With Windows Vista, HP printer repeatedly re - moved after turning off the PC, then return and losing sessions.
I have Windows Vista, Dell Vostro A860, HP PSC 1410 all-in-one printer. The HP CD work well with Vista. The printer repeatedly re - installs itself, making it necessary to go into the settings to choose my preferences each time. I did download a fix from HP that has first requires that you uninstall the original software, and then download and apply the fix. However, the patch will not install unless you have a software for its difficulty. It is a cycle race. Any ideas?
Jeanette
Hello
1. don't you make changes on the computer before the show?
2 did you receive an error message?
Method 1:
You can unplug the printer and reconnect the printer and check the issue. You can also uninstall completely printing software and then try to restart the computer and check.
See the link for help.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Method 2:
After restarting the computer, you can download and install the drivers and check.
You can check the link to download the drivers.
Software downloads & pilot - printers all in one HP PSC 1410v
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=458978
Also check out the link:
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Method 3:
After the installation of the printer, you can try to print a test page and check.
Print a test page
http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page
Tags: Windows
Similar Questions
-
Original title: Windows updates fail to configure.
I wonder to install Windows updates. I do and I am told they have installed. When I have to restart my computer, I get a message that the updates have not been configured correctly. The system then returns. Next time I turn on the computer I get a message saying that updates have not been successful. This has happened for months. I think that my computer is very slow because of it. I also think that my computer is a little short on memory. It is an Inspiron 530 with 1 GB memory
Hello
I suggest you try the steps from the link below and check if it helps.
Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358
I hope this information is useful.
-
Photosmart C7200 puts himself after power off the power. I get an error message and the lights flash. To clear, I have to disconnect.
I get various error messages-
'B8000080, B858BD82, B03Fcc84' I tried all suggestions from HP and nothing elimates the problem web page. In my view, that it is a common problem with the HP printer. I want to live with the problem until that matrices of the printer. I am very disappointed in the way that HP does not support to fix this and future purchases that I turn not to have bought HP products.
-
original title: URGENT
How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.
Hello
for starters, the info you received a DVD of windows 7 repair vista usage are BAD
you need a DVD vists or a vista Startup Repair disk repair vista
and you can NOT do a repair installation of booting from a DVD in vista
Repair facilities are on within an operating system
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
If necessary
Data recovery
1. remove the hard drive and it slave in another computer
2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this
3. try Knoppix
http://www.Knopper.NET/Knoppix/index-en.html
BUT this method depends on your hardware in the computer that failed
-
My another Windows Vista machine has been slain on "if it please do not turn off or unplug your machine. Installation of update 1 of 17 "for 4 hours. I need to close because it's my phone and I travel NOW.
How can I stop the update and close?
http://support.Microsoft.com/kb/555375>
It helps those answering questions if you provide:
What version of windows (32-bit or 64-bit) and service pack level.
you use what browser (exact version).
What application or antivirus security suite is installed and your current subscription?
What third-party firewall
What anti-malware software can be installed.· What are the updates that you try to install on the system?
If the update has failed then try these steps and check if that helps. I suggest you to let us know the number of KB updates.
Step 1
Uninstall the updates failed program and features, follow these steps
a. open Control Panel from the start menu
b. Select programs and features
c. click View installed upgrading
d. uninstall the update failed
Step 2:
Reset the component of windows update and then try to install updates, check if the problem is resolved.
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058>
Step 3:
Install the stand-alone package containing the updates. You can download the stand-alone version of the below link with number:http://www.microsoft.com/downloads/en/default.aspx> and check if the problem is resolved.
For more information click on the link below.
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
-
Running Windows Vista SP2 and IE 9. When I run Mr. Fix - It on Windows Update, is shows the components of Windows Update must be corrected. I am hosting the program solve the problem. If I re - run the same test again once, he does the same. I have the other problem of breakdown on race fix it on any other criteria. When I run the fix - it on Internet Performance and security, it shows my data execution Protection is disabled and my Smart Screen Filter is off. Both are activated. If I let the program Fix - It problems, even if they are correct, Fix - it continues to fail. Any ideas?
Hello
I suggest you according to the question in this forum and check if that helps:
http://social.Microsoft.com/forums/en/fixitcenter/threads
It will be useful.
-
Is X 63 Lexmark with Window Vista compatable printer
I tried to plug my old printer of 8 year to my computer, but it keeps rejecting!
