XMLTYPE column is PROTECTED or BASIC FILE BINARY?

Similar Questions

• Outlook and printers do not work and SFC error Windows Resource Protection found corrupt files but was unable to solve some of them.

  Separated from this thread.

  SFC all said above.

  Windows resource protection found corrupt files but was unable to solve some
  of them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.

  I was hoping that fixing the above might fix below.

  I had 2 problems.

  In outlook I have about 300 deleted messages from the deleted folder and when I entered the box and they were all there. I did it again and it happened again. Finally I did drag the files to the junk e-mail folder and not empty and they were gone and he seems to have stopped.

  The other problem is with the printer profiles. I changed routers and had to reinstall the printers.

  They appear ok in devices and printers, but when I go to print all old printers appear. They are not in the Control Panel, just new, but the drop down menu select printer boxes have many printers that are not active or working more. I would like to get rid of them.

  Thank you

  Harv

  SFC checks really just a list of some of the most important files (such as those required in order to activate the system at a very basic level), and generally what he is going to fix all that is at a "higher level." And Yes, it will almost always find one or two tiny little things but they are not significant failures, just a file with a version number of new or more than what's in the list.  Unless there is a symptom of a problem, probably best simply to ignore it.

  Just follow best practices: do not run as administrator for daily use, maintain and keep a backup (use a simple as automatic backup, Carbonite or store your files in OneDrive).

• Add to the XMLTYPE column

  Hello

  I have a requirement to insert a new XML tag in the existing XMLTYPE column.

  Oracle version: Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

  create table rds_xml_config (module_name varchar2 (32), module_type varchar2 (100), config_xml xmltype);

  insert into rds_xml_config values ('TRANSMIT_SEQ', 'INTERFACE',' < transmit_seq > <!-file sequence number will be updated after each race-> < file = "RTP" Type_de_fichier > < file_seq_num > 2457 < / file_seq_num > < / file > < file Type_de_fichier = 'RTS' > < file_seq_num > 2453 < / file_seq_num > < / file > < Type_de_fichier = "RTL" file > < file_seq_num >) 2522 < / file_seq_num > < / file > < / transmit_seq > ');

  I have to add < file = "RTX" Type_de_fichier > < file_seq_num > 0 < / file_seq_num > < / file >.

  As a temporary work around, I used below the update statement.

  Update rds_xml_config

  Set config_xml =' < transmit_seq > <!-file sequence number will be updated after each race-> < file = "RTP" Type_de_fichier > < file_seq_num > 2457 < / file_seq_num > < / file > < file Type_de_fichier = 'RTS' > < file_seq_num > 2453 < / file_seq_num > < / file > < Type_de_fichier = "RTL" file > < file_seq_num > 2522 < / file_seq_num > < / file > < file = "RTX" file_type > < file_seq_num > 0 < / file_seq_num > < / file > < / transmit_seq > '

  WHERE module_type = "INTERFACE".

  AND module_name = "TRANSMIT_SEQ";

  SEQ numbers will be modified for each race of the file, so I cannot use the work temporary around during migration to production, have we a way to add new XMLtag.

  Thank you

  Rambeau

  Search in INSERTCHILDXML

  http://docs.Oracle.com/CD/B19306_01/server.102/b14200/functions066.htm

  SQL> select a.config_xml.extract('*') old_xml
    2       , insertchildxml(config_xml, '/transmit_seq', 'file',xmltype('10000')).extract('*') new_xml
    3    from rds_xml_config a;
  
  OLD_XML                                                                                              NEW_XML
  ---------------------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------
                                                                                         
                                               
                                                                                   
      2457                                                                 2457
                                                                                                  
                                                                                   
      2453                                                                 2453
                                                                                                  
                                                                                   
      2522                                                                 2522
                                                                                                  
                                                                                          
                                                                                                           10000
                                                                                                         
                                                                                                       
  

• excerpt from the XMLType column

  In my XMLType column I'm storing XML content that is the xml below.

