XML export for translation, excluding the Master slides

Similar Questions

• Buttons on the master slide?

  Captivate 8 demo version.

  Trying to place a button on the master slide, but the menu is inactive. I'm doing something wrong?

  Currently using forms with an opacity of zero to hover over my pictures button so that it would work as a button with the default image has changed.

  The interactive object that is only possible on a master slide is the button of form; Ditto for the question/score slide:

  Why I like the shape buttons - Captivate 6! -Captivate Blog

  Shape toggle - Captivate 6 - Captivate blog buttons

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

• Problem with the use of the lightbox in combination with buttons on the Master slide

  I want to use one have a Walker of popup layer (with content), the user clicks a button on the slide.  The user can close with a button which also appears Walker that the lightbox appears.

  The lightbox layer covers the complete breech the user should click the button close before the next slide can be visited. Everything works fine

  Problem:

  Then I used and prevoious buttons on the slide master and although the layer seems to be on the top of the next and previous buttons, they stil working.

  How can I prevent the buttons on the master slide to work Walker watch the light table?

  Vico

  Each interactive object remains active even if it is covered by a non-interactive object.

  More information on the use of the shape of the buttons, either model of slides or time during the rest of the project: http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6

  ATTENTION: during time during the rest of the project, to make visible everywhere normally you put on top. But in this case, which means they'll be on top of the viewers. I did pass on the viewers once, maybe I should write in a blog.

  Lilybiri

• Exit button doesn't work is not on the Master Slide

  I have an exit with the attached exit action button on my e-learning project in model of slides, poster so all on all other content model of slides. This, in turn, displays the button exit on any slide I want to add to my project. Is there any reason the exit action attached to this button may not work? Whenever I am in my project to examine, the button never closes the project. It is just click, but does nothing. Do I need to have the action of the button available on the slides to master CONTENT rather than the main model of slides?

  

  @wc @ fmiosa as moderator, I have to ask you to NOT post answers that are wrong or mislead other users of Captivate. I considered that the deletion of your response, but you are going to insult me (new) if I do. When you say "Buttons do not work when, on the model of slides", your response seems to say that you can insert buttons on a master slide, but they never work? This is not good at all: If you can insert a button on a master slide must be a button of form because the other buttons cannot be inserted on a master slide at all. Apparently you missed the appearance of form buttons, almost 4 years ago. They are interactive objects only you can use on slides of masters, you can insert on the first slide and the time for the rest of the project, you can use them on the question slides and slides of score. If you always use the Captivate 5.5 or before, which mentions at least in your response, adding that this could change in future versions

  Why I like the shape buttons - Captivate 6! -Captivate Blog

  Shape toggle - Captivate 6 - Captivate blog buttons

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

  1 share = 5 buttons toggle - Captivate blog

  Lilybiri

• Xml file for reading in the clob in the staging table column

  Hello
  
  I am trying to query the intermediate table with the database adapter that has the column type CLOB containing the XML file. How to extract the XML of CLOB and map the fields to the another final scheme variable.
  
  Thank you
  
  Published by: chaitu123 on Sep 20, 2009 08:16

  (1) when you create DBAdapter on a table that has the clob column watch closely the xsd created for the DBAdapter cloumn clob element must be a String data type

  (2) create xsd for Xml files and create the variable of the xsd element

  (3) use ora:parseEscapedXML("yourDBAdapterclobElement") for XmlFileVarilable

  Krishna

• install the new drive in slave. you want to transfer the OP for slave to the master drive. The slave to the master change and OP work, as did the master drive.

  Hello, I install a new drive (slave at first) to be the master, after I transfer of windows on them. How can I transfer the data to the new disk that the operating system runs when the slave returned to be the master drive?

  Go to your NEW Hard Drive from the manufacturer website.

  They normally have available software cloning to transfer the operating system on a new hard drive.

  See you soon.

  Mick Murphy - Microsoft partner

• Captivate 9 Import/Export for translation did not more?

  So far, I often used the function to export and import textfields or any other element with the text to be translated. With CP9 whether a text box, a button or whatever, none of the changes in the exported .doc is adopted after the import.

  I use Word 2013 and, so far, he is still working with CP5.5 / CP7 and CP8 in this constellation.

  Is anyone successfully exported, changed and imported something with CP9?

