WLC with different admins

Similar Questions

• Adding a secondary WLC with different software version

  Hi all

  Soon I will deploy a secondary WLC (primary, active) with the version of the 7.4.121.0 software

  The environment have a standalone WLC (secondary, hot standby) with the version of the 7.0.240.0 software

  I have read the deployment guide "Configuring High Availability" and have this quote: ' we recommend that you do not combine two controllers on controller different versions of software.» If they are matched, then the controller with address of management of lower redundancy becomes the active controller and the other controller goes into maintenance mode. »

  I know that the upgrade to secondary WLC can be provide by WLC primary only.

  So, how can I do this?

  1 - downgrade the WLC secondary to the 7.0.240.0 and the controllers of the pair of two or

  2 - controllers to couple the two and to match the two controllers (perhaps with questions)?

  And it s necessary in both controllers have the same version of software images (boot primary and secondary boot)?

  Thanks for any response.

  It is necessary to have the same version of code... because if ap moves one wlc to another, they will have to be upgraded and or downgrade, which can take 5 minutes or more.  This will affect your end users.  The WLC should also be the same model... well its recommended.  But if your current wlc does support the latest code, then your new wlc will have to be downgraded.

  Here is a table of compatibility to keep handy:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/Compa...

• Duplication active with different name of DB

  Hello
  
  I am trying to duplicate a primary database in another server db with different name. On the current database of target duplicate for the eve of the database nofilenamecheck of shooting, I am facing ORA-01103: name "ORADB" in the control of the database file is not "11GDB" error. I tried a few other commands of duplication in surfing the internet, but nothing has worked.
  
  DB primary
  
  name of the data base: ORADB
  
  OS: OracleLinux 5
  
  version: 11.2.0.1.0
  
  Watch DB
  
  name: 11GDB
  
  OS: OracleLinux 5
  
  version: 11.2.0.1.0
  
  Both the db runs in ASM diskgroup with different name. The watch below the content of the Standby database pfile.
  
  11GDB.__db_cache_size = 314572800
  11GDB.__java_pool_size = 4194304
  11GDB.__large_pool_size = 4194304
  11GDB.__oracle_base='/U01/app/oracle'#ORACLE_BASE the value of the environment
  11GDB.__pga_aggregate_target = 318767104
  11GDB.__sga_target = 478150656
  11GDB.__shared_io_pool_size = 0
  11GDB.__shared_pool_size = 146800640
  11GDB.__streams_pool_size = 0
  *.audit_file_dest='/U01/app/Oracle/admin/11GDB/adump '
  * .audit_trail = "db".
  * full = '11.2.0.0.0'
  *.control_files='+STDBY/11gdb/controlfile/current.260.788911153'
  * .db_block_size = 8192
  * .db_create_file_dest = "+ STDBY.
  * .db_domain = "
  * .db_file_name_convert = '+ DATA', '+ STDBY.
  * .db_name = "11GDB".
  * .db_unique_name = "11GDB".
  *.diagnostic_dest='/U01/app/Oracle '
  *. Dispatchers ='(Protocol=TCP) (SERVICE = 11GDBXDB)"
  *. FAL_CLIENT = "11GDB."
  *. FAL_SERVER = "ORADB".
  * .log_archive_config = 'dg_config = (oradb, 11gdb)'
  * .log_archive_dest_1 = "LOCATION = + STDBY valid_for = (all_logfiles, all_roles) db_unique_name = 11GDB'"
  * .log_archive_dest_2 = "service = ORADB LGWR async valid_for = (online_logfiles, primary_role) db_unique_name = ORADB'"
  * .log_archive_dest_STATE_1 = 'ENABLE '.
  * .log_archive_dest_state_2 = 'ENABLE '.
  * .log_file_name_convert = '+ DATA', '+ STDBY.
  * .memory_target = 796917760
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .standby_file_management = "AUTO".
  * .undo_tablespace = "UNDOTBS1.
  
  Please, someone tell me where it won't.
  
  Kind regards
  007

  The mentioned error the primary SID is ORADB

  Whereas, in the pfile file displayed by you, there name

  * .db_name = "11GDB".

  db_unique_name may be different but db_name should be the same.

  Please make the changes and go ahead and share the output.