  <? XML version = "1.0" encoding = "UTF-8"? >

  < project >

  < basics >

  < attribute name = "Id" > 3197915 < / attribute >

  < attribute name = "Name" > 345 < / attribute >

  < attribute name = "Révision" / >

  < name of attribute 'Type' = > project < / attribute >

  < / basics >

  < relationship / >

  < children >

  < application >

  < basics >

  < name of attribute 'Type' = > Application < / attribute >

  < attribute name = "Name" > rty < / attribute >

  < = "Scope" attribute name > SCOPE_PROJECT < / attribute >

  < attribute name = "Révision" / >

  < attribute name = "Id" > 3197918 < / attribute >

  < / basics >

  < relationship type = "Project relationship Configuration" >

  < attribute name = "Subclassification subcomponent" / >

  < attribute name = 'Type of subcomponent' / >

  < attribute name = "Quantity" > 1 < / attribute >

  < attribute name = "Unit of measurement" / >

  < = "Scope" attribute name > SCOPE_PROJECT < / attribute >

  < attribute name = "Post number" / >

  < attribute name = "Additional Information" / >

  < / relationship >

  < children / >

  < / application >

  < typical >

  < basics >

  < name of attribute 'Type' = > rrrr < / attribute >

  < attribute name = "Name" > rrr_Mo < / attribute >

  < attribute name = "Id" > 944674 < / attribute >

  < = "Scope" attribute name > SCOPE_GLOBAL < / attribute >

  < attribute name = "Révision" / >

  < / basics >

  < children / >

  < / typical >

  < application >

  < basics >

  < name of attribute 'Type' = > Application < / attribute >

  < attribute name = "Name" > yu123 < / attribute >

  < = "Scope" attribute name > SCOPE_PROJECT < / attribute >

  < attribute name = "Révision" / >

  < attribute name = "Id" > 3197922 < / attribute >

  < / basics >

  < children / >

  < / application >

  < / children >

  < / project >

  How to write a query to extract the Application name?

  Here, it should return "anais" and "yu123".

  I'm using Oracle 11 g.

  Thanks in advance.

  Something like the following, where TMP_XML. DOC is my XMLType column:

  SQL> select x.*
    2  from tmp_xml t
    3     , xmltable('/Project/Children/Application/Basics'
    4         passing t.doc
    5         columns application_name varchar2(30) path 'Attribute[@Name="Name"]'
    6       ) x
    7  ;
  
  APPLICATION_NAME
  ------------------------------
  rty
  yu123
  

• Compare the values of the XMLType column to two different lines using XMLDiff in GR 11, 2

  I have a table of data with a row of XMLType and I need a way to compare the XML data against the other. I guess I could use a function and return a XMLDIFF base output to the caller, but the function logic is a bit fuzzy. Would be nice to format the output finally in a table format.
  
  I looked on http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions241.htm#SQLRF20025 and output in a format of table as shown in Re: how to find compare and identify between xmldocs .
  
  I ran across some examples do not explain the best way to compare the XML code that is in the best performing XMLType column.
  
  Any help would be appreciated.

  Are you referring to different rows in the same table or different tables or?

  Basically, you need to change the example of Odie so that the XMLDiff retrieves the XML from places in Pb, say something like

  XMLDIFF(SELECT aXml FROM table WHERE ...,
          SELECT bXml FROM table WHERE ...)
  

  This allows to avoid bringing the XML of the DB in the client code.

  Don't know if that's what you're looking for, but hopefully it helps a little.

• ADF and the use of the XMLType columns

  After discovering the Jdeveloper 11 g was able to generate business components/data controls for complex web services (see this tutorial excellet http://www.oracle.com/technology/tech/fmw4apps/agile/pdf/adf11g-agile.pdf), I assumed that jdev 11 g should now have the same capacity on XMLtype columns with a registered scheme, and was therefore a good match for our enforcement objectives be able to edit
  parts of an XML document to aid in the face of components and Assembly/store the document in a way centic document in a relational/XML database XMLType column hybrid.
  
  I tested this point, has created a table with an XMLType column binary, saved the schema in database (11g) and jdev(11g) and generated my components.
  
  
  I was very disappointed at the discovery of the structure of data controls stops at the level of the attribute in the table (ie the XMLType column), so none of the structure of the XML document is revealed or can be used in a meaningful way through data control.
  
  Am I missing something here? should not control data generated reveal the XML structure and allow the use of components of forms/table faces on some parts of the structure of the document? I'm not a java programmer, so was really hoping to do this with data not generated controls beans not.
  