  Thanks for the reply. The error was mine. I tried different options and features. For this I created an empty project; some items added; exported; and after setting in Word reimport the .doc file.

  The reason why it did not work, it's that I didn't save the Captivate project after export. CP recognizes only after registered press, that something has changed in the exported file .doc. Now that I made the mistake again, I confess that I came across exactly the same problem already in 5.5...

  Thank you

• Need help with the help of an xml file for changes in the system profile

  I'm looking to accelerate the deployment of new rack-mounted servers by updating their server through xml import profile information and I'm stuck.

  I am able to successfully export the profile as an XML to NFS.

  I'm not having luck changing data to import.

  My first attempt great base is simply by changing the name of drac.

  Here are the contents of the xml file that I am trying to import:

  ");" >
  laboratories-001-dev-a01 - dc1.example .net
  The job fails.

  Any ideas on what I am doing wrong?

  Hi Martin,

  I found my problem.

  In the GUI, you can enter a COMPLETE domain like something.example.com name in DNS Rac name field.

  Who will fail via importing a racadm as apparently a. is not allowed during the updating of the attribute "NIC.1 #DNSRacName".

  Is this a bug of the DRAC?

• Need help creating tip Action for Navigation "Inside-the-same-slide" to let the user Play slide again

  I use 8 Captivate. It is a scenario of HTML5.

  I have need of a button which will allow the user to "replay" the slide. I don't want the button to take the user to the front, back, or do anything else. I want the button to start the slide at the beginning and play without interruption until the end.

  I am looking for help on how to do this using variables and advanced for HTML5 actions or, Alternatively, recommendations on the good tutorials for advanced actions. I prefer the tutorials that will allow me to start at the bottom. I was not able to find tutorials advanced action that assume no prior experience.

  I know that each new user must say this, and I'm afraid that's true for me too. If I can't create a HTML5 work quickly replay button, it will get me in trouble with the client.

  Try this:

  

  cpCmndGotoSlide is a system variable, which the index starts at 0. The variable cpInfoCurrentSlide system includes an index starting at 1. The reason for the subtraction in this Expression. You need to add continue because a tip action will not release the read head.

  Why choose Standard Simple action? -Captivate Blog

• Hide the smart shape on master slide button

  Hi all

  Looks like I have another issue of nag... I have a project (Captivate 6) that contains the FOOTER navigation that I used smart shape buttons... the problem is, I have a few slides with popups... and buttons are still ALIVE in the pop-up window. And because I can't quote a button on smart shape on a master slide, I don't know how to identify it with a tip Action...

  I know that I can go the L-O-O-O-O-O-N-G way, using a different Master and duplicate the navigation on the slide that will give me the ability to appoint the Smart form buttons... I can't HIDE/SHOW them... but the project has 4-8 pop-up windows that would be a large number of buttons...

  So, is there a way to hide/show buttons created on a model of slides?

  Thank you!

  Not possible: objects on master slides do not receive an identification, which means they cannot be used in a fast action (one of my many requests of feature for quite some versions).

  In such a case of use I would not place the buttons on form on the model of slides, but on the first slide and their time for the rest of the project, always on top (if it can be done here?). In this case, they will have a unique ID for the whole project. However, there are a few possible problems for buttons in form with a suspension point. When you use a suspension point for a button shape on the master slide, the break will always happen at the end of each slide, regardless of its duration. This is not the case for form buttons timed for the rest of the project.

• Master Slide templates are not displayed correctly when out of sight of the film

  I have problems with the edit mode mask in captivate. I adjusted correctly the blades to fit the design I want, however when I add a new slide with this layout, buttons and boxes are cast in all directions. Thus, many of the items I'd remove the quiz pages cannot be deleted and when you try to change the text for the default value is correct, must respond to questions box... etc I'm not able to change this text.

  Master quiz slides are very special, do not try to remove all the objects because they have all of the features. You can edit, move things and creating these masters slides question slides you will be able to hide some as rear buttons (see Preferences Quiz), claire.

  The legends of feedback (or forms, if you choose for them to CP8.0.1): change the text in Quiz preferences, default labels, not in the slides of masters.

  As for your other problem, I never had this problem at all. My workflow is first edit the object Styles in the Style of the object manager, and then edit the master slides, starting by the slide master main where appropriate. Do NOT change the blank slide (you can create a duplicate / change this one) If you ever want to insert slides of simulation software. Maybe your idea of slide masters is not exactly what it is in Captivate? Themes are objects, master slides and skin styles and you have version 8 also has the theme color palette that can be modified or customized.

