Work unmodified

Similar Questions

• Modeling of MOSFET and language SPICE

  Hello

  I´d would like to know which of the modeling MOSFT levels are supported in Multisim and if the language of the Spice used is the standard.

  Thank you

  Good day!

  Hi Morara,

  You can find a list of levels/models currently supported in the Multisim User Guide. You want to reference chapter 7 Multisim SPICE > Analog Devices > MOSFET.

  Unfortunately, there is no standard SPICE language. Implementation of Multisim is based on XSPICE with a few additions, however, Multisim takes care of compatibility modes that allows you to use say Multisim a model SPICE was writing for a particular Simulator and use the syntax for this Simulator. We can use models designed for other simulators. As a general rule, if it's an analog model, it is likely to work unmodified in Multisim. If it's a digital model XSPICE wrote, it is likely to work unmodified in Multisim.

• I've recently upgraded to El Capitan of Lion.  My iPhoto library is also transformed into Photos.  In iPhoto, I used Photoshop as my editor in Chief of "standard / default.  I can't do that to work with Photos, all I can't get is the photo editor.

  I've recently updated to Lion at El Capitan and my library of more than 40 000 iPhoto was also improved (?) photo.  He ran all night.  I used Photoshop as my editor of "standard/default" in iPhoto, but now I can't seem to appear in the photo is the photo editor, which is not enough for my purposes.  I have found a workaround that requires images to export], edited and then re-imported to the Photos, but I lose all the original images.  Can I have Photoshop become my default editor for Photos, as if it was in iPhoto?

  3rd party editing application must be updated to work with the new structure of the El Capitan and Photos before they will be able to work seamlessly with Photos.

  In the meantime we must export the original file in the office using the menu option file ➙ export Original unmodified for 1 Photo and edit the file there.

  

  

• Example SynchAI-AO does not work

  Hello!

  I use a USB 6621 and I tried to run the code example, ANSIC C SynchAI-AO delivered with the equipment.

  First of all, I got the following error message:

  DAQmx error: terminal Source routing is not found on the device

  Make sure that the name of the terminal is valid for the specified device. Refer to

  Measurement & Automation Explorer of valid names of terminals.

  Property: DAQmx_DigEdge_StartTrig_Src

  Property: DAQmx_DigEdge_StartTrig_Edge

  Source device: Dev1

  Terminal: AI/aiStartTrigger

  Task name: _unnamedTask<1>

  Status code :-89120

  Then I changed the following line (the rest of the code remains unmodified):

  DAQmxErrChk (GetTerminalNameWithDevPrefix(AItaskHandle,"ai/aiStartTrigger",trigName));

  TO:

  DAQmxErrChk (GetTerminalNameWithDevPrefix(AItaskHandle,"ai/StartTrigger",trigName));

  Now I get a different error message:

  DAQmx error: measurements: unbuffered clocked by the hardware operations don't are not supported for this device, a Type of channel.

  Set the buffer size that is greater than 0, do not the sample clock synchronization, configure or

  set timing sample on request.

  Task name: _unnamedTask<1>

  State code:-201025

  I'm a bit confused.

  Running this example is not possible with my hardware (if so, you can get information about the example codes work with my hardware, and which are not)?

  Or is there a bug in the code for the example?

  Thanks in advance for your answers!

  Kind regards

  Christian

  Hi Christian,

  Thanks for posting about the problems you found with this example program. Change ' HERE/aiStartTrigger' to "AI/StartTrigger" is correct. The problem that causes error-201025 is a missing line of code (which goes directly below the call to GenSineWave()):

  DAQmxErrChk (DAQmxWriteAnalogF64 (AOtaskHandle, 1000, FALSE, 10.0, DAQmx_Val_GroupByChannel, AOdata, NULL, NULL));

  Once you add this line, it should work (tested with a USB-6229; I guess that you have a USB-6221?). These problems have been reported to R & D such as CAR #181942.

  Brad

• What happens if my external drive "working files" breaks down?