  If it is just to treat it as a CLOB, what's the point of registered xsd schemas?

  Yes, it is through java. Sorry

• Inserting XML data in xmltype column

  Oracle version: 10.1.0.5
  OpenVms Alpha V8.3
  
  (1) tried this and getting the error below. Place a zero and remove charset. Same mistake.
  
  INSERT INTO xml_demo (donnees_xml) - xmltype column
  VALUES
  (
  XmlType
  (
  BFILENAME ('XML_DIR ',' MOL.) XML').
  nls_charset_id ('AL32UTF8')
  ),
  );
  
  
  ORA-22993: much of the specified input is greater than the quantity real source
  ORA-06512: at "SYS." DBMS_LOB", line 637
  ORA-06512: at "SYS." XMLTYPE", line 283
  ORA-06512: at line 1
  
  
  (2) this PL/SQL block works. However maximum brute size about 32K. The file may be around 100 K. May be I can load into a table of raw and somehow concatnate to insert. Not sure if it's possible, but I'm sure there must me a simple way to do this.
  
  Subset of the xml file is pasted below.
  
  
  Set serveroutput size 1000000
  DECLARE
  bfile file1;
  XMLType v_xml;
  len1 number (6);
  v_rec1 raw (32000);
  
  BEGIN
  File1: = bfilename ('XML_DIR ',' MOL.) XML');
  DBMS_LOB. FileOpen (File1, DBMS_LOB.file_readonly);
  len1: = DBMS_LOB.getLength (file1);
  v_rec1: = dbms_lob.substr(file1,len1,1);
  v_xml: = xmltype (UTL_RAW. CAST_TO_VARCHAR2 (v_rec1));
  
  INSERT INTO xml_demo (donnees_xml) VALUES (v_xml);
  COMMIT;
  DBMS_LOB. FileClose (file1);
  
  exception
  while others then
  dbms_output.put_LINE (sqlerrm);
  DBMS_LOB. FileClose (file1);
  END;
  /
  
  
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < MolDocument DtdVersion = "3" DtdRelease = "0" >
  < DocumentIdentification v = "MOL_20100331_1500_1600" / >
  < DocumentVersion v = "1" / >
  < V DocumentType = "A43" / >
  < CodingScheme = v "A01" SenderIdentification = "17X100Z100Z0001H" / >
  < SenderRole v = "35" / >
  < ReceiverIdentification codingScheme = v "A01" = "10XFR-TEN - Q" / >
  < ReceiverRole v = "A04" / >
  < CreationDateTime v = "2010-03 - 31 T 14: 10:00Z" / >
  < ValidTimeInterval v = "2010-03 - 31 T 15: 00Z / 2010-03 - 31 T 16: 00Z" / >
  < codingScheme domain = "A01" v = "10YDOM-1001A001A" / >
  < MolTimeSeries >
  < ContractIdentification v = "RTE_20100331_1500_16" / >
  < ResourceProvider codingScheme = v "A01" = "10XFR-TEN - Q" / >
  < CodingScheme = v "A01" AcquiringArea = "17Y100Z100Z00013" / >
  < ConnectingArea codingScheme = v "A01" = "10YFR-TEN - C" / >
  < AuctionIdentification v = "AUCTION_20100331_1500_1600" / >
  < BusinessType v = "10" / >
  < BidTimeInterval v = "2010-03 - 31 T 15: 00Z / 2010-03 - 31 T 16: 00Z" / >
  < MeasureUnitQuantity v = "MAW" / >
  < v currency = "EUR" / >
  < MeasureUnitPrice v = "MWH" / >
  < v direction = "A02" / >
  < MinimumActivationQuantity v = "50" / >
  < v status = "A06" / >
  < period >
  < v TimeInterval = "2010-03 - 31 T 15: 00Z / 2010-03 - 31 T 16: 00Z" / >
  < resolution v = "PT60M" / >
  <>interval
  < v pos = "1" / >
  < v Qty = "50" / >
  < character v = "50.45" / >
  < / interval >
  < / period >
  < / MolTimeSeries >
  < / MolDocument >

  Hello

  A couple of workarounds, try:

