WRT1900AC media server name change?

Similar Questions

• Server name change

  Hey guys,.

  During the reconstruction of my esx server and before to find where is the DNS info, I had to add the VIC by the host IP... is there an easy way to rename this box within the CIE?

  Thanks

  If only add you the host in the cluster by using the IP address instead of the FULL domain name, simple disconnect and remove the host.  Then 'add host' as a FULL domain name.

• Why can't I change my outgoing server name?

  Verizon sent me notice that I have to change my outgoing server name. When I enter the settings of Thunderbird, there are about 3 choices in the drop-down list for the outgoing server none of them are what I need and Thunderbird will not allow me to enter a new name in this field.

  Maybe a picture will help you get to the correct place.

• IIS and sql server 2000/2005 if problems ip address and host name changed

  Windows Server 2003, IIS 6.0 + SQL SERVER 2000/2005

  Is there a problem if ip address and host name of the server is changed?

  for example

  IIS 6.0 may still work properly?

  SQL Server 2000/2005 can still start correctly?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Bad with emailing... How to change a "server name"?

  I have a problem, emailing and sending photos... This happens: the host ' * address email is removed from the privacy *' is not found. Please check that you have entered the server name correctly.    his old buddies email etc... How do I change/fix this? Help! Sometimes I can send things but, it happened again just... thx!

  Possible problem with the server on your side or your friend (e), first contact your e-mail service provider and discuss with them. They might be a restriction by sending content to the destination email.

  Finally, it comes to forum public and please do NOT post an e-mail here.

• I enter the wrong server name, how can I change it?

  I downloaded the program to send videos by e-mail, I entered the wrong server name how can I change it?

  I downloaded the program to send videos by e-mail, I entered the wrong server name how can I change it?

  ====================================
  I assume you mean Windows Live Mail?

  Try to open Windows Live Mail and go...
  Tools / accounts / select (highlight) the account in question / properties button / tab server...

• Computer scientists moved us from one server to another. The change of server name has left me with an orphan sync partnership.

  Our it staff moved us from one server to another.  Although I did a sync with all my spotted "available offline" files before the move, the change of server name left me with an orphan sync partnership.  Is anyway to disconnect this partnership?  I have not been able to find a way.  Thank you.

  original title: orphans of sync partnership

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Vista Networking forums. Please ask your question in forum Windows Vista Networking TechNet.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• RA media server became administrator after changing my standard user account

  What is the password?

  RA media server became administrator after changing my standard user account. Now, I can not retrieve my admin rights because he kept asking admin password that I don't know. System Restore didn't help coz' it was not far enough for the moment I changed my standard user account.

  I called Dell, but I don't want to pay the support service which costs more than a hundred dollars.

  I need some help on how I could get my admin rights back again.

  I have no copy of the installers for some of my important software which is why I'm afraid to reinstall the program, or even do a system recovery.

  I use a 32-bit vista. The only solution I can think of is to get "system user", but I don't know how.

  Please I need help.

  http://en.community.Dell.com/forums/p/19252460/19419355.aspx

  Read information about it to Dell link above.

  It's the Dell software, not Vista.

  If the info on the link above do not resolve the problem, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  See you soon. Mick Murphy - Microsoft partner

• What should I do if I change my domain server name?

  For example, of notes 357002.1 I know I need to recreate the em repository.
  
  Another thing is to change the tnsnames of customers.
  
  Is there anything else I need to do?
  
  Thank you
  Concerning
  Adriano

  PL see these Docs MOS

  422729.1 - how to change the host name when Oracle 10 G and ASM are used
  465545.1 - configuration of the DB after its host name change
  578169.1 - THE HOST NAME AND IP ADDRESS FOR THE DATABASE LAYER CAN BE CHANGED?

  HTH
  Srini

• Plex Media Server

  Anyone know if the plex media server can be installed on the px series?

  Hi ADSAB,.

  There is no official way to download the Plex Media Server on our devices. Although it is possible, it is not supported by Lenovo/Iomega and change the device may void the warranty if problems occur. Some users on a third party site were able to operate, however we cannot provide support for this. http://Forum.NAS-Central.org/viewtopic.php?f=279&t=9801

• 4300 WNDR media server is not available

  Hello.

  I have configured the media server on my WNDR 4300 and I checked that the connected USB drive is "authorized" (extendent USB setting). However, customers DLNA cannot connect to the system and it is not visible in the network.

  I tried iPhone MoliPlayer, Windows 7 with VLC player, Windows 7 with media player, LG TV and receiver Yamaha. Windows 7 server is directly attached to the device WNDR.

  \\Readyshare works correctly.

  I had stopped access control and restarted - no difference (always not visible).

  I checked that all the devices are allowed to connect to the network (new authorized devices).

  I rebooted several times WNDR without alteration.

  I have no idea what setting could be the problem / reason for this behavior.

  I have the firmeware 1.0.2.80 which seems to be the last.

  Any idea?

  Thank you.

  Axel

  Hello

  I was able to delete the folder and change permissions rebuilt DB DLNA. Now everything works.

  So I think that this issue is resolved.

  Thank you

  Axel

• Error number: 0x800CCC0D, the host 'POP3' could not be found. Please make sure you entered the server name correctly in Outlook Express 6.

  Original title: "POP3" server could not be found...