  I use two external drives to save and back up my files.  The files organized, edited the reader of 'work'.  If the drive working breaks down, how can I restore it from the player of "backup" that contains just the original, unmodified, the files placed in folders by date of importation?  I realize that catalogue contains all the changes, but how to return to the Organization?  Anyone using a Raid 1 configuration for two disks mirrored?

  Maybe I don't make myself clear. How to take the 'back-up' disc, containing original photos not published, ordered by date of import and convert the disc format 'work' catalogue in the LR4 will recognize?

  It's great that you think about it now, instead of this disaster.  Play well!

  The "second copy" option in the dialog box import is ideal for temporary backup, while the pictures in your main backup system, but it is a nightmare to restore from.  There are options to rearrange disaster, but it is better to avoid.

  Rather than RAID1, I would suggest looking at backup synchronization software or a file - I love Vice Versa on Windows or Chronosync on Mac - to keep a copy in the mirror of the work unit.  If you use RAID1 and photo gets deleted or damaged, it is immediately deleted/damaged on the second disk RAID, while the file backup/synchronization software would go less often, giving you a chance to recover it.  Many also offer one option 'archive' for deleted photos, moving them to another folder.

• Im getting an iPhone SE of the United Kingdom, I would like to know if it works in Albania

  I want to know if this works with the carrier that I choose

  It depends, if your carrier allows you to call or text outside of your region. Your iPhone will work in any country

• Why video does not work in safari

  The video on all Web sites IN safari has stopped working. No idea why?

  Do you get any error messages? If this is not the case, see if by double clicking the home button and drag to the top safari help. -AJ

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India

  Hello Sir,

  I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the difference what I unbox my 6plus in indai, I unbox my 7plus in qatar and I put the sim card of sri lanka first and tried to India sim then and facetime disappear from the home screen. at the point where I insert my card sim of qatar is worrking. Please I need help. If I buy another piece of 7plus and bring it in sri lanka or India my facetime work? or what? I'm totally confused plese answer me as fast as you can

  FaceTime is forbidden by the law in Saudi Arabia and the UNITED Arab Emirates and is removed from iPhones sold in other countries of the Middle East, if they are used outside the country where they were originally sold. If you plan to use an iPhone outside the Middle East, then don't buy it in the Middle East. The one you bought there FaceTime was illegally imported from another region and sold it.

• My App Store did not work... When I try to update or install apps it does not work. Can you please fix this?

  Can you please fix the problem? Appstore cannot update or install apps... App Store not worked yesterday.

  We cannot solve a problem for you, but we can make suggestions of troubleshooting...

  Have you tried restarting your iPhone yet?

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• my iPhoto has stopped working

  My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

  What version of OS X (or, if all goes well, Mac OS) are you running?

  What version of iPhoto do you run?

  iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

• QuickBook 2015 does not work on OS Sierra

  Hello! My quick book 2015 will not work on the newly installed MacOS Sierra. "You cannot use this version of Quickbooks 2015.app with this version of Mac OS" is someone has a solution to this problem

  Seems what intuit has changed their Quickbooks for a right to use a month for their application

  According to their web site. or a close to $300. cost for a licence of the only machine (more?)

  Some research suggests that QuickBooks version 17 exist, maybe it's the subscription model

  as their single version machine says it's version 16. For Intuit Quickbooks information, rely on them:

  • For Mac - accounting software - Intuit QuickBooks:

  https://QuickBooks.Intuit.com/Mac/

  The subscription models, suggest that they offer a "free trial" then a monthly fee.

  

  I have not read past the first page. -Not certain what options may exist, to Intuit.

  And I'm not a user of QuickBooks...

  Edited to add: see quickbooks support:

  Is Quickbooks for Mac going to Sierra? Is there an another altern...

  https://community.Intuit.com/.../1394425-is- QuickBooks- for-mac-goes-for -sierra- is-t

  Update 2015 is here: http://http-download.intuit.com/http.intuit/Downloads/2015/US_R8/QuickBooksProMa c2015.dmg

  • IntuitBiscotti
  • 7 days ago

  Good luck and good hike!