Words for audio files do not burn to CD

Similar Questions

• T400 adding 2nd HD for audio files, any PERSON using Ultrabay Adapter II successfully?

  I use my T400 to record the audio in my project studio. I would add a second HD for audio files and the content of the programmes.

  After some searching of web and because of my current installation, would like to know what additional HD system would work well. I'm happy with my system, but see some stuttering and dropping out of school. I run a MOTU light Ultra in the 4 pin F / w.

  1. I can use the Ultrabay, with SATA adapt II to drop in Seagate Momentus 7200, SATA300, 320GB, which hopefully will be compatible. I saw a post that this works like SATA300.   2 I could use a glyph Portagig 7200 RPM 320 GB, 800 F/W or USB as an external hard drive. I need Garland who at the MOTU F/W400 to connect, I'd be from ports. I don't know if USB would be as good on transfers.  NOTE: My Card/Bus Express slot is in use for other attachments.

  Is someone using a second HD with any one of these methods successfully?  I would go on the road II Ultrabay adapter, to be able to use my other attachments when editing.  CD/w could come back when I need to burn a finished product.

  No matter who sees all conflicts, I, as a beginner, do not see?

  Thank you

  Thanks to all who responded.  I was out of town, without my password.

  Bill wrote:

  I have several IIs adapter Ultrabay and they work very well with a variety of SATA 2.5 "drives for my purposes

  *********

  Dr. Khan wrote:

  Yes. It will work with no problems atall.

  I personally use one. So far so good...

  **********

  I started to pick up after a previous thread by Dr. Khan, stating that its SATA 300 disc had worked. So thanks to both for the

  conformation.

  Kawika says:

  But, seriously, I recently returned to the field / natural records, particularly indigenous and endangered forest birds. I am quite amazed at what I can get out of this PCM recorder (Oly LS-10 w / depth of 24-bit 96 kHz, AudioTechnica and Sennheiser microphones, Sony flat). Workstation is with WavePad for a function I use, noise reduction and then Raven for sonogram analysis and noculars. I looking for something that compress the "echo" the file and did not find something suitable. The Oly came with Cubase LE 4 of Steinberg, and I get a little, um, stunned, when I look at that too long. Newbing all over again, so maybe you have suggestions? The long-awaited T400 replaces my current T41 which, well, gets a little upset at times.

  *******

  Yes, I the Oly LS-10, a very good hand unit.  I also received the Cubase LE 4, but for me, its got a steep learning curve.

  Much more easy DAW is all on a single page of Mackie Tracktion 2 or 3. Very easy to learn and your final product will be just as

  professional such as Cubase. If you learn Tracktion, you will have an easier time with the more complex Cubase.

  http://www.Mackie.com/products/tracktion3/ check it out.

  ***********

  Zilla wrote:

  So, to be on the safe side with the T400 Ultrabay, you could buy the new disk of 320 GB at 7200 RPM Lenovo announced in January.

  I didn't know that Lenovo made a great and fast.  An option, if it is near the level of Seagate.

• audio files do not play sound after the restoration of the links

  I recently moved to a project from one disk to another.

  When I opened it the project folder I had to recreate a link to all the media which seemed to have a lot of success. However the audio files do not seem to play any sound. When I tell one of the audio files in the finder window, it take me for an alias file. When I try to open this file, it indicates that the original file cannot be found.

  I tried to remove the entire library of files sound and re-import them back in. But still, it does not solve this ridiculous issue.

  Any suggestions?

  Thank you

  Karl

  Are music protected audio files?

  Russ

• Audio files do not play in my windows media player?

  Why my audio files do not play through Windows media player?

  Hello

  Have you recently installed another player?

  Right-click on taskbar - Task Manager - processes and see if WMPlayer.exe is already hidden.
  If the end then on her process.

  --------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  Determine if 32 or 64 bits.

  Start - type in the search box-> Winver find upstairs and double click on - check version

  After that the foregoing, add codec - get these 32 bit if:

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ============================================
  ============================================

  If 64-bit:

  Read this 1st and go that route, or use the one below.

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit Vista - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR those listed above that I prefer.

  K - Lite Codec Pack 5.0.5 & K-Lite Codec Pack 5.0.5 update
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack (64-bit) 2.6.0
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  --------------------------------------------------------------

  Have you recently installed another player?