  I get the following error message every time I try to use Outlook Express 6 as my default email: 'the host 'POP3' could not be found.  Please check that you have entered the server name correctly.  "Account: 'POP3', server: 'POP3', Protocol: 'POP3', Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D".  I have a Dell Optiplex GX110 desktop computer with a processor Intel Pentium III (996 MHz, 256 MB RAM).  I already know that I have to increase the amount of RAM, but I don't think this is part of my problem.    I am connected to a local network, Verizon (Internet, cable TV and phone package). I run Microsoft Windows XP Professional (5.1.2600) 2002 with service pack 3 version.  I check frequently that my system is configured to automatically receive all updates for Windows XP more updates from Microsoft.  QUESTION: Is there a version of Microsoft in September 2011 that had something to do with POP3 servers?  Obviously it did not automatically installed in my computer.  I even checked my system twice to make sure that Microsoft was on my list of safe sites.  Please help me.  I really want to use Outlook Express 6 as my default email.

  Thank you!
  George Raynes

  Hi GeorgeRaynes,

  1. were you able to use Outlook Express 6 correctly previously?

  2 have you made any hardware changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  Hope the helps of information.
  Please post back and we do know.

• wrt1900ac DLNA server... help

  So my router has the latest firmware linksys (V1)...  IM using a 4 WD to USB drive connected to the esata/usb port.  Media Server is enabled in the linksys UI, without restrictions, and all media is shared on the disk.   And it has just recently been scanned.  The drive is formatted for HFS with about 700 GB of content.

  I can see the drive without problem when I connect from my laptop computer and desktop via wifi... and performance is very catchy, works very well.

  But I can't get one of my DLNA clients to see the player to stream content...  EXCEPT, when I eject the disc (using the safe to eject button in the user interface of linksys) and reconnect it to the USB 3 port... I can see the content on my DLNA clients for a short period of time... like maybe 5 minutes... then it disappears again... but if I eject... and change USB ports again... it appears again... but then disappears again, very fustrating!

  Nevertheless I can still connect to the drive with my laptop anyway... it's just when I want to distribute content via DLNA which he out craps...

  thoughts? Here, any help would be appreciated!

  so, before that I got the firmware, I just did a few double check... and there were 3 customers wireless connected to my network, legitimate customers mind, but they were NOT listed in the DHCP tables or in the map network... so I reinstalled the 1.1.8 firmware... and boom!  The DNLA kicking around... and all devices on my network showed up... the new firmware is a piece of dog shit!

  DO NOT USE THE LATEST FIRMWARE... PURE * beep! *

  funny, it was... the linksys that UI prompted me downloaded the latest firmware...  HAHAHA...

  It's very sad for a router that is not only nostalgic for me to my wrt54g faithful... but who has so much promise... yet they cant deliever on software to run it... as geezus people... Hire an outside company to code the * beep * thing if you have too... your charging $ 300 for this thing... make it work how it was announced to.  I think it's a fair request.

• Caveat on the multimedia server "Media Server database is inconsistent"

  Hello

  Does anyone have any documentation about this warning that occur on VSMS (Media Server)?

  Description: Database server is inconsistent

  Detail: Couldn't update saving SMD file with record id of the repository. Check the save location in the database of the media server.

  I searched on google but still can't find documentation on this subject of warning.

  The VSMS and VSOM are not co-located and version 7.6.0. The platform OS is RedHat Enterprise Linux Server version 6.4 (Santiago).

  Thank you in advance.

  It combined not for the 7.6 VSM 1 fix and there is no Bug id created this question.

  Just an intern created the script of BU, who has been synchronized with VSOM server status can be reset to clear the incompatible database errors.

  Solution:

  To control the problem, check the recording_location table in the database VSMS to check all video repositories are correctly by running the following database query:

  # sudo UMS EI /usr/BWhttpd/mysql/bin/mysql--defaults-file=/usr/BWhttpd/mysql/ums/ums.cnf ' select l.name, t.name as 'Type', s.name 'State' of recording_location l, recording_location_type t, admin_states s where l.type = t.enum_value and l.admin_state = s.enum_value order by l.name, t.name;

  +----------+---------------+---------+
  | name | type | State |
  +----------+---------------+---------+
  | /media2 | Media | permit |
  | failover | remote_server | permit |
  +----------+---------------+---------+

  ++ To add the missing partitions, download the dbinconsistent.zip file attached below and download the file on the server of the VSM.  Unzip the file and run the script on VSMS database server:

  # Unzip dbinconsistent.zip

  # sudo /usr/BWhttpd/mysql/bin/mysql--defaults-file=/usr/BWhttpd/mysql/ums/ums.cnf UMS EI "delete from recording_location where name = 'failover ';
  # sudo /usr/BWhttpd/mysql/bin/mysql--defaults-file=/usr/BWhttpd/mysql/ums/ums.cnf UMS<>

  Then restart the VSM software on the server.  When the server comes and it has synchronized with VSOM server status can be reset to clear the incompatible database errors.

  Hope this explanation helps you.

  Thank you

  Jayesh

• Service for TVersity Media Server gives error 1067 (crash)?

  Service for TVersity Media Server worked fine for 2 hours.  Has suddenly started to show as "stop" or "doesn't work" in the program.

  If I start it admin services, it gives 1067 (crash?) without indicating the reason.

  I stopped, reset the computer and tried to run it manually and still get the same error.

  I changed it to local office for the user login, same error. If I try to start it without the program running, opinion said "some services require" the program to run. If I run the program, Error 1067.

  Currently, there is no other apparent errors in the services.

  Running Windows 7 Ultimate, updated today.

  Hi Ruth,.
   
  Have you done a recent software or hardware changes to the system?
   
  This problem may occur because of recent changes on the system who may have changes settings for TVersity Media Server.
  Given that the problem is related to the TVersity Media Server service, you can get in touch with TVersity Media Server supports for assistance.
   
  For more information, see the article:

  TVersity Media Server FAQ

  Hope the helps of information.