WRT160N V3 games problems! need help!

Similar Questions

• Autoruns.exe serious problem, need help urgent please

  Hi, someone there is familiar with this software from sysinternals? Have accidentally disabled key drivers in my laptop with this software and cannot run again. Anyone know how to reverse the errors using this application? Posted full problem in the recovery and repair forum. Have had no response from sys internals forum and really need help. Thank you, Jay

  Try to reactivate the drivers tab drivers doesn't work, so did system restore. Thanks to all who responded, the problem is solved

• Audio problem (NEED HELP)

  Hello

  I met a very weird audio problem yesterday, I'll try to explain as best as possible what the problem is.

  For some reason, I can hear audio in games and videos I have in my computer very well. But the problem is that I don't hear nothing else coming from my pc, I do not mean the being emptied recycling bin, I don't hear any sound of internet explore or firefox, even when it starts I can't hear anything in my headset.

  But when I test with my audio software (Realtek HD audio manager) or when I use of playback devices I can hear JUST fine.

  I think that this problem started with livestream, I used it yesterday and it has caused a few errors that required me to restart my computer.

  So please if anyone of you has a solution for me I would like to hear it, I quite to reinstall my audio drivers fiddling around with Device Manager.

  Thank you for your time, I hope to hear from you soon.

  If you need further details please do not hesitate to ask.

  What happens when you test these sounds in the control panel - sounds - sounds tab?

  When you re-install your Sound Drivers have you checked to make sure that you have installed has shown
  upward into the device as Manager they often rollback so you need to install - reboot - check - repeat until the
  vouchers are installed

  Click right speaker in the near right lower clock - reading devices - right click in white/white
  area - check Show hidden devices and display devices disabled. To the lower right of all stakeholders
  Properties - check the settings on all tabs.

  If no joy try System Restore to save before this happened

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Video jerky on 3D games. Need help!

  Windows Vista Home Premium 64-bit
  6gig RAM
  256 MB NVIDIA GeForce 9100 graphics card
  9550 Quad core AMD processor

  I have a problem that I can't fix on my own.  When I run any 3D video game, such as World of Warcraft, Neverwinter Nights 2 and dungeons and Dragons Online, I can play very well for about the first 5 minutes and the video would become quite agitated that it makes the game unplayable.  This system did not always have this problem, I was able to play these games without problem until about 3 months ago.  I have formatted and reloaded windows, ran numerous virus/spyware/performance scans, lowered the graphics settings to the minimum, updated all drivers and updates windows without success.  My wife has the same exact system on the same network and can play games without any problem.  I had ideas and I was wondering if anyone here has noticed.  Thanks in advance.
  Mag

  Hi Papamag,

  Check the version of DirectX installed on your computer. Here is the link that will help you check the version of Direct X. below DirectX: frequently asked question: http://windows.microsoft.com/en-us/windows-vista/DirectX-frequently-asked-questions

   

  Install the latest version of DirectX from the following link: http://www.microsoft.com/games/en-US/aboutGFW/pages/directx.aspx

  Try the steps listed in the link below:

  DirectDraw or Direct3D option is unavailable: http://support.microsoft.com/kb/191660

   

  Improve the performance of your computer game: http://support.microsoft.com/kb/815069

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer game problems! Help

  I bought a computer game for my laptop and it says it is only compatible up to Windows XP, but I know that in Vista, you are supposed to be able to run a program as if it is running an earlier version. Then I tried it 100 times and I also used the compatibility program, and it won't work at all! I get an error 1607, and he also says data error cyclic usage or something close to that. In any case, I really want to play my game. Help?

  Install the software to a new folder that you created. Once thru, R.click on it, properties, configured to run

  in XP compatibility. If the option does not exist, it would be not compatible vista but does not

  not just seems, like most xp and vista software. In addition, you may need to open the folder, or open the

  Properties of the game cd, locate the .exe or installation file, R.click on it, properties, compatibility

  tab, run in xp mode.

• When I try to open and turn on windows Defender I manually get 0X800106ba code have not been able to solve this problem, need help!

  do not have mcafee just use windows security, with all the protections on and running except windows Defender, it's my error 0X800106ba issue code

  The game, 16 December 2010 15:19:47 + 0000, redbluemoon wrote:
   
  > do not have mcafee
   
   
  Good. It is a very bad choice, in my opinion.
   
   
  > Just use windows security.
   