  DECLARE
  
     v_lob   CLOB;
     v_file  BFILE;
  
  BEGIN
  
     v_file := BFILENAME('XML_DIR','mol.xml');
     DBMS_LOB.createtemporary(v_lob, true);
     DBMS_LOB.fileopen(v_file);
     DBMS_LOB.loadfromfile(v_lob, v_file, DBMS_LOB.getlength(v_file));
  
     INSERT INTO xml_demo VALUES( xmltype(v_lob) );
  
     DBMS_LOB.fileclose(v_file);
     DBMS_LOB.freetemporary(v_lob);
  
  END;
  /
  

  or,

  DECLARE
  
     v_lob   CLOB;
  
  BEGIN
  
     v_lob := DBMS_XSLPROCESSOR.read2clob('XML_DIR', 'mol.xml', nls_charset_id('AL32UTF8'));
  
     INSERT INTO xml_demo VALUES( xmltype(v_lob) );
  
  END;
  /
  

• What is the default size of the XMLType column?

  I have a table with 1 type of crude and 1 XMLType column. In the XMLType column I'm inserting XML, more
  
  < ocaStatus xmlns = "http://xmlbeans.apache.org/ocastatus" >
  < status >
  < > 990 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2010 - 01 - 19 < / statusDate >
  < user name > OcaNimsAcf < / userId >
  < comment > DocumentnotinNIMS < / comment >
  < / status >
  < status >
  < > 990 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2010 - 01 - 19 < / statusDate >
  < user name > OcaNimsAcf < / userId >
  < comment > DocumentnotinNIMS < / comment >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 09 - 16 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 09 - 16 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 09 - 16 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 29 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 29 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 28 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 28 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 27 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 26 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 25 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 20 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 20 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 20 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < statusCode > 306 < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 04 - 21 < / statusDate >
  < user name > u0075970 < / userId >
  < / status >
  < status >
  < > 301 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 02 - 05 < / statusDate >
  < user name > DMS_WORKFLOW < / userId >
  < comment > < / comment >
  < / status >
  < status >
  < > 990 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2010 - 01 - 17 < / statusDate >
  < user name > OcaNimsAcf < / userId >
  < comment > Comparedfornimsacf < / comment >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 09 - 16 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 09 - 16 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 09 - 16 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 29 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 29 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 28 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 28 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 27 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 26 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 25 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 22 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 21 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 20 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 20 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < > 501 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 08 - 20 < / statusDate >
  < user name > oca_scheduled_job < / userId >
  < / status >
  < status >
  < statusCode > 306 < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 04 - 21 < / statusDate >
  < user name > u0075970 < / userId >
  < / status >
  < status >
  < > 301 statusCode < / statusCode >
  < statusDateclass = "sql-date' > 2008 - 02 - 05 < / statusDate >
  < user name > DMS_WORKFLOW < / userId >
  < comment > < / comment >
  < / status >
  < / ocaStatus >
  
  The XML is very long. For insertion in the table, I use xmlparse() function to get XMLType.
  While doing this I'm ORA-01704: string literal too long error. It is said can accommodate maximum 4,000 characters.
  I guess that XMLType is stored as a default CLOB. So it should allow more than 4000 characters.
  How can I store data xml with more than 4000 characters.
  
  Thank you.

  XMLParse is a SQL function, you cannot use a string literal is longer than 4000 characters.

  Instead, you can declare a PL/SQL VARCHAR2 variable, which can contain up to 32 k characters and use the XMLType constructor:

  DECLARE
  
   xmlstr VARCHAR2(32767) := '';
   xmldoc xmltype;
  
  BEGIN
  
   xmldoc := xmltype(xmlstr);
   INSERT INTO your_table(xml_data) VALUES(xmldoc);
  
  END;
  

  For strings longer than 32 k, you may need to load it from a file.

• Creating indexes in the XMLType column

  Hello
  
  I have the following for XML document stored as an XMLType column.
  