Hello
Lexmark wrote the drivers for their products non-microsoft
You should check the Web site of lexmark for solutions to these problems
It doesn't seem to be compatible with vista
Check with lexmark for a workaround or upgrade your printer
-
My laptop HP Povilion dv5 (Notebook) get hot after awhile I connect and sceer becomes black breast t0 10 to 20 minutes. I want to know the reason and the solution.
Hello
overheating can cause sudden stops of your machine.
with a laptop computer, make sure that the vents are regularly cleaned of dust, etc.
Also make sure that the laptop is in a well ventilated area, not used on the bedspreads, blankets, etc.
If above does not solve you may need to provide computer technology to clean inside and make sure that the fan/s work properly
-
How to turn off the stars, rss buttons and replace refresh them with the button 'go '?
I used to be able to fix the latter with userchrome.css, but apparently it doesn't work anymore.
#go-button {display: none !important;} #star-button {display: none !important;} #feed-button {display: none !important;}
can someone tell me what they have been changed to because these #buttons do not work
Oops. I was editing a cell firefoxes .css intsead of my native installed but still can't get "go button to work. After a bit of searching on Google I found a solution
#urlbar-go-button {visibility: visible !important;} #urlbar-reload-button {display: none !important;} #star-button {display: none !important;} #feed-button {display: none !important;}
even though I wish I could put the go button last instead of the first (arrow go, history dropdown, refresh)
but I see what you mean with being separated from the Interior of the obtained, stop and refresh
Edit: oh I see button GB - url and url-update now. Thank you
-
iCloud photo library
These two articles should help answer your question and provide you with information on how iCloud library works with your iOS device:
iCloud Photo library FAQ - Apple Support
iCloud Photo Library help - Apple Support
See you soon,.
GB
-
I bought new cartridges yesterday and installed them. This is the message I got after that
Contact the manufacturer of the printer. Any material support is the manufacturer of the equipment.
-
Jet all-in - One desktop: HP 4630 ringtone in the printer. How do I turn off the sound
When I get a phone call, it seems to be a ringtone into the printer rings when someone calls me. How quiet this ring?
Welcome to the Community Forum of HP.
The phone ringing?
The fax settings are on Chapter 6, Page 52 of the User Guide
Close OFF sounds
Reference:
E-all-in-one printer, HP Officejet 4630 range
Click on the thumbs-up Kudos to say thank you!
And... Click on accept as Solution when my answer provides a fix or a workaround!
I am happy to provide assistance on behalf of HP. I do not work for HP.
-
I asked Microsoft and they have no information about it. I tried two different computer cleaners in hopes that would help. I also deleted all the files that I think are unnecessary. I don't know what then. Help.
Hello1. have you done any change in software on the computer lately?Step 1.
Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
See the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Step 2.
You need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.I hope this helps. -
Is there a version of Java compatible with Windows Vista 32B?
Is there a version of Java that is compatible with Windows Vista 32 program b? I had to wipe my son's computer and now am reloading programs and downloaded a Java program that is not compatible. I don't know what version of Java is compatible or even if there is a. Can someone tell me if it is and where I could find it? Thank you!
Go to http://www.java.com and it will detect the correct version to download. However, it is recommended that Java is not installed unless you have a known for this requirement. Currently, it has the highest level of security and is used as a vehicle to install malicious software.
You can also use this site to install all the free common applications in a single operation.
-
I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?
original title: error code 80070005
Help us help you: start by reading this post 'sticky '...
What information to post in the Windows Update forum
http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
Maybe you are looking for
-
How can I unsubscribe from a monthly automatic renewal for the Washington Post?
I don't want to get the Washington Post more. It automatically renews each month and I pay on my Apple account. How can I stop it?
-
My iphone screen just broked. How to get a free display Exchange if repairs and Service coverage is still Active? I found a few shops bestbuys and apple around me. Thank you very much! Jerry
-
How can I get my iTunes library is displayed on my new Macbook Pro?
I have a new macbook pro. my old macbook crashed. I try to access my iTunes library to my new computer and am not succeed. I have "authorized" this computer, but it does not appear on my list "manage devices" in iTunes. Any suggestions?
-
Satellite Pro A100 - recovery mode sleep with keyboard or media remote
Hi guys I have devoted my Satellite Pro A100 to be a media center which is located under the TV and can play media network and DVD etc..It is using Vista. I want to set up, is that the lid is closed 24/7 365 days and when I want to use I just press "
-
code error 80070057 the parameter is incorrect
Hello I have a server with Windows server 2003. I have a problem when I try to add a new user role in a portal Application COM + system applications displays the following message: An error caused while processing the last operation: error 80070057 t