• Restore the virtual hard drive backup on a different node with different IP and host name.

  Hi guys,.
  I want to do the following.
  
  My reliable backup strategy is the virtual hard drive backup. The database is installed on a virtual particulay machine (node). Now, I do not take the backup of the DBF files or control files or files from archive.
  I rely on the virtual hard disk backup. It takes the entire Virtual Machine backup. Now, I wanted to restore this virtual hard drive backup to a different node with different IP and host name.
  But before I start the database, there are some things I need to do.
  As change address IP address and the hostname registered with the database installed and its services.
  
  Please guide me through the steps on how to perform the activity.
  
  Concerning
  Lam...
  SOA admin.

  I think that the whole operating system will be restored in a new virtual machine... I have it... The changes will have to be done in the file listener.ora (hostname or IPADDRESS and also PORT NO in case you want another port as the existing one). Once you have made the changes that you have to bounce the listener, I mean stop and start the listener... I don't think that any other changes are needed... Make sure that the same need for entries (from the listener) to be included in the TNSNAMES file. ORA file both client-side... The tns service is used to connect to the remote database server (from the demand side or whatever source you used to connect to the database server)... I just think that the change to do... Hope its clear... Please try...

  HTH
  Kind regards

  IMRAN KHAN

• Yosemite: Why 'Shares and Permissions' displays 2 all users with different privileges?

  Some folders and files inside my user folder sharing and permissions like this:

  

  I can remove the user from "search...". "(a user who has been deleted and no longer exists) but I don't know what to do on both"all"users with different permissions. I can't delete the one with custom privileges. Help!

  Solved by Leroy Douglas. See What are these custom privileges?

• Photos with different apple id: s

  Any way to sort photos taken with various apple id: s in photos for mac? I have three different iPhones that has been moved from parents to children. Is there anyway to sort images with different apple id: s? I heard that there is way to sort different (smart folder) with the model of phone, but this is not enough cause phones were used earlier by the parents. And I want to use only a single library of pictures, so the different IDs: s for mac is not the solution. It would be nice to get this functionality.

  You can use smart albums with a combination of constraints: the model of the iPhone and the date rank when the iPhone has been used by a person in particular. If the iPhone has been in use you make in the years 2012 and 2013 creates a smart album that will check for the ipHone and the date range.  Then announces a keyword "Photo by Me" of all the photos in this album. Do the same for the other ranges of iPhones and date and assign the photographer as a key word.

  If you keep marking new imports with a keyword of photographer then you can create smart albums for every photographer.

• I used to be able to get on a site, but two days ago I can't either. I spoke with the Admin of the site and the site looks at me as non-legit, he said.

  I used to frequent a site RPing until two days earlier Sunday, January 26, 2014. After talking with the admin of the Site, I was told that the site is no longer recognized me as a person "legitimate." I passed through all the normal steps, updated, uninstall and reinstall Firefox, delete cookies and history, removed the proxy for the connection (and all other proxy options) and even by restarting the computer. I tried to access the site on other browsers, IE and Chrome and it works great! I still have other friends who can continue to use the site on Firefox! I don't know how to solve the problem, and I hate Chrome/IE with a passion, so I pray there is a way to solve this problem and I would like to use Firefox again for the site. Regarding the error I get whenever I try to access the site, it reads. "The requested URL '(Site address)' could not be found or is not available. Please check the spelling or try again later. »

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• iCloud full - found two backups with different dates

  My 20g iCloud storage is full.  When I went to manage my data, there were 2 backups of my iPhone with different dates.  Can I remove 1 of them (the older one I guess) without affecting my current phone?  I guess that's when I upgraded my iPhone 4 to 5

  Of,.

  Yes, as long as you can identify with certainty the backup latest.

  

• The ipad pro supports multiple monitors with different content on each screen?

  I want to replace my laptop with an ipad pro.  Currently I drive three screens with my laptop, all with different content (VGA, HDMI, laptop screen) with no additional adapters.  The Ipad pro has a video card that will allow me to run multiple monitors (3 including the pro) with different content on each monitor?

  Given that the pro iPad running iOS and iOS do not supports multiple monitors, I would say no. I may be wrong, so feel free to correct me.