  < ocaStatus xmlns = "http://xmlbeans.apache.org/ocastatus" > < status > < > 934 statusCode < / statusCode > < statusDate > Wed Apr 07 16:05:53 GMT + 05:30 2010 < / statusDate > < userId > u0121845 < / userId > < comment > sent to FLC < / comment > < / status > < status > < statusCode > 934 < / statusCode > < statusDate > Wed Apr 07 15:58:25 GMT + 05:30 2010 < / statusDate > < userId > u0121845 < / username > < Comment > sent to FLC < / comment > < / status > < status > < statusCode > 934 < / statusCode > < statusDate > Wed Apr 07 15:54:02 GMT + 05:30 2010 < / statusDate > < userId u0121845 > < / userId > < comment > sent to FLC < / comment > < / status > < status > < statusCode > 750 < / statusCode > < statusDate > 2010 - 03 - 31 12:39:41.580 GMT + 05:30 < / statusDate > < u0121845 userId > < / userId > < comment > metadata of the Document is correct. < / comment > < / status > < status > < statusCode > 934 < / statusCode > < statusDate > 2010 - 03 - 31 12:39:41.580 GMT + 05:30 < / statusDate > < userId > u0121845 < / userId > < comment > sent to FLC < / comment > < / status > < status > < statusCode > 932 < / statusCode > < statusDate > 2010 - 03 - 31 12:39:41.580 GMT + 05:30 < / statusDate > < userId > u0121845 < / username > < comment > loaded Novus < /. comment > < / status > < status > < > 700 statusCode < / statusCode > < statusDate > 2010 - 03 - 31 12:39:41.580 GMT + 05:30 < / statusDate > < userId u0121845 > < / userId > < comment > Document is deleted from the OCA. < / comment > < / status > < / ocaStatus >
  
  I created as a result of the clues in the XML
  CREATING INDEX 'OCA_DEV '. "' OCA_STATUS_CODE_INDEX ' ON 'OCA_DEV '. "DOCUMENT_STATUS_XML"(EXTRACTVALUE('/ocaStatus/status/statusCode'));
  CREATING INDEX 'OCA_DEV '. "' OCA_STATUS_DATE_INDEX ' ON 'OCA_DEV '. "DOCUMENT_STATUS_XML"(EXTRACTVALUE('/ocaStatus/status/statusDate'));
  
  However, the problem is that I will be having several status within each XML that violates the indexing.
  Is there a way I can still create indexes for multiple State values in each XML file?
  
  Thanks in advance.

  Hello

  Take a look at the manual xdb (which version do you use?), for the 10.2 version, see: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb04cre.htm#sthref596
  It describes how you can index an XMLTYPE. Because you describe how you use, take a look at your needs.

  In 11G, you have the XMLINDEX to xmltypes indexing, you will find information here: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10492/xdb_indexing.htm#CHDFCGGI

  Herald tiomela
  Superconsult.nl

• How to use SQL * Loader to load the XMLType column with other columns?

  Hello
  
  I try to use sqlldr to load an XML file into a table with an XMLType column. I have found many examples where the entire table is an xmltype, but I'd like to load a lot of XML objects in a generic table for treatment with a single XMLType column and other columns to identify the load. A simple example, I have a constant column which I want to put during the download.
  
  The following example does not work: (.) No error either.
  
  create the table xml_upload
  (the varchar2 (10) of upload_type not null,)
  donnees_xml XMLType)
  /
  
  my control file:
  DOWNLOAD THE DATA
  INFILE * add
  IN THE TABLE xml_upload
  XMLType (xml_data)
  FIELDS ENDED BY ',' POSSIBLY FRAMED BY "" "
  (
  constant upload_type MARKET,
  donnees_xml
  )
  BEGINDATA
  < SALE_ORDER >
  TIM < CUST_CODE > < / CUST_CODE >
  < ORDER_NUM > 1234 > < / ORDER_NUM >
  < / SALE_ORDER >
  
  
  $ sqlldr my.ctl
  
  SQL * Loader: Release 10.2.0.4.0 - Production on Sun Sep 27 22:51:52 2009
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  Commit the point reached - the number of logical records 4
  
  SQL > select * from xml_upload;
  no selected line
  SQL >
  
  Any ideas on how I can do this? Did I miss something...
  
  I also played with the clause sqlldr lobfile, also without success.
  
  Current database version is 10g R2.
  
  Thank you
  Tim.