  Tell what version you use is essential for a correct answer. And if you're on CP8, please also indicate if you are talking about a normal or sensitive project.

• 'Room for the heads side' on the Master Pages does not not on body pages.

  In a new document, I created master pages, each with a text frame type of the "model for Page body text, frame 'each with the same tag stream."

  For each block of text, I enabled property of "heads of Lounge next door.

  When I apply master pages to the body of the document (Format > Page Layout > Master Page use > Use Master Page: > Apply), the property of "heads of salon for side" disappears.

  Does anyone know why my text frames do not follow the format of applied master page?

  I use Framemaker 11.

  > For each block of text, I enabled property of "heads of Lounge next door.

  If I remember a recent discussion, you must enable that via:

  Format > Page layout > column layout

  [*] The heads side room

  and it is a document, not just for chosen setting the Master Pages.

• How to modify objects on master slides in Keynote?

  I tried to create my own master slides in keynote. When I finished that in fact, I tried to put my own text in titles and the body, I created, but it did not work. The sign "this object can be changed in the model of slides only" keeps appearing. How can I fix and what I am doing wrong?

  Start a new presentation: File > New

  View > Edit Master Drag

  Right-click on the slide, and then select duplicate

  Double-click the name and type a new name

  Insert > text box

  Change text attributes in: Inspector > Format > text
  

  with the text box selected, Format > advanced > define as space reserved for text

  Click on the done button, the lower right

  back in slide view, double-click the text box to enter text with the formatting used in the master slide

• Master slide background of sizing in projects of nature responsive

  Hello

  New to Captivate 9 and despite hours searching I can't resolve these issues with a responsive project:

  -J' inserted a background image (16:9) for the master slide, but it leaves spaces upstairs and downstairs. What size or proportion should be the background image?

  -L' background image includes a logo which is piled up in the mobile portrait and portrait of tablet - y at - it another way to prevent distortion of logo?

  Appreciate help or the pearls of wisdom.

  Graeme

  For your first question: it depends on the resolution, you chose for the project in primary mode: If this is a ratio of 4:3, make sure you change the image to this ratio. Best practice is to give exactly the size (width and height in pixels) which is necessary for the primary display. You can edit images in Captivate (also cropping).

  Regarding the logo: it would be better to insert separately as an image. Don't forget to set the width to a % and the height to Auto (Position properties), which will keep the fixed width/height ratio. For logos, you could also choose for a fixed size in the views of breakpoint, or give a minimum size to keep visible even in very low browser resolutions.

• Delicate design, positioning and Organisation of objects on Master Slides quiz problems

  Hello

  I just upgraded to 9 Captivate and would switch to suitable designs.  Some problems, however.

  First of all, when I try to modify the positions of certain objects on slides in quick mask mode, the Position of the object on the tab Position have right and left gray.  I, for example, like to move and position of in the MCQ response boxes would design ('Type 1 from here' etc) to the left of the slide to make room for images on the right.  For some reason, I'm not allowed to do any settings on the tab position I try (and I think I tried them all).

  Secondly, the menu item "organize" is grayed out and if I put pictures on the slide, they fall behind the objects already here and cannot be ' brought forward "."  I don't know why the new objects (i.e. images) fall behind the other objects permanently.

  This means that I can't move some existing objects as I would like and I can't put pictures above them either.

  Very clearly, I'm doing something wrong, but the research, as I might, I can't find answers, and I'm starting to think better to return to the inadmissible designs.

  Grateful for any help, anyone can give.

  Richard

  Your question is not quite clear to me, but he can offer you already some explanations.

  Questionnaire slides have very strict rules. All objects incorporated, those are the objects without an individual timeline, are always on top of the stack. You can't have custom objects appears above one of the built-in objects. I found a few exceptions as described in this article:

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

  What I said now is not specific to a sensitive project, but to all projects.

  With respect to positioning, see what you mean: you cannot resize the boxes of individual response, nor the overall box on the master slide, but you can on the slides of individual questionnaire. Look at this slide:

  

  I started by looking at the Advanced setting: by default, it is set to align horizontally, be sure to uncheck this option.

  For answers: select the global zone that has all the answers. You can see I've changed its size and position.

  I hope this can help?