  Reset your associations:

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  -------------------------------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the error message "a license is required to play the selected song or video. However, a license for this file is not found, has expired or has been altered"while trying to play a downloaded song

  Original title: Media Player

  Yesterday, I downloaded a song.  Now my Windows Media Player will not play anything.

  I get the same room whenever I try to start each song in my library:

  Media usage rights acquisition

  wmasf.MusicNet.com

  A license is required to play the selected song or video.  However, a license for this file is not found, has expired or has been altered.  To obtain a license for this content, please visit the website or open the software application in which the file was uploaded originally.  You need to connect or buy the song or the video.

  I ran several diagnostic, and remedial programs, but nothing worked to get media player to work (without getting this popup Media Player and stop).

  It seems to be a kind of malware that has damaged something in my windows media player.  When I put "wmasf.musicnet.com" in the address line on explore, I get only the same message as the pop-up.

  Anyone know how I can fix the media player and get rid of this problem?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooters in Windows Media Player and check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Open the troubleshooter in the Windows Media Player library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Try to reset the management of digital rights (DRM) and check if it helps.

  Follow the steps to reset the DRM:

  1. first of all, check that the hidden files and folders option is enabled.
  To do this, follow these steps:

  a. start Windows Explorer. To do this, click Start, type userinit.exe in the Search box and press ENTER.

  b. click on organize, and then click folder and Search Options.

  c. click on the view tab.

  d. click Advanced settings.

  e. under hidden files and folders, click Show files and folders, clear the Hide protected operating system files (recommended) box and then click OK.

  2. Locate the DRM folder on the computer.
  In general, the DRM folder is located in the following location.
  Note In these paths, drive represents the drive on which Windows is installed.
  Windows 7 or Windows Vista.

  a. Windows 7 or Windows Vista versions x 86-based
  drive: \ProgramData\Microsoft\Windows\DRM

  b. Windows 7 or Windows Vista versions x 64-based
  drive: \ProgramData\Microsoft\Windows\DRM

  3 Rename the file DRM DRMbackup.

  a. right click on the DRM folder and then click Rename.

  b. type DRMbackup, and then press ENTER.

  c. close Windows Explorer.

  Warning: You must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.

  For more information, see the following Microsoft article.

  The Player Windows Media DRM: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions

  Hope the information is useful.

• Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Whenever I click on a word or document it opens excel excel but it gives an error message: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  I can open the document that after selecting the file only in excel or word blank document by clicking on the windows logo & choose the file and click on open.

  I need immediate assistance. I tried windows service pack 2 updates, but nothing works. Can anyone help?

  Please repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.office.misc&lang=en&cr=US where the Word and Excel experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After I download and visualize the 'air - SDK - description.xml', the version is 21?

  Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After that I have download and view the 'air - SDK - description.xml',

  < name > AIR 21.0.0 < / name >

  < version > 21.0.0 < / version >

  Hello

  We have fixed this problem. Please download a second time to get 22 AIR beta build.

  Thank you

  Krati

  Adobe AIR Team

• Hi, what is the red/green arrows for audio that will not play on my calendar?

  Hi, what is the red/green arrows for audio that will not play on my calendar?

  This icon means that the media is offline. There should be a little 'offline' next to it.

  This ARTICLE goes into detail on what can cause media offline and give some advice on fixing things.

  Here's a look at the project Panel, showing that the icon and the "Offline."

  

  Good luck

  Hunt

• burn mp3 to CD audio files, can not put all the files in the 1 disc,

  I am trying to burn mp3 to CD audio, if I choose audio CD, some how when I drag the file in the burn list, it's auto show 1 file in a single disc, how can I put all files on 1 disc? If I choose the data disk, so I put all the files in the 1 disc

  In fact, when you copy MP3 files as such, it is written as such, in digital format. In other words, the size of the file is important here. Depending on the size of CD, 650 MB to 800 MB, you can add files only up to the storage capacity of the CD.

  In the case of the audio CD, the data is written in analog format (as a cassette tape or gramophone record). In other words, in the present case, the duration of the file audio issues. The capacity varies between approximately 74 minutes to 90 minutes, respectively.
  Because each file is 50 + minutes, as stated in your post, it is normal to restrict a file per CD, such as the capacity is 74 minutes to 90 minutes. If you use the MP3/WMA format instead, you can put all the files in a single CD.
  Answer if your problem is not solved.