  The following works in 11.1.0.6

  LOAD DATA
  INFILE *
  INTO TABLE xml_upload TRUNCATE
  (
   upload_type constant 'MARKET'
  ,file_name filler char(100)
  ,xml_data LOBFILE (file_name) TERMINATED BY EOF
  )
  BEGINDATA
  test.xml
  

  SQL> select upload_type,xmlserialize(document xml_data no indent) from xml_upload;
  
  UPLOAD_TYP XMLSERIALIZE(DOCUMENTXML_DATANOINDENT)
  ---------- ----------------------------------------------------------------------
  MARKET        1
  
  SQL> 
  

• Difference between an XMLType table and one table with an XMLType column?

  Hi all
  
  Still trying to get my mind on all that XML stuff.
  
  Can someone explain briefly the difference between:

  create table this_is_xmltype_tab of xmltype;

  and

  create table this_is_tab_w_xmltpe_col(id number, document xmltype);

  What are the advantages and disadvantages of each solution? How are they really different?
  
  Thank you
  
  -Mark

  Sorry Mark, as far as I know it is not a real difference despite the fact that you can use the table with the column (ID), probably more effective for document-focused while driving the query via the ID column and anything else I can think off automatically about XMLType contra XMLType table columns is that (as far as I KNOW) you can not use a column of XMLType to shred the data into it via WebDAV o FTP. But then again I never really tried to do an XMLType column-based. Alternatives, for example, a binary XML column begins with a column of $ sys_nc_oid which is indexed, so in principle you shouldn't need an ID (number) column that has an index (a read also on http://www.liberidu.com/blog/?p=494). If there has been non-null that you could use this index for document oriented applications.

• TrueSuite Access Manager Protection key: invalid file

  Hello

  I have Tecra M10 (PTMB3A) laptop running Win XP SP3 and TrueSuite Access Manager 2.1.11.0

  I always using fingerprints from Windows logon without any problem, also I have quiet a few applications that are maintained and accessible by password Bank of TrueSuite. I have also a folder that contains protected by TrueSuite files and until recently I had no problems with this app at all.

  In the recent past, I noticed several times (occasional, non-persistent) when windows starts, the baloon tip popping up from system tray, saying that fingerprints are not in school and told him to click on the message to register fingerprints. I've been quiet happily ignoring these messages because there is no problem to access the files and using password Bank these 'non-status' and 'normal' windows sessions

  The last time I been stupid enough to click on that message and I discovered that my fingerprints are not there (or appear to be lost) and I signed them all over again, retaining the same windows password.

  A few days after that I tried to access my protected files (well I don't have them every day) but realized that I can no longer access these files anymore. Whenever I click on any of these files and move my finger on the sensor, the popup window warns that sweeping succeeded, however "Real-time Unprotection" appears "Invalid File Protection key" with a "Failed" status for this file.

  My question is:
  Is there a way to recover my files or any chance to recover/unprotect/hack this protection once and for all, that I am really frustrated with this product and none taken in charge the AuthenTec, the seller of this dubious utility at all.

  In my opinion, there is only a solution;
  You need to reinstall the TrueSuite Access Manager and need to reconfigure the password of fingerprints.

• How to unlock protected itune music files

  How to unlock protected itune music files

  Hello

  You must consider iTunes Match if you want your previous iTunes purchases updated to remove DRM. If you use Apple music you can't remove DRM of the music.

  Jim

• How to password protect an MP3 file so that the intended recipient is the only one who can open

  original title: password protect files MP3

  How to password protect an MP3 file so that the intended recipient (who has the password) is the only one who can open it and listen?

  Hi WillL_1955,

  ·         What is the operating system installed on the computer?

  Try the following.

  Method 1: Put the MP3s in a zip file, set a password on the zip file and not to say that the friend the password.

  How to create and use compressed (zipped) folders in Windows XP

  Compress and uncompress files (zip files) in Windows 7

  Method 2: You can get a third-party program that can help you achieve this goal.

  See also:

  Compress or decompress a file - InfoPath - Office.com

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• How to password protect shared XP files.

  I noticed how you can password protect Windows 7 file sharing (with the account user name and password). What's possible with Windows XP?

  Change password: net user guest newpassword

  Remove password: net user comments * (press twice)

  May also manage user accounts in Control Panel.

  Or type control userpasswords2 in the box run from the start menu.

  John