With the help of a knot of property for multiple controls/indicators

Similar Questions

• With the help of registration of dynamic events for a Subvi

  Greetings to the forum LV,

  I'm having a problem with the inclusion of dynamic events in a Subvi and hope someone here can help you! Attached, is the culmination of many attempts to try to understand the inclusion of dynamic events. Basically what I'm trying to do with the screw joint is 1.) have a button that controls output PWM, 2). a speed selection menu that can enter 1 button said.) with an array of pwm values predefined; and finally, 3) to have some sort of event program which "connects" controls in 1). (and 2.) (IE, if I move the button to an exact value shown in the table, the speed selection must match this event). So far, I can say with certainty that the "speed selection" event card will not work because "New value" & "Old value" refer now to the refnum and not the selection of speed control (I intend to solve this problem after I solved this problem of the Subvi). However, the map of event engine speed PWM should work (when matches button among the values in the table, the selected speed will also report the "speed selection" control), which allowed me to reach my conclusion that the Subvi is not working.

  My reference to dynamic Subvi Event Registration: http://digital.ni.com/public.nsf/allkb/A882E27D1D7A949386256E0D0066B91A

  You need to make a different State for 'Timeout' in the Subvi and also avoid passing the value of timeout as -1.

  Find the file code.

• With the help of own certificate on SAA for SSLVPN

  Hello

  I searched the forum for a definitive answer to this question, but I'm afraid I can't find one, can someone help plase

  I have ASA a client to which I created SSLVPN Client and Clientless SSLVPN.

  The customer has of its own certificate which he wishes to use to stop this message "problem with certificate secure Web sites," boring.

  The problem is that his certificate has not been issued as a result of the SAA CSR

  Is it possible to do so and if so, how would you please.

  I told him that the ASA must generate a CSR that is then sent to Versign (for example) who then send a cert to add to the ASA.

  But he saw the link below...

  http://http :// www.cisco.com/en/US/docs/security/asa/asa80/release/notes/asarn80.html#wp242704

  I think it's Java and I'm not sure of that step 1. is referring to:

  Step 1. Export the certificate with the PKCS12 files (with a private key)?

  Any help would be greatly appreciated

  Regards Tony

  Yes, this link is exactly what you are after.

  Given that CSR is not generated from the ASA, you must export the certificate including the private keys for the ASA will have a copy of these private keys. The certificate you want to export to the ASA must be in PKCS12 format and you can convert a PFX format certificate (this typically includes private keys) PKCS12 using OpenSSL as described in the documentation.

  Hope that answers your question.

• I wonder if anyone is familiar with this type of problem with the help of a Windows Media Player for DVD videos.

  Hello!
  I came across a problem with my dvd on my laptop drive. The program that I use on my laptop is Media player from Windows. And the laptop will recognize the DVD and everything, but when it starts to play, it gives me this message from Windows Media Player: "Windows Media Player cannot play video DVDs. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings. »

  Now I always use the old Windows XP for my laptop, but I can't seem to understand how to adjust the color quality and lower my screen resolution. Does anyone have a little step by step process that I could follow to do this?

  Lyn24 wrote:
  > Hello!
  > I ran into a problem with my dvd on my laptop drive.
  > The program that I use on my laptop is Media player from Windows. And the
  > laptop will recognize the DVD and everything, but when it starts to play
  > gives me this message Windows Media Player: 'Windows Media Player '.
  > can't read DVD-video. You may need to adjust your Windows screen
  > settings. Open display settings in Control Panel and try again
  ring your screen resolution and color quality settings. »
  >
  > Now, I still use the old Windows XP for my laptop, but I can't
  > seem to figure out how to adjust the color quality and lower my screen
  > resolution. No matter which deals a little step by step I have
  > could follow to do this?

  The problem is that Windows XP does not play DVD movies in native mode. You can
  have a DVD player, but it can only read DATA DVD at this time. In the order
  install a DVD codec to read video DVD discs. First we will
  Install this program from Microsoft and run it, and if you have a DVD
  Codec, it will appear in the display window. Download this program from
  here:

  http://www.softwarepatch.com/Windows/windowsdvdmpeg.html

  If it shows that you don't have a codec DVD installed, then you can
  buy one on one of the links on this page:

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  --

  Roy Smith
  Windows XP Pro SP3

• With the help of Adobe Stock image/images for advertising dating Apps

  Hello

  
  

  Can I use images/footages/vectors/illustrations from Adobe Stock to advertise for meetings Apps? If I can show the model faces?

  Thank you!

  Hello

  Please see Stock Licensing & conditions FAQ: where can I find the terms and the license information for Adobe Stock? for the conditions of use.

  Hope that helps!

  Kind regards

  Sheena

• License question: with the help of two "Standard Edition" licenses for > 8 vCPU by host

  Hi, I've been reading place on it for a few hours and would like to get confirmation here.  I have

  -a physical host: dual processor, 8 cores per processor

  -multiple licenses VSphere 5.0 Standard edition

  -VCenter 5.0 Enterprise Edition

  I want to distribute the VM with 12 vCPU and I expect to consume two licenses Standard Edition - one for each CPU, for a total of 12 vCPU.  When I try to do using VCenter I get error "virtual machine has 12 virtual processors, but the host only supports 8.»  "The number of virtual processors can be limited by the OS selected for the guest virtual computer or licensing for the host."

  I think that it is a license restriction because on the same host, the VSphere evaluation has authorized the deployment of a 12 virtual machine using RHEL 6.3 vCPU.  I checked later vCPU on evaluation copy function and it was 32 channels for it proves that it is not a BONE or a physical problem.  I think I downloaded an evaluation of the 'norm' rather 'Enterprise', but I am not sure.