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• How to structure the DMA buffer for SMU 6341 DAQ card for analog output with different frequencies on each channel

  I use the outgoing/incoming analog DDK with the DAQ 6341 SMU map.

  The examples, for example aoex5, show a single timer (method outTimerHelper::loadUI), but the example shows the DMA loaded with same size of vector data.

  There is a comment in the outTimerHelper:call rogramUpdateCount, which implies that memory sizes different pad per channel can be used.

  (the comment is: switching between the sizes of the various buffers is not used)

  Nobody knows what should be the format the DMA buffer for data from multiple channels with different frequencies?

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  Hello Kenstern,

  Data are always intertwined since each card has only a single timing for each subsystem engine.

  To AO, you must specify the number of samples that will be released to the AO. You also specify the number of channels. Because he didn't is that a single engine timing for AO, each AO will be channel will be updated at the same time to update clock tick. Data will be interlaced exactly as shown in the example because each channel AO needs output at each tick of the clock to update. The data itself can change depending on the frequency you want to copy.

  kenstern wrote:

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  In your example, you must come with an update rate that works for the two waveforms (sine waves of 1 and 1.5 KHz). To get a good representation of a sine wave, you need to update more than 10 x faster than your fastest frequency... I would recommend x 100 if possible.

  Update frequency: 150 KHz

  Channels: 2

  Then create you stamps that include complete cycles of each wave you want to produce based on the frequency of update. These buffers must also be of the same size.

  Buffer 1: Contains data for the sine wave of 1 KHz, 300 points 2 cycles of sine wave

  Buffer 2: Contains data for the sine wave of 1.5 KHz, 300 points, 3 cycles of sine wave

  You can Interleave them as before. When the data are performed through the ADC, they are out different sine waves, even if the AO channels are updated at the same speed.

• layout with different resolutions

  Hello and Hello!

  Once more I need some advice:

  I have a program that is running on different machines with different resolutions.

  Is it possible to avoid, that the provision is paning all around?

  Best regards

  Hilby

  Hi Hilby,

  No.... This is currently a limitation of the layout, where we try to adapt to each screen, but objects and the page layout is not appropriate in different proportions with a different number of pixels.

  The aspect ratio is the most important, followed by the total of the resolution of the screen.

  Additional information about elongation are below.

  In summary, DASYLab is unable to completely adapt the layout "Screen" for the size of each screen and resolution. If you want to have a fixed provision which is not completely in some monitors, then consider using a size fixed, such as A4 or A3.

  If you do something on a large monitor, 1600 x 1200, for example, and move it to a screen wide monitor, 1600 x 900.

  Of my friends on Wikipedia

  With computer screens, wider than 4:3 aspect ratios are also known as widescreen. Computer monitors widescreen previously generally 16:10 aspect ratio, now they are moving in 16:9.

  Until the about 2003, most computer monitors had a 4:3 aspect ratio and some had 5:4. Between 2003 and 2006, monitors with 16:9 and especially 16:10 aspect ratios (8:5) became commonly available

• Alignment of thread with different screen resolutions

  I noticed that block diagram wire positions/alignments can change, sometimes significantly, by switching to screens with different resolutions.  There is a ton of information on the maintenance of the proportions on the front panel as the solution of problems, but I can't find how to mitigate the problem with the wires on the block diagram.  Does anyone know how to best handle this?

  Thank you!

  crossrulz wrote:

  I never noticed the block schema change due to screen resolutions.  I saw this kinds of problems during the change of system fonts.  For example, switching from XP to Win7 meant go to police Aero, which is a font more great than XP used to its default system font.

  That's what I noticed as well.

  The solution is to set the blockdiagram fonts in the LabVIEW.ini be specific font rather than a system font.

  Something like

  BDFont = "Tahoma" 13

• Several analog inputs with different configuration differential/CSR

  Hello

  Can anyone tell how to measure two analog inputs with different configurations using a USB-6009?
  I am aware of the syntax for create virtual channels for the channels DAQmx create virtual so I created two strings using Dev3 / ai0:1 but I would like the first string of the CSR and the second to be differential.
  So far I have found no way to specify the configuration of the separate channels.

  Any ideas much appreciated!

  Jack

  JackT wrote:

  I prefer to use the 'low' level vi is therefore always curious to know if there is a way to set the configuration using the their.

  It should be like this: