XP/Vista: Plugin Flash PPAPI 23.0.0.162 does not work in Opera and chrome

Similar Questions

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• Flash Player 21.0.0.242 does not work on Firefox 46.0.1 after installation of Windows 10

  Flash Player 21.0.0.242 does not work on Firefox 46.0.1 after the installation of 10 Windows on a laptop of Dell XPS 17 L702X. Continuously, it crashes. It works great with IE and Chrome.

  I tried the following:

  -Disabling Add-ons on Firefox

  -Do a clean installation of Flash Player

  -Do a reinstall of Firefox

  When I use "Flash Player Help" to check if Flash Player is installed, he said that my operating system is Windows 7. It is not; It's Windows 10. I used recommend it download when I looked at the Adobe Web site.

  What should I do to get Flash Player to work on Firefox?

  Thanks in advance for your help.

  
  

  
  

  I downloaded the 64-bit version of Firefox and Flash Player works now

  fine. I left the 32-bit version on my computer at the moment.

  Thanks a lot for your help. I really appreciate it.

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• swf flash cs6 pro file does not work in dreamweaver or chrome

  Hey there,

  Apologies extreme if this issue has already been raised in the forum, I wasn't able to find it by searching.

  I created a slide show in Flash Professional CS6 and published in format swf for Flash Player 11.6 and Action Script 3.

  It presents a fine Preview in flash player. However, when I insert the slideshow in my page Web in Dreamweaver CS6 (Using the Insert-> media-> SWF command) the content does not load mode live view, or it asks me to download and install the latest version of the flash player... That I have and have done so several times now.

  In addition, when I save the document and previsualisez in my web browser (tried it on Firefox, Chrome and IE9) just slideshow comes up empty space. Flash content is always there, as when I right click in this contextual menu flash space rises.

  My question is what is the problem with my slide show? Are there known problems of Flash Pro CS6 cause this behavior? How can I solve this?

  TL; dr My built in Flash Pro CS6 swf slideshow does not work in a browser.

  WHOWWW...

  for Flash Player 11.6

  Back down to as little a possible version... 10 or more if possible.

  My advice... never... never target the latest version of the plugin... most of the users will NOT have this plugin installed.

  Down and if that doesn't work, post a link to the Web page.

  Best wishes

  Adninjastrator

• Computer Vista asks to be reactivated. Product key does not work.

  original title: my activation code does not work

  I have vista on my computer and now he asks me the activation code.  It is the same operating system that is installed with the computer, but the activation code will not work.  Help please.

  Hello

  If there were problems in office, read this;

  ·                         TRAIL of Activation of office

  ·                         you would have a preinstalled trail version of office installed

  There are only so many days use or use of the times with a version of office to test

  I'm sorry but the Office comes for free with a windows operating system

  You must purchase separately the Office

  and the product key on your computer/laptop is for the windows operating system not the office suite of applications

  link below is to the store of microsft office versions and prices

  http://store.Microsoft.com/Microsoft/Office/category/2

  You may also be interested to read everything and downloaded the free free office suite of applications office at the link below

  http://www.OpenOffice.org/

• Appstack - capture VMware Client plugin integration of 5.6/6.0 does not work

  So with the new customer integration plugin which essentially acts as a web services, I've updated the AppStack to include new versions of the integration Client plug-in. Unfortunately, it seems that this is not possible.

  After having captured and ensure that the vmware-csd process was not working, I advanced and provisioning of the AppStack. However, when I connected the desktop computer, attach the appstack I just put in service, I discovered that the integration of client plug-in has not start up when I navigate to the Web Client. Looking at the web console, I noticed that a web socket request was not due to of insoluble host vmware localhost name. I discovered that integration Client plug-in adds a vmware-localhost for the hosts file entry in the C:\Windows\System32\drivers\etc directory, but it forced me to empty the DNS before the hosts file entered into force.

  Even then, I found that the plugin would not work, so delve into files of IPC newspapers showed that the certificate is missing from the directory C:\ProgramData\VMware\CIP\csd\ssl. And I found that the certificate generated during installation is not captured in the AppStack.

  I saw the snapvol.cfg in the AppStack and, unfortunately, I found that she was set to exclude anything under the ProgramData\VMware directory. (EDIT: I learned, the UIA in writing also includes this disclaimer, so same Volumes accessible writable UIA does not properly with VMware CIP)

  Other thoughts on how to make the new version of the plugin of customer integration work with AppStack? The only thing I could think to script allvolattached.bat on the AppStack running vmware - csd.exe - install and ipconfig/flushdns, but generate keys and the certs takes time loooooooooooong. (This is a simple process threaded openssl, sort of SMP does not help)

  I decided, if I need to make this work, I'll have to copy the folder in question (C:\ProgramData\VMware\CIP\csd) to another location where it will seize in the Appstack and then use the allvolattached.bat script to copy the folder and its contents in the place and triggers the ipfconfig /flushdns to work. Have not really tested, but he will try.

  EDIT: confirmed that it does not work with the above method. I copied the folder CIP C:\ProgramData and allvolattached.bat script to copy the folder to the right place (Powershell Copy-Item C:\ProgramData\CIP\ C:\ProgramData\VMware\-Recurse) and trigger DNS flush (ipconfig/flushdns). Note for someone else who can try to...

• FLASH PLAYER 10.3.183.7 DOES NOT WORK IN FULL SCREEN

  FAO: MR. CHRIS CAMPBELL

  Hello Chris

  You probably get this from all angles, but the most recent update for Flash Player (10.3.183.7) JUST DO NOT WORK CORRECTLY.

  I keep my browsers updated and as of today (5 September 2011) Flash WORKS in "small pane in the browser" mode (for example, in Youtube) BUT VA VIRGIN AS SOON AS LARGER.

  Note that overlay the legends and pause / graphic reading DO all the work - it's only video decompression that is not - leave black and white screen.

  It's FireFox 7.0 both last Google Chrome: I carefully uninstalled & replace Flash form the links you have posted here and IT STILL DOES NOT WORK in full screen.

  You must release really NO new version of automatic update code like this that are not properly tested: it has mucked up watching a video for millions of people unnecessarily.

  Because of the new accelerator support?   who knows.    It's a living environment, the Toshiba Satellite Pro (we do not have all go and buy new PC every 10 weeks like you developers do) and it has a P4 and the integrated graphics card Intel 82852 standard: perfectly fine until last week.     But it has 64 MB graphic and I see that 10.3.183.7 now 'requires' 128 MB?       You can not just make assumptions like that: I bet that there are 50 million more RAM VGA PC there with 64 MB (or less).

  Adobe is a great product, but it is a complete and total ball * ls - up like we in England is called: Please excuse my Anglo-Saxon franchise.    Sorting, please.

  Mike, London, exasperated

  Hi Mike,.

  You could run into problems of video acceleration here.  I apologize and we do not have an internal bug against it (bug #2950542), which will be fixed in the next version of Flash Player.  In the meantime, you can try turning off hardware acceleration to see if that makes a difference?

  How to disable or enable hardware acceleration?

  Thank you

  Chris

• Export to Flash (.fla) file! -Media encoder does not work. Export failed!

  Hello

  A few weeks ago, I bought creative cloud and especially Flash Pro programs.

  I use a PC for Windows 8.1.

  I had just finished my project and wanted to export by clicking on file-> export-> export video. Now, a new Panel arrives and wants to know certain specific issues, as usual.

  After you click 'Export', he will now try to download this file to the Media Encoder. And that is the problem: Flash, then mentions that the file could not be imported to the Media Encoder, and at the same time the media encoder will say the same thing: "this file cannot be imported", or "this file cannot be read.

  I don't understand the media encoder cannot be not able to import a normal "FLA" - file and then put it in a .mov, .mp4 or whatever it is for Windows.

  I did not and do not want to use the quick time player, that the video would be able to play whith. And I can't imagine that the media encoder does not have Windows-compatible video formats to be does. But, as I mentioned before, it is not yet I would go that far, because he's not import the file!

  I already tried to reinstall all the programs, and each of them are also updated!

  So far I have not really found someone with this problem after doing a lot of research on the Internet!

  Thank you very much!!

  Your

  Rich

  You can open the video in any player after convert you, but adobe media encoder requiring some QuickTime plugins to work...

• Flash player does not work in Opera browser

  I can't use the drive in the Opera browser in Mac OS 10.9 but it works very well in Chrome, Firefox, and Safari. Help, please! I really want to use it I have Opera.

  This is the error:

  

  Download the FULL Offline Installer, and then perform a complete new installation per the instructions here: http://forums.adobe.com/thread/1343084

  Also, make sure that it is enabled, by typing 'plugins' in the address bar and check that Adobe Flash Player is not marked 'Activate' which means it is disabled.

• My computer works fine with 64 bit Vista, but a large part of my software does not work. Can I go back to 34-bit without having to clear everything and start over?

  I found that Vista 64 bit works well on my computer, but many software packages that I wish to continue to use will not work on the 64-bit version.  Is there a form any upward migration of 64 bit to 32 bit, which would not require destroying my entire system and starting over?  I really want to do that because I spent the last 2 months, getting 64-bit set so that it accepts all of my hardware.  Except for an upward migration, what about the possibility of a dual boot between 64 and 32?

  The game, October 7, 2010 19:47:32 + 0000, smoqui wrote:

  I found that Vista 64 bit works well on my computer, but many software packages that I wish to continue to use will not work on the 64-bit version.

  Which? It's rare.

  Is there a form any upward migration of 64 bit to 32 bit, which would not require destroying my entire system and starting over?  I really want to do that because I spent the last 2 months, getting 64-bit set so that it accepts all of my hardware.

  If you have a 64-bit version of Windows installation and you want to
  to go to a 32-bit installation of any version of Windows, no. One
  upgrade or downgrade is not possible. The only way to change the
  'number of bits' of Windows using a clean installation.

  Except for an upward migration, what about the possibility of a dual boot between 64 and 32?

  Sure. You can certainly do.

  Ken Blake (MS-MVP)

• Export Flash CS5 to Quicktime - why it does not work?

  I have a 2.93 Core 2 with 8 GB of RAM.

  I have a Flash video with text, graphics and animations. It's long 2 minutes. The SWF works fine. ActionScript 3.0. resolution 900 x 500.

  When I first attempted to export to quicktime, it gave a very close message that:

  «WARNING: Runtime Shared libraries (RSL) could not be associated with the file because of the publication settings Quicktime.»

  The wording may be a bit off, it's memory. Don't forget, that I'm not even publish at this point, I export. Not that I could make the difference.

  If, after the display of this message, the progress bar continues to fill up until it is completely filled, and then nothing happens. The juice bar is full, do nothing. For hours.

  So after that I've explored the parameters of publication, I found on the 'Flash' tab, a drop-down menu that allow me to choose "merge in code" as the integration of the Runtime Shared Library with the file. Then I hit publish. The progress bar fills up and disappears, press OK. Still, I can't find any movie file (or even the place where published GB of files) on my computer.

  After that, I try to export. The appeared before warning disappeared, but the progress bar always crashes when it is full, and no file is produced.

  One thing I thought is maybe it has to do with the number of images in my file. I inserted the action stop at the end, so the video stops and does not loop when previewing the SWF, however there are still many blank executives, which contain all objects or interpolations or something like that. The setting is currently 'stop encoding finally framework', which I guess means the last picture of my video before automatic shutdown. I can't find a way to make the empty frames after this point to disappear, I tell myself that it is part of the program itself.

  If anyone has other issues that will help in the face of this point, let me know.

  I searched these forums and is about 4 with the unanswered question, I can find no help anywhere else on the web either.

  If anyone knows of any other method to convert the SWF or FLA file about any other useful such as MPEG, AVI, etc., please let me know. I tried Media Encoder and After Effects, and none of them could help me to convert the file.

  
  Thanks in advance for any input about what you might have!

  Post edited by: elephantdesign

  When you select "when the last image is reached" for the option "Stop exporting", it will stop recording when the movie reaches the last frame of the movie. However, if you have "stop();" action in the context of the film, it stop the film, but continues to record the movie and the memory of your system runs. You can comment out the stop action or specify the duration of the recording control option "after a time' option 'stop export '. There is a tip on the optimization of the export of QuickTime in our site knowledge base: http://kb2.adobe.com/cps/401/kb401520.html. Thank you

• Adobe Flash Player installed, but the content does not work

  Adobe Flash Player works once I install it, but then evenually he stops working. I tried many methods of support, including downloading the tool from Microsoft to fix permission errors. I use Windows Vista Home Premium and the latest version of Adobe Flash Player.
  
  Somewhere, I noticed that there is an old thread like this with someone who has the same problem. I knew someone who responded showed a screenshot of what the permissions for the HKEY_CLASSES_ROOT should look like. Interestingly, they don't seem to match.
  
  Here's the screenshot: http://img508.imageshack.us/img508/9738/testrj8.jpg
  
  Please help me solve this problem. Without Adobe Flash Player, I can't do many things, like watching videos on YouTube.

  I solved the problem, thanks to this post:

  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?forumid=44&CATID=184&ThreadId = 1243464 & enterthread = y

• How to bypass the automatic connection in Vista. The SHIFT key after that logging does not work.

  I'll put up a laboratory of small kiosk for my students with a minimum account privs.  Sometimes I need to login with the administrator account to perform regular maintenance or solve a problem.  in xp, all I had to do was hold down the SHIFT key before the blue startup screen and all accounts (including my admin account) were visible.  This doesn't seem to work with vista.  is there a secret combo of keyboard shortcuts?  What should I do to ensure that both accounts visible?

  Hi Scentfromabove,

  Follow this step in order to bypass the automatic connection in vista.

  1. Click Start and type netplwiz in the start search box and press ENTER.
  2. check the users must enter a user name and password to use this computer
  3. click on apply and OK.

  I hope this helps.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Flash Player 17.0.0.188 does not work in Citrix in virtual environment

  Hello Forum,

  I support analyst for a company that uses Flash as a basic application to.

  Flash 17.0.0.188 is installed on an image in the Citrix environment that uses the redirection.

  Flash 16.x player works fine, but when upgrade us to 17.0.0.188 the *.sol file are not written in/Appdata/roaming... directory.

  There are some security flaws there are issue in version 17.0.0.188 and I wonder if upgrading security in the 17.0.0.188 version is causing these files is not to be written.

  Citrix Xenapp 6.5 environment image, = Windows 7, AD authentication user has read/write rights.

  Any help would be greatly appreciated.

  Flash Player cannot write or read local shared objects in the directory of the user redirected because ban us junctions crossing (flexible connections for non-Microsoft people) in the broker process.  This behavior has been disabled to address a vulnerability identified in some of the research of John Forshaw, in the broker of EI, earlier in the year.

  If you don't want to change your infrastructure, you can enable this behavior by adding the following parameter to mms.cfg:

  EnableInsecureJunctionBehavior = 1

  That said, you can put together probably in the name of the indicator that we don't really recommend this approach and disable this default attack surface.  There is a risk that an attacker on the network could create content that abuses of the fundamental issues with how Windows manages the junction Points to write to arbitrary locations.

  More information about Junction Points can be found here:

  https://support.Microsoft.com/en-us/KB/205524

  Junction Points (Windows)

  If you are going to live with this attack surface, it is probably worth your time to look at the James Forshaw talk on IE sandbox sand escapes, which have brought these changes:

  Dig for IE11 Sandbox escapes part 1 - YouTube

  Re: Need help Urgent: version Flash Player 17 (last updated) cannot write to change Data