• Audio files do not play

  I recently bought bike G 3rd Gen which has Lollipop 5.1.1 installed. Files adudio played smoothly at that time. After a month I received the update for 6.0 Marshmallow, then I updated for it. After that, I noticed my audio files most is not read by most readers of the music. I don't know what the problem is, but you have any help. I have 2 GB of RAM

  What kind of file is it? Have you tried safe mode? Have you tried a reset? Are these music files? They are available to the public for the third test? What music players have tested?

• Audio file does not appear in the timeline

  I can play the video file (and the sound), the audio file integrated, in the form of source very well but when I drop the video file in the timeline panel does not display the audio file. This could be the cause? I can hear it first, why did he transfer the video to the timeline.

  Very probably guilty: Source patch not enabled for an audio track.

  

• Audio file will not play on the server

  Hello

  I incorporated an audio file on a page. it plays perfectly well in any browser I use to preview, but when I put the page on my server, the playback controls not displayed, only the logo of quicktime appears. url: http://www.doctorastronomy.NET/amateurastro/SunTube3.html

  Thank you

  Dave

  DWFAQ.info wrote:

  You don't need Quicktime to play the mp3, but you need Flash player to play flash.

  QuickTime, iTunes, RealPlayer, etc...  You can read some MP3s if you have a drive installed and the file type is associated with the default player and that the browser has the plugin necessary to launch the player.  It's a lot of 'ifs. '

  Flash is easy because almost everyone has already.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• Two consecutive sound icons for Audio files

  HI -.
  
  I've implemented a flow line which has two icons of consecutive sounds before displaying an icon of interaction with a question.
  
  The first sound icon is for the audio issue.
  The second sound icon is for audio for all of the answer choices.
  
  Originally, I had the file set up to play full audio of the issue and to play the audio response BEFORE the interaction icon would then become active (which requires participants to fully hear the question AND choices before responding). I did it using «WAIT FOR PREVIOUS SOUND "in the timing tab for the sound icons.»
  
  Now my client wants the interaction in question is immediately active while the game of questions and answers.
  
  Is it possible to have TWO separate room sound icons in order "simultaneously"? Or do I need to combine the TWO audio files into a single icon and sound competing to define? I was hoping to avoid combining the two audio files into an icon of her unique for two reasons:
  1. the files in question and response are delivered separated... so you have to put them together.
  2. I was hoping to put the answer files that are reused several times in a library file so that they can be reused again and again to maintain the low file size... and if I have to combine the question with responses each time, it will increase the size of the file.
  
  Or can I somehow use a command in a CALC ico to play an audio file located elsewhere?
  
  Any help would be appreciated.
  Thank you!
  
  
  

  The combination would be better for what is facilitated. A free audio tool like
  Audacity would be perfect. I understand the issue of management of library/property only.

  Authorware has only one audio channel the audio icon, you noted.
  The classic/native way to get around this is to have another audio
  Play through a sprite or an ActiveX control. The old method was to use
  the film with the film icon ' audio only ' QT, but the icon of film without
  more long handles QT...

  So much easier can be to create a Flash movie with the other audio file.
  Save down, as close to Flash 6 you can and use the Flash Sprite to
  play the other audio file.

  Otherwise, I think that Gary has a Xtra or .u32 on its site;
  http://www.mods.com.au
  who can manage playback of audio files - buddyWav, is it?
  HTH
  Erik

  Scott - TNC wrote:

  > Is it possible to have TWO separate room sound icons in order "simultaneously"?
  > Or do I need to combine the TWO audio files into a single icon and sound value
  > who to simultaneous?

  --
  Erik Lord
  http://www.capemedia.NET
  Adobe Community Expert - e-Learning
  http://www.Adobe.com/communities/experts/
  ------------------------------------------------------------------------
  http://www.awaretips.net - Authorware tips!

• Open the bridge for Photoshop files are not listed in the MRU PS

  I've just upgraded to the latest version of Photoshop and Bridge. When I open a file of the bridge in Photoshop and then make changes to the PS and save, the file is not listed in the file/open recent... list or in the new interface that lists recent files. All files opened directly from PS work correctly but the bridge open files are not listed.

  Please reset the Photoshop preferences once and then see if it helps.

  How to reset preferences: preference file works, names, places | Photoshop CC 2014

• How can I Solo the left/right speaker for audio files?

  Hello

  I would like to know if it is possible to have an audio file, no matter what kind, stereo, mono, .mp3, .wav, etc. and make only out right, or right speaker left speaker. I use Adobe Premiere Pro Cs6.

  Thank you!!

  Use the Pan or balance effect on the clip.