you
  Milos

  > I installed some drivers irda...
  Sorry, but you cannot use some drivers and later wonder if the remote control will not work correctly.
  I checked the Toshiba download page and drivers Win7 for Satellite X 200 PSPB9E are not available.

  So when you have appropriate Win7 drivers, we can discuss about the functionality of remote under Win7.
  All you can do now is to test it with the drivers for the 64 bit version of Vista and hope it will work...

• Satellite A300D and ExpressCard Remote control

  Hello guys,.

  I own a Satellite A300D-135, y at - it an available for this model remote control? I'm looking for a remote control that fits in ExpressCard location as some HP models have.
  I looked at several Dutch hardware well known, but I can't find a remote that fits the ExpressCard location.
  I give many presentations and therefore use my laptop a lot. I would like to have a remote control that fits in ExpressCard location because that saves space and a remote control of such a size is easy to "hide" in your hand.

  Kind regards
  Hunterseaker

  As much as I know Toshiba doesn t offers remote control for this model of laptop. The question is whether a third party product is available on the market.
  To be honest I have no interest in something like that, but I just want to recommend you to visit the web page of Logitech. They have so many products for PCs and laptops. Maybe they have a solution for the remote control that you can use with your laptop.

  If you can find some interesting product please post the link.

  Good luck!

• Portege 7020 error message: PXE - E01 PCI vendor and device ID do not match

  Hi all

  I get this error message (ID PXE - E01 PCI vendor and device do not match) when starting, when I use my portege 7020CT on a cd-docking station. The error message occurs only when I boot with the power adapter.
  I know what means the error message, and I tried to change the boot priority and the BIOS update. None of that helped him. I can't say when the error occurred since I used a LAN card wireless for a long time.
  The ethernet LAN for now, so im card dosnt work using an ethernet pccard.

  Toshiba has released a "patch" for this problem but only with the station of transhipment on the DVD, I also tried, but it didn't work either.

  What seems strange is why the problem only occurs when the power supply is turned on?
  When the message appears, the screen is locked and I can not pass.

  hope someone can help me.
  / Dreadeye

  Hello

  Well, you're right. This message is displayed if it of not possible to boot from LAN.
  In this case, it s advisable to change the boot priority.
  But it seems that you have already tried to change this option. It s very strange questions because it s occurs only if the power supply is turned on.
  I n t really have no idea, but I found this site:

  http://support.Intel.com/support/network/adapter/1000/sb/CS-010508.htm

  Try installing the latest Boot Agent. I put t know if it helps but you can try it.

  Good luck

  Good bye

• Satellite M40X driver PCI Device and NetworkController problem.

  Hello..

  I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
  Any suggestion on which driver files may resolve this problem.

  Thanks in advance
  Shine

  Hello

  As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.

  Good bye

• Yellow brand - PCI Device' and 'Network controller' on the Satellite A100-787

  There is a yellow question mark in Device Manager for a pilot called "PCI Device" and also for "Network controller" even if the network (LAN) connection is working well and all the other computer functions seem to work well.

  What are these devices?

  The second device appears to be a LAN or WLan card. You should check if one of these cards were not installed under network adapters.
  The PCI device can be a card reader. Check this box too.

  But I really don't understand why these yellow exclamation points appear in Device Manager. I assume that you have installed all the drivers available. Did you?
  Please check if some drivers were not installed.
  If so, then download and install!

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• PCI device and SM Bus, MISSING controller and impossible to INSTALL - HP Pavilion g4 1264ca

  I had recently done a clean install on my laptop and when I rebooted, it was missing the drivers for the PCI device and SM BUS controller. When I go to Device Manager and try to reinstall or search the hardware changes, my computer is unable to install. Also, I was missing my network Ethernet and wireless drivers, but I installed the appropriate via the HP website drivers. However, still miss me these two pilots. I tried to install on my laptop, but just AMD chipset, which creates more problems because once the program asks me to restart the computer it remains stuck to the Windows loading screen (rotation around the Windows logo colors). If someone could find the right drivers for me download or ways to diagnosis this problem, any help will be greatly appreciated.

  Laptop model: HP Pavilion g4 1264ca

  Hello:

  You should definitely the amd chipset drivers to install the smbus controller.

  Here's what I've done for you...

  I have zipped and attached just the driver files raw you must install manually only under attachments below smbus controller.  As you saw that the chipset driver file contains a lot of other things as well.

  Unzip the files in a folder.

  Go to Device Manager and click the controller smbus needing drivers.  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.   Then restart.

  The PCI device is the card reader that needs a driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&product=5186397&sw_lang=