   
  It has no product called Windows Security. Do you mean Microsoft
  Security Essentials?
   
   
  > with all the protections on and running except windows Defender, it's my error 0X800106ba issue code
   
   
  If you mean that Microsoft Security Essentials, it turns off Windows
  Defender, because it does essentially the same thing itself and you
  don't need both. It is not a problem, and you should not try to fix it.
   

  Ken Blake (MS-MVP)

• Three problems needing help

  Hello out there, I have Windows 7 home and office on an old Dell that is six years old.

  It seems that if I have three problems maybe not connected.

  Translation

  I installed the update simplified Chinese but do not see it as an option in the taskbar. It STILL shows only English for the US or Australia in option. The elanguage Chinese update was ranked managed in my updates BTW.

  Cursor

  When I type the cursor moves around the screen, then type will whenever the cursor is located. It's really annoying and means that if I type something that I have to stop and move it where I've finished typing otherwise I move around. Annoying bloody.

  Micro

  I have Skype and every time I do an Audio check the microphone does not work. For some reason any driver for the microphone is not listed as an option, although the speakers work now. Maybe I do need to update the drivers for the Dell printer, but I don't know how and I don't get live chat with Microsoft.

  I have run a check of the hardware (which has not yet finished), but I am aware that everything works fine. Here are software problems.

  Any help is appreciated

  When I type the cursor moves around the screen, then type will whenever the cursor is located. It's really annoying and means that if I type something that I have to stop and move it where I've finished typing otherwise I move around. Annoying bloody.

  This is usually caused by the Palm spraying it on the touchpad. Disable the touchpad, the problem will be solved.

• First Pro Debug event problem [NEED HELP]

  Hello guys and guys, Hello staff!

  For a few hours, I have a huge problem from first pro cc 2014!

  

  Since the beginning, that I'm not able to load an existing one or start a new project, which is very annoying, because I'm a youtuber and I need to edit videos to download. Now, I have to pause until the issue is resolved.

  Thank you very much for your help!

  Best regards

  Kevin

  It seems that you do not have this file:

  Workaround Remove the folder effect presets and Custom Items.prfpset of Documents\Adobe\Premiere Pro\8.0\Profile-CreativeCloud (or user name) - folder.

• volume iPhone6s problems - need help!

  Sometimes when I use Siri as "Hey Siri" when I'm not able to reach for the phone, or driving, the volume is so low I can hardly hear it. This happens in my car via bluetooth or in my house. My volume controls are all the way up, so it isn't that. It is an intermittent problem. Is there a known issue with the iPhone of 6 s?  I have a friend with the same phone and the same problem.

  The steps detailed here to try to see if they help you:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

• ProBook G2 450: PROBLEM NEED HELP

  NOTE: Game: vacuum/g (186 GB) drive
  
  Recently, I installed a GAME: / G DRIVE... (186 GB)
  When I uninstalled this game my drive was not get full vacuum... his show (185 186 GB), but it takes (186 186 GB) and there's nothing else that to always see the 185 then what happens?
  
  Help, please...
  
  [Sorry for the no grammatical language... This isn't my mother tongue...]

  imran450 wrote:
  NOTE: Game: vacuum/g (186 GB) drive
  
  Recently, I installed a GAME: / G DRIVE... (186 GB)
  When I uninstalled this game my drive was not get full vacuum... his show (185 186 GB), but it takes (186 186 GB) and there's nothing else that to always see the 185 then what happens?
  
  Help, please...
  
  [Sorry for the no grammatical language... This isn't my mother tongue...]

  Hello

  Thanks for posting in the Forum from HP Support.

  If I understand correctly, you have installed a software/game on disk/partition G.

  G: has 186 until the game has been installed.

  Game is now uninstalled and when you open the disk/partition G:\ Windows shows there is nothing there. However, at the same time you see free 185/186 (a.k.a 1 GB is absent)?

  Am I right my assumptions?

  If so, please format this disk/partition. This erases everything.

  Right-click on the drive, choose the Format and follow the on-screen instructions. Select 'Quick format' on/check and format NTFS or FAT32 file system

  

• Serious manual Windows Update problem, need help

  Hello when you run the microsoft update in the start menu, I am now getting a totally different message, then I have before I've never had this problem before when I'm trying to update I get the error message "403 - Forbidden: access denied."
  You are not authorized to view this directory or page using the credentials you supplied. »

  I have automatic updates turned off that I prefer to manually update.