  I read compare VMware vSphere editions and the 'Standard' column has CPU line: "CPU 1" and line vCPU: '8 - way '.  This makes me think that, for each new license, I should have a CPU with up to 8 cores.  that is by consuming two licenses, I use 2 CPU and up to 16 cores.

  I also read the EULA VMware multi-core pricing and Licensing Policy , and he said:

  Software licenses with six (6) cores per processor

  It does not say "with hearts of six (6) software licenses by host '

  The following excerpt from the EULA is the only evidence that I could find to support the conclusion that for Standard Edition, the maximum number of vCPU for each host is 8 (regardless of the number of licenses consumed);
  Combines VMware licenses on a single host software. Licensing policy allows combining the even on software licenses uniprocessor.

  Someone can confirm the limitation and is there something obvious that I missed to compare VMware vSphere editions.  The difference between host and per processor is huge, I'm surprised that it is ambiguous.

  Thank you

  Diarmuid

  Looking at this picture, it is said that you need 1 VMware Standard license per physical processor that your host has.  Down the chart to the vCPU, who said that a VM can have at most 8 vCPUs (for Standard).  Isn't 8 vCPUs per license, which is 8 vCPUs total.

  The demo version is licensed Enterprise Plus and develops of vCPU 32 on a virtual machine.

• With the help of an index PDF to search multiple PDF files on the web

  Is it possible to access a pdf catalogue indexed on the web. Help Adobe seems to indicate that it is possible only if all PDF files and index are in the same folder, but it does not work. Do I need a third party search utility?

  PDF IFilter is used for this purpose.  Then once the OS has indexed your web site, you can set up a similar to the IIS snap-in web search research provided by OS.

• With the help of 1102 and 1308 cards for different input types

  If I use maps 1102 and 1308 to receive both voltage and current signals, remove the resistance of the 1308 on channels, I don't want tension?  I guess that is another way of asking, is it possible to always send the current signals "through" the 1308 directly to the 1102 so that I can use only one card of 1102 for my application?

  Hello Jim,

  Thanks for the clarification, I misunderstood the original investigation.  When you reference the Manual for the SCXI-1308 module, it can be read on page 2 you can measure the current and voltage.  In order to measure the voltage, you should remove the resistance of the current loop, and later, he identifies the resistance and their respective channels on the next page, 3.  That said, delete the resistance won't be a problem.

  Best,

• With the help of ASA as a tool for deployment of profile Anyconnect

  I have a requirement to use a router ASR as a head of network clients Anyconnect IKEv2.  I want to use the ASA firewall to allow users (multiple operating systems - Win/Mac/Linux) for ease of deployment, download their respective Anyconnect customers as well as the required profile to connect to the ASR.  Note that the ASA is used only for AC and AC downloads profile, he participates in any VPN termination.  Users will just point their browser to the ASA firewall web page and download the client from HQ and the profile, then they will launch the AC and connect to the router ASR.

  My question is, is it possible?

  Thank you!

  I guess it should work even if I haven't tried it personally.

  Note that above ' ASA shows a screen connection in the browser window, and if the user meets the logon and authentication. So you have an SSL connection without client on the ASA FRONT to take the step "downloads the client...". ».

  You should be able, from here, download the client and profile and have the host of profile configuration to point to the address of the router ASR.

• With the help of my acrobat from adobe on multiple computers

  I have acrobat from adobe pro X 1 on a laptop and I just want to check if I can download it on another. If yes how can I do this?

  You are allowed 2 installs for your use. The license (you just need to look at the EULA) indicates that they should not be used at the same time. The license must clarify things. Insofar as the installation, there are 2 activations allowed and after that, you will get an error unless you disable one of the previous facility.

• With the help of Photoshop elements 8.0 for mac

  All of a sudden when I try to drag a file into pieces it comes as a very tiny picture.  I don't see the usual items workspace.  I have to use display to the print format to display the file.  Solved this problem by reinstalling the program, but now it's back.  What should do?

  Try to remove preferences PSE: leave PSE, then relaunch it all by pressing cmd + shift + option. Keep the key down until you see a window asking if you want to delete the settings file. You do.

• With the help of time interleaved sampling (TIS) to get the highest sampling rate of data acquisition card

  I tried enabling to TIS using nodes of property for the appropriate channel and by disabling the TIS for strings, I don't want to use. When I do that, I get the following error:

  niScope read Cluster.vi:1internal software error has occurred in the extended software. Please contact the support of National Instruments.

  Name of the component: nihsdru
  File name: p:\Measurements\highSpeedDigitizers\hsd\driver\trunk\1.10\source\redirection\tHardware.cpp
  Line number: 1038

  State code:-223425

  Any ideas what to do?

  Thank you, but I managed to fix it with the help of a few colleagues.

• With the help of JavaScript condition in the dynamic action of JQuery selector

  Hi guys,.

  I have a Setup master detail on a page.

  The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

  I want than the region of text element to only appear if the value * not listed * is selected.

  I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

  However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

  I guess I need some sort of NVL in JavaScript condition?

  I use APEX v4.2.

  Any advice would be appreciated.

  Chris

  Cashy wrote:

  I have a Setup master detail on a page.

  The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

  I want than the region of text element to only appear if the value * not listed * is selected.

  I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

  However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

  I guess I need some sort of NVL in JavaScript condition?

  I use APEX v4.2.

  Simple solution is to hide the region containing the element of text by default, using the style = "" view: no ' in the property of the attributes of the area in the region. " It will be always hidden when the page initially, but its visibility will be controlled by the DA subsequently.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.