  This has happened only since I installed the microsoft security essentials, but I also got nod32 on my computer as I have now deleted these two and nothing will do, the problem persits, I decided just to install security essentials miccrosoft and I can't update as well as the exact message I get is as follows

  
  "" microsoft security essentials was not able to verify the defination of virus and spyware updates
  error code: 0 x 80004002

  "" error description: the microsoft security essentials was unable to download definition updates, because your computer uses an older version of the windows update client or becvause windows could not start the service that transfers data.

  I use 32 bit microsoft xp professional, sp3 installed with all the updates until about 3 weeks ago

  Any help would be appreciated!

  Thank you

  Please stay with your original thread on this subject: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/89a95d94-0257-4250-a6bc-cc1bf08802b2

  There are many more things that simply installing MSE.

  Thank you.

• 5 D Mark III video problem - need help!

  Hello

  Been using my 5 d Mark III for video for about a month now. I noticed a problem occurring in the middle of some plans where the color seems to pass. The problem is so weak that it will take full screen, full HD and a high level of concentration to detect. In my opinion, the most obvious presence is 28 seconds where the valley below suddenly takes a different color. Here is a video of my question: http://www.youtube.com/watch?v=Xw9IHYkUEqQ

  I performed these parameters:

  Manual focus

  Opening, ISO: Manually set

  Shutter speed: 1/50

  1920 x 1080 EVERYTHING I have 24 p

  Photo Style: faithful

  Custom white balance

  Auto Lighting Optimizer: OFF

  Highlight priority: OFF

  Speed High ISO NR: OFF

  I tried to see if they were detectable on the LCD on the camera, but to the naked eye, they are not. The original. Show them the MOV files that were transferred from the camera.

  Maybe that Chromatic Aberration or the peripheral illumination Correction? I did not disable these, and they are the only automatic settings I can think that would change Mid-shot.

  In my view, what ISO was set at 100 for these plans.

  Any ideas what could be causing this? Any suggestions would be much appreciated!

  Thank you

  Max

  I tested it on multiple devices, and it seems that there is a problem with my primary monitor. I will definitely test it next time I have a problem on multiple devices. Thanks for all the help!

• I have windows live photo gallery error 0 x 80004005 problem. need help anyone?

  can anyone help to problem, keep getting error code.  Windows live photo gallery error 0 x 80004005. I remove the program and download it again and have same prolbem

  Windows Live Photo Gallery is a database that can
  corrupted. (it is not affected by the uninstall /)
  relocation of WLPG)

  If you rename the file... it will force the photo gallery to create a
  new database file the next time, it is launched and the Gallery
  will be as it was the first time it was launched.

  I'm not positive that this will solve the problem that you are
  dealing with but if you want to test, the file name
  is... Pictures.PD6.

  Just rename it to OLDPictures.pd6. This can cause you to
  lose tags and metadata that are not rewritten on
  the photo files.

  The path to the file is:

  Windows\Users\%username%\AppData\Local\Microsoft\
  Windows Live Photo Gallery\Pictures.pd6

  Pictures.PD6 is a file... the following article explains
  How to show hidden files:

  Windows 7 - show hidden files
  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  If you decide to try it... Let us know if it's an improvement.

• HP Compaq Presario CQ61-355SQ - wireless driver problem - need help

  Hello

  First of all, I would like to thank all the people posting here some very interesting information on installing the drivers under Win XP. You do a great job!

  I followed the steps described in the guide and I arrived to install most of them (chipset intel, nvidia graphics, realtek network card)

  The only problem I have now is with the WiFi card driver intel. From here: http://h30434.www3.hp.com/t5/Operating-systems-and-software/General-XP-Downgrade-Guide-for-HP-Laptop... I tried this:

  Intel Wireless, (Note: MS Windows Installer 3.1or later, must be installed), here

  and he did not sense that accrued installers ok but nothing happened, in Device Manager, no change has been made. After that I tried the method with 'Have disk', I chose in the list and tried some of the drivers, but in Device Manager it says that the "device cannot start".

  What could try then?

  Help, please

  Is that what you have installed MS Windows Installer 3.1?

  Indeed you have intel wireless, try sp45837, here

• x 86 update (KB951647) problems need help

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86

  computronico,
  Post the information here: what to post in the Windows Update forum

  If you are still having this problem then take a look at this thread because it addresses the issue of update of .net.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.